Excessive CPU consumption in ParseAddress in net/mail

Due to the design of the name constraint checking algorithm, the processing time of some inputs scale non-linearly with respect to the size of the certificate. This affects programs which validate arbitrary certificate chains.

Quadratic complexity when parsing some invalid inputs in encoding/pem

Panic when validating certificates with DSA public keys in crypto/x509

BIG-IP has a vulnerability where an authenticated user of any role may be able to create administrative user accounts through an undisclosed request to Traffic Management User Interface (TMUI).

Impact:

This vulnerability may allow an authenticated attacker with network access to the BIG-IP management interface to escalate privileges by creating administrative accounts on the BIG-IP system. There is no data plane exposure; this is a control plane issue only.

Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

CVE-2024-42516 - this is the "complete" fix for the CVE-2023-38709 response splitting issue. The patch issued upstream for CVE-2023-38709 did not fix the vulnerability.

A security regression (CVE-2006-5051) was discovered in OpenSSH's server (sshd). There is a race condition which can lead sshd to handle some signals in an unsafe manner. An unauthenticated, remote attacker may be able to trigger it by failing to authenticate within a set time period.

Accessibility. A privacy issue was addressed by removing sensitive data.

In the Linux kernel, the following vulnerability has been resolved:

mm: fix zswap writeback race condition

The zswap writeback mechanism can cause a race condition resulting in memory corruption, where a swapped out page gets swapped in with data that was written to a different page.

The race unfolds like this: 1. a page with data A and swap offset X is stored in zswap 2. page A is removed off the LRU by zpool driver for writeback in zswap-shrink work, data for A is mapped by zpool driver 3. user space program faults and invalidates page entry A, offset X is considered free 4. kswapd stores page B at offset X in zswap (zswap could also be full, if so, page B would then be IOed to X, then skip step 5.) 5. entry A is replaced by B in tree->rbroot, this doesn't affect the local reference held by zswap-shrink work 6. zswap-shrink work writes back A at X, and frees zswap entry A 7. swapin of slot X brings A in memory instead of B

The fix: Once the swap page cache has been allocated (case ZSWAPSWAPCACHENEW), zswap-shrink work just checks that the local zswapentry reference is still the same as the one in the tree. If it's not the same it means that it's either been invalidated or replaced, in both cases the writeback is aborted because the local entry contains stale data.

Reproducer: I originally found this by running stress overnight to validate my work on the zswap writeback mechanism, it manifested after hours on my test machine. The key to make it happen is having zswap writebacks, so whatever setup pumps /sys/kernel/debug/zswap/writtenbackpages should do the trick.

In order to reproduce this faster on a vm, I setup a system with ~100M of available memory and a 500M swap file, then running stress --vm 1 --vm-bytes 300000000 --vm-stride 4000 makes it happen in matter of tens of minutes. One can speed things up even more by swinging /sys/module/zswap/parameters/maxpoolpercent up and down between, say, 20 and 1; this makes it reproduce in tens of seconds. It's crucial to set --vm-stride to something other than 4096 otherwise stress won't realize that memory has been corrupted because all pages would have the same data.

A flaw was found in rsync which could be triggered when rsync compares file checksums. This flaw allows an attacker to manipulate the checksum length (s2length) to cause a comparison between a checksum and uninitialized memory and leak one byte of uninitialized stack data at a time.

Cache poisoning due to weak PRNG

Issue summary: An application trying to decrypt CMS messages encrypted using password based encryption can trigger an out-of-bounds read and write.

Impact summary: This out-of-bounds read may trigger a crash which leads to Denial of Service for an application. The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service or Execution of attacker-supplied code.

Although the consequences of a successful exploit of this vulnerability could be severe, the probability that the attacker would be able to perform it is low. Besides, password based (PWRI) encryption support in CMS messages is very rarely used. For that reason the issue was assessed as Moderate severity according to our Security Policy.

The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue, as the CMS implementation is outside the OpenSSL FIPS module boundary.

