A buffer overflow vulnerability in the CGI program in the Zyxel GS1900-48 switch firmware version V2.80(AAHN.1)C0 and earlier could allow an authenticated, LAN-based attacker with administrator privileges to cause denial of service (DoS) conditions via a crafted URL.
A post-authentication command injection vulnerability in the CGI program in the Zyxel GS1900-48 switch firmware version V2.80(AAHN.1)C0 and earlier could allow an authenticated, LAN-based attacker with administrator privileges to execute some operating system (OS) commands on an affected device by sending a crafted HTTP request.
An insufficient entropy vulnerability caused by the improper use of a randomness function with low entropy for web authentication tokens generation exists in the Zyxel GS1900-10HP firmware version V2.80(AAZI.0)C0. This vulnerability could allow a LAN-based attacker a slight chance to gain a valid session token if multiple authenticated sessions are alive.
The improper privilege management vulnerability in the Zyxel GS1900-24EP switch firmware version V2.70(ABTO.5) could allow an authenticated local user with read-only access to modify system settings on a vulnerable device.
REJECT This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.
An insufficient entropy vulnerability caused by the improper use of randomness sources with low entropy for RSA key pair generation was found in Zyxel GS1900 series firmware versions prior to V2.70. This vulnerability could allow an unauthenticated attacker to retrieve a private key by factoring the RSA modulus N in the certificate of the web administration interface.
A vulnerability in the 'libsal.so' of the Zyxel GS1900 series firmware version 2.60 could allow an authenticated local user to execute arbitrary OS commands via a crafted function call.
A vulnerability in the TFTP client of Zyxel GS1900 series firmware, XGS1210 series firmware, and XGS1250 series firmware, which could allow an authenticated LAN user to execute arbitrary OS commands via the GUI of the vulnerable device.
A vulnerability was found in the CGI program in Zyxel GS1900-8 firmware version V2.60, that did not properly sterilize packet contents and could allow an authenticated, local user to perform a cross-site scripting (XSS) attack via a crafted LLDP packet.
An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. User accounts created through the web interface of the device, when given non-admin level privileges, have the same level of privileged access as administrators when connecting to the device via SSH (while their permissions via the web interface are in fact restricted). This allows normal users to obtain the administrative password by running the tech-support command via the CLI: this contains the encrypted passwords for all users on the device. As these passwords are encrypted using well-known and static parameters, they can be decrypted and the original passwords (including the administrator password) can be obtained.
An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. Due to lack of input validation in the cmdsystracerouteexec(), cmdsysarpclear(), and cmdsyspingexec() functions in the libclicmd.so library contained in the firmware, an attacker could leverage these functions to call system() and execute arbitrary commands on the switches. (Note that these functions are currently not called in this version of the firmware, however an attacker could use other vulnerabilities to finally use these vulnerabilities to gain code execution.)
An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. The firmware image contains encrypted passwords that are used to authenticate users wishing to access a diagnostics or password-recovery menu. Using the hardcoded cryptographic key found elsewhere in the firmware, these passwords can be decrypted. This is related to fdssyspassDebugPasswdret() and fdssyspassRecoveryPasswdret() in libfds.so.0.0.
An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. The firmware hashes and encrypts passwords using a hardcoded cryptographic key in salutilstrencrypt() in libsal.so.0.0. The parameters (salt, IV, and key data) are used to encrypt and decrypt all passwords using AES256 in CBC mode. With the parameters known, all previously encrypted passwords can be decrypted. This includes the passwords that are part of configuration backups or otherwise embedded as part of the firmware.
An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. Through an undocumented sequence of keypresses, undocumented functionality is triggered. A diagnostics shell is triggered via CTRL-ALT-t, which prompts for the password returned by fdssyspassDebugPasswdret(). The firmware contains access control checks that determine if remote users are allowed to access this functionality. The function that performs this check (fdssysremoteDebugEnableret in libfds.so) always return TRUE with no actual checks performed. The diagnostics menu allows for reading/writing arbitrary registers and various other configuration parameters which are believed to be related to the network interface chips.
An issue was discovered on Zyxel GS1900 devices with firmware before 2.50(AAHH.0)C0. By sending a signal to the CLI process, undocumented functionality is triggered. Specifically, a menu can be triggered by sending the SIGQUIT signal to the CLI application (e.g., through CTRL+\ via SSH). The access control check for this menu does work and prohibits accessing the menu, which contains "Password recovery for specific user" options. The menu is believed to be accessible using a serial console.
