In Pulsar Functions Worker, authenticated users can upload functions in jar or nar files. These files, essentially zip files, are extracted by the Functions Worker. However, if a malicious file is uploaded, it could exploit a directory traversal vulnerability. This occurs when the filenames in the zip files, which aren't properly validated, contain special elements like "..", altering the directory path. This could allow an attacker to create or modify files outside of the designated extraction directory, potentially influencing system behavior. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true".

This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0.

2.10 Pulsar Function Worker users should upgrade to at least 2.10.6. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.4. 3.0 Pulsar Function Worker users should upgrade to at least 3.0.3. 3.1 Pulsar Function Worker users should upgrade to at least 3.1.3. 3.2 Pulsar Function Worker users should upgrade to at least 3.2.1.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

Improper input validation in the Pulsar Function Worker allows a malicious authenticated user to execute arbitrary Java code on the Pulsar Function worker, outside of the sandboxes designated for running user-provided functions. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true".

This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0.

2.10 Pulsar Function Worker users should upgrade to at least 2.10.6. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.4. 3.0 Pulsar Function Worker users should upgrade to at least 3.0.3. 3.1 Pulsar Function Worker users should upgrade to at least 3.1.3. 3.2 Pulsar Function Worker users should upgrade to at least 3.2.1.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

If Apache Pulsar is configured to authenticate clients using tokens based on JSON Web Tokens (JWT), the signature of the token is not validated if the algorithm of the presented token is set to "none". This allows an attacker to connect to Pulsar instances as any user (incl. admins).

Incorrect Authorization vulnerability in Apache Software Foundation Apache Pulsar.

This issue affects Apache Pulsar: before 2.10.4, and 2.11.0.

When a client connects to the Pulsar Function Worker via the Pulsar Proxy where the Pulsar Proxy uses mTLS authentication to authenticate with the Pulsar Function Worker, the Pulsar Function Worker incorrectly performs authorization by using the Proxy's role for authorization instead of the client's role, which can lead to privilege escalation, especially if the proxy is configured with a superuser role.

The recommended mitigation for impacted users is to upgrade the Pulsar Function Worker to a patched version.

2.10 Pulsar Function Worker users should upgrade to at least 2.10.4. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.1. 3.0 Pulsar Function Worker users are unaffected. Any users running the Pulsar Function Worker for 2.9. and earlier should upgrade to one of the above patched versions.

Apache Pulsar's MultiRolesTokenAuthorizationProvider authorizes a client with all roles listed in a claim of its JSON Web Token (JWT). The provider is intended for use with token authentication, which verifies the token before authorization. The provider did not verify the token itself: it parsed the token's claims with the signature removed and trusted that authentication had already checked it.

When authentication and authorization are enabled with a non-empty anonymousUserRole setting, some HTTP requests whose credentials fail authentication are not rejected, but are handled as requests of the anonymous user role. For the broker's HTTP endpoints, such as the admin REST API, this fallback applies to requests that do not name an authentication method and requires strictAuthMethod to be false (the default) where that setting is available. For the WebSocket API, failed credentials can also fall back to the anonymous user role; this path does not enforce strictAuthMethod. The authentication data kept for such a request still contained the request's Authorization header. MultiRolesTokenAuthorizationProvider then read the bearer token from that header without verifying its signature and authorized the request with the roles in the token's role claim.

As a result, in deployments that use MultiRolesTokenAuthorizationProvider together with a non-empty anonymousUserRole and that permit this fallback, an unauthenticated client can send an HTTP request, for example to the admin REST API or the WebSocket API, with a forged or unsigned token that lists arbitrary roles, and be authorized with those roles. The impact can include super-user access when the token lists a role configured in superUserRoles, allowing the client to read and change tenants, namespaces, topics, permissions and broker configuration. No valid credentials are required.

Deployments are not affected if they use the default authorization provider (PulsarAuthorizationProvider) or another authorization provider, or if anonymousUserRole is not set (the default). Requests that authenticate successfully with a valid token are not affected, because the token that MultiRolesTokenAuthorizationProvider reads is the token that authentication verified. Connections that use the Pulsar binary protocol are not affected by this issue, because the broker does not keep client authentication data for connections that it assigns to the anonymous user role.