It is possible to construct a zone such that some queries to it will generate responses containing numerous records in the Additional section. An attacker sending many such queries can cause either the authoritative server itself or an independent resolver to use disproportionate resources processing the queries. Zones will usually need to have been deliberately crafted to attack this exposure.

Last updated 25 February 2025

Android contains an unspecified vulnerability in the kernel that allows for remote code execution. This vulnerability resides in Linux Kernel and could impact other products, including but not limited to Android OS.

Abnormal termination of an application can a cause a denial of service.

Applications performing certificate name checks (e.g., TLS clients checking server certificates) may attempt to read an invalid memory address when comparing the expected name with an otherName subject alternative name of an X.509 certificate. This may result in an exception that terminates the application program.

Note that basic certificate chain validation (signatures, dates, ...) is not affected, the denial of service can occur only when the application also specifies an expected DNS name, Email address or IP address.

TLS servers rarely solicit client certificates, and even when they do, they generally don't perform a name check against a "reference identifier" (expected identity), but rather extract the presented identity after checking the certificate chain. So TLS servers are generally not affected and the severity of the issue is Moderate.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.1.1 and 1.0.2 are also not affected by this issue.

OpenSSL 3.3, 3.2, 3.1 and 3.0 are vulnerable to this issue.

OpenSSL 3.3 users should upgrade to OpenSSL 3.3.2

OpenSSL 3.2 users should upgrade to OpenSSL 3.2.3

OpenSSL 3.1 users should upgrade to OpenSSL 3.1.7

OpenSSL 3.0 users should upgrade to OpenSSL 3.0.15

If a server hosts a zone containing a “KEY” Resource Record, or a resolver DNSSEC-validates a “KEY” Resource Record from a DNSSEC-signed domain in cache, a client can exhaust resolver CPU resources by sending a stream of SIG(0) signed requests.

This vulnerability affects the following upstream's bind9 versions: 9.0.0 -> 9.11.37 9.16.0 -> 9.16.50 9.18.0 -> 9.18.27 9.19.0 -> 9.19.24

Last updated 20 July 2026

Last updated 20 July 2026

A use-after-free vulnerability was found in the Linux kernel's Netfilter subsystem in net/netfilter/nftablesapi.c. This flaw allows a local attacker with user access to cause a privilege escalation issue.

When a BIG-IP is configured with DNS caching (Such as a DNS profile with caching enabled, SSL Orchestrator, Advanced WAF DoS protection), undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A race condition vulnerability was discovered in how signals are handled by OpenSSH's server (sshd). If a remote attacker does not authenticate within a set time period, then sshd's SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server.

Accessibility. An authentication issue was addressed with improved state management.

Accessibility. An authentication issue was addressed with improved state management.

A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSLfreebuffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications.

The SSLfreebuffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use.

The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSLfreebuffers will succeed even though a record has only been partially processed and the buffer is still in use.

The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSLfreebuffers will succeed even though the buffer is still in use.

While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

OpenSSL 1.0.2 is also not affected by this issue.

OpenSSL 3.3, 3.2, 3.1, 3.0 and 1.1.1 are vulnerable to this issue.

OpenSSL 3.3 users should upgrade to OpenSSL 3.3.1 once it is released.

OpenSSL 3.2 users should upgrade to OpenSSL 3.2.2 once it is released.

OpenSSL 3.1 users should upgrade to OpenSSL 3.1.6 once it is released.

OpenSSL 3.0 users should upgrade to OpenSSL 3.0.14 once it is released.

OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1y once it is released (premium support customers only).

Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. The fix is also available in commit e5093133c3 (for 3.3), commit c88c3de510 (for 3.2), commit 704f725b96 (for 3.1) and commit b3f0eb0a29 (for 3.0) in the OpenSSL git repository. It is available to premium support customers in commit f7a045f314 (for 1.1.1).

This issue was reported on 10th April 2024 by William Ahern (Akamai). The fix was developed by Matt Caswell and Watson Ladd (Akamai).

Last updated 6 June 2026

Last updated 6 June 2026

Last updated 6 June 2026

Last updated 6 June 2026

Last updated 20 August 2025