On BIG-IP 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.6.0-11.6.5.1, the tmm crashes under certain circumstances when using the connector profile if a specific sequence of connections are made.
A flaw was found in computer hardware of the Intel microprocessors related to the instruction-side TLB (Translation Lookaside Buffer) that caches translations from guest (and host) virtual addresses into physical addresses.
This is a software fix that attempts to prevent exploitation of the hardware through preventing a hacker from creating an exploitable condition
Additional information:
https://access.redhat.com/security/vulnerabilities/ifu-page-mce
It is unexpected and not allowed to call TTY buffer helpers like ttyinsertflipstring concurrently. This may lead to crashes when ECHOing is enabled and concurrect writers call ptywrite in the meantime. In that case the two writers: the ECHOing from a workqueue and ptywrite from the process race and can overflow the corresponding TTY buffer.
An unprivileged local user could use this flaw to crash the system or, potentially, escalate their privileges on the system.
References: http://seclists.org/oss-sec/2014/q2/243
Cross-site scripting (XSS) vulnerability in list.jsp in the Configuration utility in F5 BIG-IP LTM, AFM, Analytics, APM, ASM, GTM, and Link Controller 11.2.1 through 11.5.1, AAM 11.4.0 through 11.5.1 PEM 11.3.0 through 11.5.1, PSM 11.2.1 through 11.4.1, WebAccelerator and WOM 11.2.1 through 11.3.0, and Enterprise Manager 3.0.0 through 3.1.1 allows remote attackers to inject arbitrary web script or HTML via unspecified parameters.
In BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.1-11.6.3.2, or 11.5.1-11.5.8 or Enterprise Manager 3.1.1, malformed requests to the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, may lead to disruption of TMUI services. This attack requires an authenticated user with any role (other than the No Access role). The No Access user role cannot login and does not have the access level to perform the attack.
A race condition which may occur when discarding malformed packets can result in BIND exiting due to a REQUIRE assertion failure in dispatch.c. Versions affected: BIND 9.11.0 -> 9.11.7, 9.12.0 -> 9.12.4-P1, 9.14.0 -> 9.14.2. Also all releases of the BIND 9.13 development branch and version 9.15.0 of the BIND 9.15 development branch and BIND Supported Preview Edition versions 9.11.3-S1 -> 9.11.7-S1.
On F5 BIG-IP 13.0.0-13.0.1, 12.1.0-12.1.3.3, 11.6.0-11.6.3.1, or 11.5.1-11.5.6, Enterprise Manager 3.1.1, BIG-IQ Centralized Management 5.0.0-5.1.0, BIG-IQ Cloud and Orchestration 1.0.0, or F5 iWorkflow 2.1.0-2.3.0 the big3d process does not irrevocably minimize group privileges at start up.
Multiple XML External Entity (XXE) vulnerabilities in the Configuration utility in F5 BIG-IP LTM, ASM, GTM, and Link Controller 11.0 through 11.6.0 and 10.0.0 through 10.2.4, AAM 11.4.0 through 11.6.0, ARM 11.3.0 through 11.6.0, Analytics 11.0.0 through 11.6.0, APM and Edge Gateway 11.0.0 through 11.6.0 and 10.1.0 through 10.2.4, PEM 11.3.0 through 11.6.0, PSM 11.0.0 through 11.4.1 and 10.0.0 through 10.2.4, and WOM 11.0.0 through 11.3.0 and 10.0.0 through 10.2.4 and Enterprise Manager 3.0.0 through 3.1.1 and 2.1.0 through 2.3.0 allow remote authenticated users to read arbitrary files and cause a denial of service via a crafted request, as demonstrated using (1) viewList or (2) deal elements.
Buffer overflow in the mcpq daemon in F5 BIG-IP systems 10.x before 10.2.4 HF12, 11.x before 11.2.1 HF15, 11.3.x, 11.4.x before 11.4.1 HF9, 11.5.x before 11.5.2 HF1, and 11.6.0 before HF4, and Enterprise Manager 2.1.0 through 2.3.0 and 3.x before 3.1.1 HF5 allows remote authenticated administrators to cause a denial of service via unspecified vectors.