The kernel in Cisco TelePresence Server 3.0 through 4.2(4.18) on Mobility Services Engine (MSE) 8710 devices allows remote attackers to cause a denial of service (panic and reboot) via a crafted sequence of IPv6 packets, aka Bug ID CSCuu46673.
Cisco TelePresence Server 4.1(2.29) through 4.2(4.17) on 7010; Mobility Services Engine (MSE) 8710; Multiparty Media 310, 320, and 820; and Virtual Machine (VM) devices allows remote attackers to cause a denial of service (memory consumption or device reload) via crafted HTTP requests that are not followed by an unspecified negotiation, aka Bug ID CSCuv47565.
Cisco TelePresence Server 3.1 on 7010, Mobility Services Engine (MSE) 8710, Multiparty Media 310 and 320, and Virtual Machine (VM) devices allows remote attackers to cause a denial of service (device reload) via malformed STUN packets, aka Bug ID CSCuv01348.
The IKEv2 implementation in Cisco IOS 15.0 through 15.6 and IOS XE 3.3 through 3.17 allows remote attackers to cause a denial of service (device reload) via fragmented packets, aka Bug ID CSCux38417.
Cisco IOS 15.3 and 15.4, Cisco IOS XE 3.8 through 3.11, and Cisco Unified Communications Manager allow remote attackers to cause a denial of service (device reload) via malformed SIP messages, aka Bug ID CSCuj23293.
The Smart Install client implementation in Cisco IOS 12.2, 15.0, and 15.2 and IOS XE 3.2 through 3.7 allows remote attackers to cause a denial of service (device reload) via crafted image list parameters in a Smart Install packet, aka Bug ID CSCuv45410.
Cisco IOS 15.0 through 15.5 and IOS XE 3.3 through 3.16 allow remote attackers to cause a denial of service (device reload) via a crafted DHCPv6 Relay message, aka Bug ID CSCus55821.
Sure Start on HP Commercial PCs 2015 allows local users to cause a denial of service (BIOS recovery failure) by leveraging administrative access.
Cisco NX-OS 4.0 through 6.1 on Nexus 1000V 3000, 4000, 5000, 6000, and 7000 devices and Unified Computing System (UCS) platforms allows remote attackers to cause a denial of service (TCP stack reload) by sending crafted TCP packets to a device that has a TIMEWAIT TCP session, aka Bug ID CSCub70579.
Cisco NX-OS 7.1(1)N1(1) on Nexus 5500, 5600, and 6000 devices does not properly validate PDUs in SNMP packets, which allows remote attackers to cause a denial of service (SNMP application restart) via a crafted packet, aka Bug ID CSCut84645.
Cisco NX-OS 6.0(2)U6(1) through 6.0(2)U6(5) on Nexus 3000 devices and 6.0(2)A6(1) through 6.0(2)A6(5) and 6.0(2)A7(1) on Nexus 3500 devices has hardcoded credentials, which allows remote attackers to obtain root privileges via a (1) TELNET or (2) SSH session, aka Bug ID CSCuy25800.
Cisco Unified Communications Manager (aka CallManager) 9.1(2.10000.28), 10.5(2.10000.5), 10.5(2.12901.1), and 11.0(1.10000.10); Unified Communications Manager IM & Presence Service 10.5(2); Unified Contact Center Express 11.0(1); and Unity Connection 10.5(2) store a cleartext encryption key, which allows local users to obtain sensitive information via unspecified vectors, aka Bug ID CSCuv85958.
Cisco Unified Communications Manager 11.5(0.98000.480) allows remote authenticated users to obtain sensitive database table-name and entity-name information via a direct request to an unspecified URL, aka Bug ID CSCuy11098.
Cisco Application Policy Infrastructure Controller (APIC) devices with software before 1.0(3h) and 1.1 before 1.1(1j) and Nexus 9000 ACI Mode switches with software before 11.0(3h) and 11.1 before 11.1(1j) allow remote authenticated users to bypass intended RBAC restrictions via crafted REST requests, aka Bug ID CSCut12998.
Cisco Nexus 9000 Application Centric Infrastructure (ACI) Mode switches with software before 11.0(1c) allow remote attackers to cause a denial of service (device reload) via an IPv4 ICMP packet with the IP Record Route option, aka Bug ID CSCuq57512.