D-Link DAP-2610 up to 2.06B08r099 contains an authenticated command injection vulnerability within the web interface at the /index.xgi endpoint. An attacker with authenticated access can exploit some parameters to execute arbitrary system commands.

A vulnerability was identified in D-Link DIR-825 3.00b32. Affected is the function tunnelsetparams of the file tunnel.c of the component rp-l2tp. The manipulation of the argument peerhostname  leads to out-of-bounds write. The attack may be initiated remotely.

D-Link DAP-1360 firmware version 6.14 and earlier contains an unauthenticated remote code execution vulnerability that allows remote attackers to execute arbitrary commands as root by sending crafted requests to the device's web management interface without valid credentials. Attackers can fully compromise the device to persistently modify its configuration and use it as a pivot point into the local network.

A vulnerability was determined in D-Link DIR-868L 2.01b05. This issue affects the function strcpy of the file /webfaauthentication.cgi of the component Authentication Handler. Executing a manipulation of the argument id/password can lead to stack-based buffer overflow. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability has been found in D-Link DIR-X1860Z up to 1.0.2.220120.165402. Affected is the function routerd.wificfgget/routerd.getrandkey of the component ubus JSON-RPC interface. Such manipulation leads to information disclosure. The attack must be carried out from within the local network. Upgrading to version 1.0.7.260821.161908 is able to address this issue. It is suggested to upgrade the affected component. This vulnerability only affects products that are no longer supported by the maintainer.

A security flaw has been discovered in D-Link DIR-X1860 and DIR-X1860Z up to 1.0.2.220120.165402. The impacted element is an unknown function of the file /ubus of the component routerd. The manipulation of the argument passwdset results in improper access controls. The attack must originate from the local network. The exploit has been released to the public and may be used for attacks.

A vulnerability was found in D-Link R95 BE95001.00.16. This vulnerability affects the function system of the file /bin/ssi of the component DHMAPI. The manipulation of the argument NTPServer results in os command injection. The attack can be executed remotely. The exploit has been made public and could be used.

A flaw has been found in D-Link DI-8300 16.07. The affected element is the function rzglasp of the file /rzgl.asp of the component CGI Service. This manipulation of the argument redircturl causes stack-based buffer overflow. Remote exploitation of the attack is possible. The exploit has been published and may be used.

A security flaw has been discovered in D-Link DI-8400 16.07. This affects the function ddnsasp of the file /ddns.asp of the component DDNS Configuration. Performing a manipulation of the argument serv/user/host/wild/mx/bmx/cust/ip results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks.

A weakness has been identified in D-Link DIR-882 up to 20260814. Impacted is the function main of the file /HNAP1/dllog.cgi of the component CGI Binary. Executing a manipulation can lead to information disclosure. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks.

A security flaw has been discovered in D-Link DSL-3782 2016-07-28. This issue affects the function system of the file /cgi-bin/NewGUI/Set/Diagnostics.asp of the component Diagnostics. Performing a manipulation of the argument Addr results in command injection. The attack may be initiated remotely. The exploit has been released to the public and may be used for attacks.

A vulnerability was identified in D-Link DWR-M921 1.1.52. This impacts the function formWsc of the file /boafrm/formWsc. The manipulation of the argument targetAPSsid leads to os command injection. The attack is possible to be carried out remotely. The exploit is publicly available and might be used.

A vulnerability was determined in D-Link DWR-M921 1.1.52. This affects the function formsysCmd of the file /boafrm/formsysCmd of the component Boa Dispatch Table. Executing a manipulation of the argument sysCmd can lead to os command injection. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in D-Link DWR-M921 1.1.52. The impacted element is the function system of the file /boafrm/formDiskPartition. Performing a manipulation of the argument devicename results in command injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used.

A vulnerability has been found in D-Link DWR-M921 1.1.52. The affected element is the function system of the file /boafrm/formDiskCreateShare. Such manipulation of the argument folderpath leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in D-Link DWR-M921 1.1.52. Impacted is the function system of the file /boafrm/formDiskFormat. This manipulation of the argument partition causes os command injection. The attack may be initiated remotely. The exploit has been published and may be used.

