An Authentication Bypass Using an Alternate Path or Channel vulnerability [CWE-288] in FortiOS, FortiManager, FortiAnalyzer, FortiProxy, FortiSwitchManager, FortiWeb may allow an attacker with a FortiCloud account and a registered device to log into other devices registered to other accounts, if FortiCloud SSO authentication is enabled on those devices.Please note that the FortiCloud SSO login feature is not enabled in default factory settings. However, when an administrator registers the device to FortiCare from the device's GUI, unless the administrator disables the toggle switch "Allow administrative login using FortiCloud SSO" in the registration page, FortiCloud SSO login is enabled upon registration. This vulnerability was found being exploited in the wild by two malicious FortiCloud accounts, which were locked out on 2026-01-22. In order to protect its customers from further exploit, Fortinet disabled FortiCloud SSO on FortiCloud side on 2026-01-26. It was re-enabled on 2026-01-27 and no longer supports login from devices running vulnerable versions. Consequently, customers must upgrade to the latest versions listed below for the FortiCloud SSO authentication to function.FortiManager Cloud, FortiAnalyzer Cloud, FortiGate Cloud are NOT impacted.Setups with Custom IdP for SSO instead of FortiCloud are not impacted (including setups using FortiAuthenticator as the Custom IdP)

An Authentication Bypass Using an Alternate Path or Channel vulnerability [CWE-288] in FortiOS, FortiManager, FortiAnalyzer, FortiProxy, FortiSwitchManager, FortiWeb may allow an attacker with a FortiCloud account and a registered device to log into other devices registered to other accounts, if FortiCloud SSO authentication is enabled on those devices.Please note that the FortiCloud SSO login feature is not enabled in default factory settings. However, when an administrator registers the device to FortiCare from the device's GUI, unless the administrator disables the toggle switch "Allow administrative login using FortiCloud SSO" in the registration page, FortiCloud SSO login is enabled upon registration. This vulnerability was found being exploited in the wild by two malicious FortiCloud accounts, which were locked out on 2026-01-22. In order to protect its customers from further exploit, Fortinet disabled FortiCloud SSO on FortiCloud side on 2026-01-26. It was re-enabled on 2026-01-27 and no longer supports login from devices running vulnerable versions. Consequently, customers must upgrade to the latest versions listed below for the FortiCloud SSO authentication to function.FortiManager Cloud, FortiAnalyzer Cloud, FortiGate Cloud are NOT impacted.Setups with Custom IdP for SSO instead of FortiCloud are not impacted (including setups using FortiAuthenticator as the Custom IdP)

A weak authentication in Fortinet FortiManager Cloud, FortiAnalyzer versions 7.6.0 through 7.6.1, 7.4.1 through 7.4.3, FortiAnalyzer Cloud versions 7.4.1 through 7.4.3, FortiManager versions 7.6.0 through 7.6.1, 7.4.1 through 7.4.3, FortiManager Cloud versions 7.4.1 through 7.4.3 allows attacker to execute unauthorized code or commands via a brute-force attack.

A weak authentication in Fortinet FortiOS versions 7.4.0 through 7.4.4, 7.2.0 through 7.2.8, 7.0.0 through 7.0.15, 6.4.0 through 6.4.15, FortiProxy versions 7.4.0 through 7.4.4, 7.2.0 through 7.2.10, 7.0.0 through 7.0.17, 2.0.0 through 2.0.14, FortiManager versions 7.6.0 through 7.6.1, 7.4.1 through 7.4.3, FortiManager Cloud versions 7.4.1 through 7.4.3, FortiAnalyzer Cloud versions 7.4.1 through 7.4.3 allows attacker to execute unauthorized code or commands via a brute-force attack.

A stack-based buffer overflow vulnerability in Fortinet FortiAnalyzer 7.4.0 through 7.4.3, FortiAnalyzer 7.2.0 through 7.2.5, FortiAnalyzer 7.0.0 through 7.0.12, FortiAnalyzer 6.4.0 through 6.4.14, FortiAnalyzer Cloud 7.4.1 through 7.4.3, FortiAnalyzer Cloud 7.2.1 through 7.2.5, FortiAnalyzer Cloud 7.0.1 through 7.0.11, FortiAnalyzer Cloud 6.4 all versions, FortiManager 7.4.0 through 7.4.3, FortiManager 7.2.0 through 7.2.5, FortiManager 7.0.0 through 7.0.12, FortiManager 6.4.0 through 6.4.14, FortiManager Cloud 7.4.1 through 7.4.3, FortiManager Cloud 7.2.1 through 7.2.5, FortiManager Cloud 7.0.1 through 7.0.11, FortiManager Cloud 6.4 all versions allows attacker to execute unauthorized code or commands via specially crafted packets.

A improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Fortinet FortiManager 7.6.0 through 7.6.1, FortiManager 7.4.1 through 7.4.3, FortiManager Cloud 7.4.1 through 7.4.3, FortiOS 7.6.0, FortiOS 7.4.0 through 7.4.4, FortiOS 7.2.0 through 7.2.9, FortiOS 7.0.0 through 7.0.15, FortiOS 6.4.0 through 6.4.15, FortiProxy 7.4.0 through 7.4.5, FortiProxy 7.2.0 through 7.2.11, FortiProxy 7.0.0 through 7.0.18, FortiProxy 2.0 all versions, FortiProxy 1.2 all versions, FortiProxy 1.1 all versions, FortiProxy 1.0 all versions may allow a remote authenticated attacker with access to the security fabric interface and port to write arbitrary files or a remote unauthenticated attacker to delete an arbitrary folder

An operation on a resource after expiration or release in Fortinet FortiManager 6.4.12 through 7.4.0 allows an attacker to gain improper access to FortiGate via valid credentials.