In fixed versions, MultiRolesTokenAuthorizationProvider obtains roles only from tokens that the configured token authentication provider has verified, using its configured keys and validation settings. Broker HTTP requests that are assigned to the anonymous user role are authorized only as that role, and invalid tokens cannot supply additional roles to WebSocket requests. The broker fails to start if MultiRolesTokenAuthorizationProvider is configured with authorization enabled but without a token authentication provider.

This issue affects Apache Pulsar versions from 2.8.1 before 4.0.14 and from 4.1.0 before 4.2.5.

- 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

Users who cannot upgrade immediately can remove the anonymousUserRole setting from the broker and WebSocket service configurations, or restrict network access to the HTTP endpoints of these services to trusted clients.

The Pulsar Functions Worker includes a capability that permits authenticated users to create functions where the function's implementation is referenced by a URL. The supported URL schemes include "file", "http", and "https". When a function is created using this method, the Functions Worker will retrieve the implementation from the URL provided by the user. However, this feature introduces a vulnerability that can be exploited by an attacker to gain unauthorized access to any file that the Pulsar Functions Worker process has permissions to read. This includes reading the process environment which potentially includes sensitive information, such as secrets. Furthermore, an attacker could leverage this vulnerability to use the Pulsar Functions Worker as a proxy to access the content of remote HTTP and HTTPS endpoint URLs. This could also be used to carry out denial of service attacks. This vulnerability also applies to the Pulsar Broker when it is configured with "functionsWorkerEnabled=true".

This issue affects Apache Pulsar versions from 2.4.0 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0.

2.10 Pulsar Function Worker users should upgrade to at least 2.10.6. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.4. 3.0 Pulsar Function Worker users should upgrade to at least 3.0.3. 3.1 Pulsar Function Worker users should upgrade to at least 3.1.3. 3.2 Pulsar Function Worker users should upgrade to at least 3.2.1.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The updated versions of Pulsar Functions Worker will, by default, impose restrictions on the creation of functions using URLs. For users who rely on this functionality, the Function Worker configuration provides two configuration keys: "additionalEnabledConnectorUrlPatterns" and "additionalEnabledFunctionsUrlPatterns". These keys allow users to specify a set of URL patterns that are permitted, enabling the creation of functions using URLs that match the defined patterns. This approach ensures that the feature remains available to those who require it, while limiting the potential for unauthorized access and exploitation.

Apache Pulsar shadow topics (PIP-180) are topics that read the stored messages of a source topic from that topic's managed ledger. The source topic is selected by setting the reserved topic property PULSAR.SHADOWSOURCE. The admin REST API accepts this property when creating a non-partitioned or partitioned topic and when updating the properties of an existing topic. On these paths the broker authorizes the caller only against the topic being created or updated. It does not authorize the caller against the source topic named in the property. The existing authorization for shadow topic configuration (the SHADOWTOPIC topic policy on the source topic) is applied only to the source-side shadow topics admin API, not to these paths.

As a result, an authenticated user who is allowed to create topics or update topic properties in one tenant can bind a topic in that tenant to a persistent topic in any other tenant. With the default authorization provider, these operations require the tenant admin role for the user's own tenant. The user does not need any permission on the source topic, its namespace or its tenant. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be different.

The user can then consume from the shadow topic, using only permissions on their own topic, and receive retained messages that were published to the source topic in the other tenant. Exposure is limited to messages that are still retained and readable in the source topic's ledgers; messages protected with client-side end-to-end encryption cannot be decrypted without the encryption keys. A producer on the shadow topic can also register a new schema version under the source topic's schema, subject to the schema compatibility settings; existing schema versions are not replaced.

In addition, the shadow topic's managed ledger applies its own retention, trimming, offloading and deletion to the source topic's ledgers. This can permanently delete the source topic's ledger data from BookKeeper and from tiered storage, regardless of the source topic's own subscriptions and retention policy, including messages that have not yet been acknowledged. Deleting the shadow topic can also delete the source topic's ledgers. This data loss can also affect shadow topics that were configured intentionally by administrators.