An Information Disclosure vulnerability exists in NTP 4.2.7p25 private (mode 6/7) messages via a GETRESTRICT control message, which could let a malicious user obtain sensitive information.
Cross-site scripting (XSS) vulnerability in tmui/dashboard/echo.jsp in the Configuration utility in F5 BIG-IP LTM, APM, ASM, GTM, and Link Controller 11.0.0 before 11.6.0 and 10.1.0 through 10.2.4, AAM 11.4.0 before 11.6.0, AFM and PEM 11.3.0 before 11.6.0, Analytics 11.0.0 through 11.5.1, Edge Gateway, WebAccelerator, and WOM 11.0.0 through 11.3.0 and 10.1.0 through 10.2.4, and PSM 11.0.0 through 11.4.1 and 10.1.0 through 10.2.4 and Enterprise Manager 3.0.0 through 3.1.1 and 2.1.0 through 2.3.0 allows remote attackers to inject arbitrary web script or HTML via unspecified vectors.
F5 BIG-IP LTM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF1; BIG-IP AAM 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF1; BIG-IP DNS 12.x before 12.0.0 HF1; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.3.0; BIG-IP GTM 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, and 11.6.x before 11.6.1; BIG-IP PSM 11.3.x and 11.4.x before 11.4.1 HF10; Enterprise Manager 3.0.0 through 3.1.1; BIG-IQ Cloud and BIG-IQ Security 4.0.0 through 4.5.0; BIG-IQ Device 4.2.0 through 4.5.0; BIG-IQ ADC 4.5.0; BIG-IQ Centralized Management 4.6.0; and BIG-IQ Cloud and Orchestration 1.0.0 on the 3900, 6900, 8900, 8950, 11000, 11050, PB100 and PB200 platforms, when software SYN cookies are configured on virtual servers, allow remote attackers to cause a denial of service (High-Speed Bridge hang) via an invalid TCP segment.
Directory traversal vulnerability in the configuration utility in F5 BIG-IP before 12.0.0 and Enterprise Manager 3.0.0 through 3.1.1 allows remote authenticated users to access arbitrary files in the web root via unspecified vectors.
A stored cross-site scripting (XSS) vulnerability in the Configuration utility device name change page in BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, PSM, WebAccelerator, WOM and WebSafe version 12.0.0 - 12.1.2, 11.4.0 - 11.6.1, and 11.2.1 allows an authenticated user to inject arbitrary web script or HTML. Exploitation requires Resource Administrator or Administrator privileges, and it could cause the Configuration utility client to become unstable.
When BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.1.0-2.3.0, or Enterprise Manager 3.1.1 is licensed for Appliance Mode, Admin and Resource administrator roles can by-pass BIG-IP Appliance Mode restrictions to overwrite critical system files. Attackers of high privilege level are able to overwrite critical system files which bypasses security controls in place to limit TMSH commands. This is possible with an administrator or resource administrator roles when granted TMSH. Resource administrator roles must have TMSH access in order to perform this attack.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 6.0.0-6.0.1, 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.0.1-2.3.0, or Enterprise Manager 3.1.1 a BIG-IP user granted with tmsh access may cause the BIG-IP system to experience denial-of-service (DoS) when the BIG-IP user uses the tmsh utility to run the edit cli preference command and proceeds to save the changes to another filename repeatedly. This action utilises storage space on the /var partition and when performed repeatedly causes the /var partition to be full.
On BIG-IP versions 15.0.0-15.1.0, 14.0.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IQ versions 7.0.0, 6.0.0-6.1.0, and 5.0.0-5.4.0, iWorkflow version 2.3.0, and Enterprise Manager version 3.1.1, authenticated users granted TMOS Shell (tmsh) privileges are able access objects on the file system which would normally be disallowed by tmsh restrictions. This allows for authenticated, low privileged attackers to access objects on the file system which would not normally be allowed.
The BIG-IP 15.0.0-15.0.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5.1, BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1 configuration utility is vulnerable to Anti DNS Pinning (DNS Rebinding) attack.
In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.