A improper limitation of a pathname to a restricted directory ('path traversal') vulnerability in Fortinet FortiRecorder 7.2.0 through 7.2.1, FortiRecorder 7.0.0 through 7.0.4, FortiVoice 7.0.0 through 7.0.4, FortiVoice 6.4.0 through 6.4.9, FortiVoice 6.0 all versions, FortiWeb 7.6.0, FortiWeb 7.4.0 through 7.4.4, FortiWeb 7.2 all versions, FortiWeb 7.0 all versions, FortiWeb 6.4 all versions allows attacker to escalate privilege via specially crafted packets.

A Use After Free (CWE-416) vulnerability in FortiManager version 7.0.0, version 6.4.5 and below, version 6.2.7 and below, version 6.0.10 and below, version 5.6.10 and below, version 5.4.7 and below, version 5.2.10 and below, version 5.0.12 and below and FortiAnalyzer version 7.0.0, version 6.4.5 and below, version 6.2.7 and below, version 6.0.10 and below, version 5.6.10 and below, version 5.4.7 and below, version 5.3.11, version 5.2.10 to 5.2.4 fgfmsd daemon may allow a remote, non-authenticated attacker to execute unauthorized code as root via sending a specifically crafted request to the fgfm port of the targeted device.

A missing authentication for critical function in Fortinet FortiManager version 7.4.0 through 7.4.2, 7.2.0 through 7.2.4, 7.0.0 through 7.0.11, 6.4.0 through 6.4.14, FortiPAM version 1.2.0, 1.1.0 through 1.1.2, 1.0.0 through 1.0.3, FortiProxy version 7.4.0 through 7.4.2, 7.2.0 through 7.2.9, 7.0.0 through 7.0.17, 2.0.0 through 2.0.14, 1.2.0 through 1.2.13, 1.1.0 through 1.1.6, 1.0.0 through 1.0.7, FortiSwitchManager version 7.2.0 through 7.2.3, 7.0.0 through 7.0.3, FortiPortal version 6.0.0 through 6.0.14, FortiOS version 7.4.0 through 7.4.3, 7.2.0 through 7.2.7, 7.0.0 through 7.0.14, 6.4.0 through 6.4.15, 6.2.0 through 6.2.16, 6.0.0 through 6.0.18 allows attacker to execute unauthorized code or commands via specially crafted packets.

A missing authentication for critical function in FortiManager 7.6.0, FortiManager 7.4.0 through 7.4.4, FortiManager 7.2.0 through 7.2.7, FortiManager 7.0.0 through 7.0.12, FortiManager 6.4.0 through 6.4.14, FortiManager 6.2.0 through 6.2.12, Fortinet FortiManager Cloud 7.4.1 through 7.4.4, FortiManager Cloud 7.2.1 through 7.2.7, FortiManager Cloud 7.0.1 through 7.0.12, FortiManager Cloud 6.4.1 through 6.4.7 allows attacker to execute arbitrary code or commands via specially crafted requests.

A missing authentication for critical function vulnerability [CWE-306] in FortiManager fgfmd daemon may allow a remote unauthenticated attacker to execute arbitrary code or commands via specially crafted requests.

Reports have shown this vulnerability to be exploited in the wild.

A improper access control in Fortinet FortiManager version 7.4.0, version 7.2.0 through 7.2.3, version 7.0.0 through 7.0.10, version 6.4.0 through 6.4.13, 6.2 all versions allows attacker to execute unauthorized code or commands via specially crafted HTTP requests.

An improper access control vulnerability [CWE-284] in FortiManager management interface 7.2.0 through 7.2.2, 7.0.0 through 7.0.7, 6.4.0 through 6.4.11, 6.2 all versions, 6.0 all versions may allow a remote and authenticated attacker with at least "device management" permission on his profile and belonging to a specific ADOM to add and delete CLI script on other ADOMs

An improper neutralization of formula elements in a csv file in Fortinet FortiManager version 6.4.3 and below, 6.2.7 and below allows attacker to execute arbitrary commands via crafted IPv4 field in policy name, when exported as excel file and opened unsafely on the victim host.

A vulnerability exists in in FortiManager 5.2.1 and earlier and 5.0.10 and earlier in the WebUI FTP backup page

A Command Injection vulnerability exists in FortiManager 5.2.1 and earlier and FortiManager 5.0.10 and earlier via unspecified vectors, which could let a malicious user run systems commands when executing a report.

Lack of root file system integrity checking in Fortinet FortiManager VM application images of 6.2.0, 6.0.6 and below may allow an attacker to implant third-party programs by recreating the image through specific methods.

SQL injection vulnerability in Fortinet FortiManager 5.0.x before 5.0.11, 5.2.x before 5.2.2 allows remote attackers to execute arbitrary commands via unspecified parameters.