A weakness has been identified in D-Link DWR-M920 1.1.7. This issue affects the function sub41E60C of the file /boafrm/formPinManageSetup. This manipulation of the argument newPin causes os command injection. The attack can be initiated remotely. The exploit has been made available to the public and could be used for attacks.

A flaw has been found in D-Link DIR-878 120B05. This impacts the function SetWan3Settings of the component WAN Settings. This manipulation of the argument Primary/Secondary causes stack-based buffer overflow. Remote exploitation of the attack is possible.

A vulnerability was detected in D-Link DIR-878 120B05. This affects the function SetDynamicDNSIPv6Settings of the component Dynamic DNS IPv6 Settings. The manipulation of the argument IPv6Address/Hostname results in stack-based buffer overflow. The attack may be launched remotely.

A security flaw has been discovered in D-Link DIR-823G 1.0.2B0520181207. The impacted element is the function strcpy of the file /HNAP1/SetStaticRouteSettings of the component HNAP1. The manipulation of the argument PAddress/SubnetMask/Gateway results in stack-based buffer overflow. The attack can be launched remotely.

A vulnerability has been found in D-Link DIR-822A A101. Affected is the function tunnelsetparams of the component L2TP Control Message Parser. Such manipulation leads to out-of-bounds write. The attack can be launched remotely. The exploit has been disclosed to the public and may be used.

A flaw has been found in D-Link DIR-895L A1102b07. This impacts the function sendOffer/sendACK of the file udhcpcd/serverpacket.c of the component udhcpcd. This manipulation causes stack-based buffer overflow. The attack can only be done within the local network. The exploit has been published and may be used.

A vulnerability was identified in D-Link DIR-605 B1v202WWB03. This issue affects the function tunnelsetparams of the file progs.gpl/pppd.alpha/l2tp/tunnel.c of the component L2TP Control Message Parser. Such manipulation of the argument peerhostname  leads to off-by-one. The attack may be performed from remote. Attacks of this nature are highly complex. The exploitability is assessed as difficult. The exploit is publicly available and might be used.

A vulnerability was determined in D-Link DIR-822A A101. This vulnerability affects the function strcpy of the file udhcpcd/serverpacket.c of the component udhcpcd. This manipulation causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in D-Link DIR-895L A1102b07. This affects the function sendACK of the file udhcpcd/serverpacket.c of the component udhcpcd. The manipulation of the argument Hostname results in command injection. The attack can be executed remotely. The exploit has been made public and could be used.

A vulnerability was determined in D-Link DNS-320 ShareCenter 2.06B01. This affects an unknown part of the file /cgi/filesharing.cgi of the component File Sharing. Executing a manipulation of the argument fileurl can lead to os command injection. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized.

A vulnerability was found in D-Link DNS-340L 1.01B04. Affected by this issue is some unknown functionality of the file /cgi-bin/dropbox.cgi of the component CGI Handler. Performing a manipulation of the argument callbackurl/syncinterval results in os command injection. The attack can be initiated remotely. The exploit has been made public and could be used.

A vulnerability has been found in D-Link DNS-340L 1.01B04. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/addoncenter.cgi of the component Add-On Center. Such manipulation of the argument fname/furl/fflag/floginuser leads to os command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in D-Link DNS-340L and DNS-345 up to 20260717. This affects an unknown part of the file /cgi-bin/iscsimgr.cgi. Performing a manipulation of the argument alias/username/password/volumelocation results in os command injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used.

A vulnerability has been found in D-Link DNS-320L, DNS-327L, DNS-340L and DNS-345 up to 20260717. Affected by this issue is some unknown functionality of the file /cgi-bin/usbdevice.cgi of the component CGI Handler. Such manipulation of the argument fupsip leads to os command injection. The attack may be performed from remote. The exploit has been disclosed to the public and may be used.