This issue affects Apache Pulsar versions from 3.0.0 before 4.0.14 and from 4.1.0 before 4.2.5. Apache Pulsar 2.x releases do not contain the shadow topic implementation.

- 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

In the fixed versions, shadow topics are disabled by default and are controlled by the new broker configuration setting enableShadowTopics (default false). While it is disabled, the broker rejects creating shadow topics, setting the PULSAR.SHADOWSOURCE property, and loading or replicating to existing shadow topics. Deployments that use shadow topics must set enableShadowTopics=true in the broker configuration of all brokers after upgrading; otherwise existing shadow topics will not be loaded. When shadow topics are enabled, binding a shadow topic to a source topic in a different tenant requires the superuser role. The fixed versions also prevent a shadow topic from deleting or trimming the ledgers and offloaded data of its source topic.

Affected versions provide no configuration option to disable shadow topics. Users who cannot upgrade immediately can reduce exposure by granting the tenant admin role only to trusted principals.

Improper Authentication vulnerability in Apache Pulsar Proxy allows an attacker to connect to the /proxy-stats endpoint without authentication. The vulnerable endpoint exposes detailed statistics about live connections, along with the capability to modify the logging level of proxied connections without requiring proper authentication credentials.

This issue affects Apache Pulsar versions from 2.6.0 to 2.10.5, from 2.11.0 to 2.11.2, from 3.0.0 to 3.0.1, and 3.1.0.

The known risks include exposing sensitive information such as connected client IP and unauthorized logging level manipulation which could lead to a denial-of-service condition by significantly increasing the proxy's logging overhead. When deployed via the Apache Pulsar Helm chart within Kubernetes environments, the actual client IP might not be revealed through the load balancer's default behavior, which typically obscures the original source IP addresses when externalTrafficPolicy is being configured to "Cluster" by default. The /proxy-stats endpoint contains topic level statistics, however, in the default configuration, the topic level statistics aren't known to be exposed.

2.10 Pulsar Proxy users should upgrade to at least 2.10.6. 2.11 Pulsar Proxy users should upgrade to at least 2.11.3. 3.0 Pulsar Proxy users should upgrade to at least 3.0.2. 3.1 Pulsar Proxy users should upgrade to at least 3.1.1.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions. Additionally, it's imperative to recognize that the Apache Pulsar Proxy is not intended for direct exposure to the internet. The architectural design of Pulsar Proxy assumes that it will operate within a secured network environment, safeguarded by appropriate perimeter defenses.

Incorrect Authorization vulnerability in Apache Software Foundation Apache Pulsar Function Worker.

This issue affects Apache Pulsar: before 2.10.4, and 2.11.0.

Any authenticated user can retrieve a source's configuration or a sink's configuration without authorization. Many sources and sinks contain credentials in the configuration, which could lead to leaked credentials. This vulnerability is mitigated by the fact that there is not a known way for an authenticated user to enumerate another tenant's sources or sinks, meaning the source or sink name would need to be guessed in order to exploit this vulnerability.

The recommended mitigation for impacted users is to upgrade the Pulsar Function Worker to a patched version.

2.10 Pulsar Function Worker users should upgrade to at least 2.10.4. 2.11 Pulsar Function Worker users should upgrade to at least 2.11.1. 3.0 Pulsar Function Worker users are unaffected. Any users running the Pulsar Function Worker for 2.9. and earlier should upgrade to one of the above patched versions.

Incorrect Authorization vulnerability in Apache Software Foundation Apache Pulsar Broker's Rest Producer allows authenticated user with a custom HTTP header to produce a message to any topic using the broker's admin role. This issue affects Apache Pulsar Brokers: from 2.9.0 through 2.9.5, from 2.10.0 before 2.10.4, 2.11.0.

The vulnerability is exploitable when an attacker can connect directly to the Pulsar Broker. If an attacker is connecting through the Pulsar Proxy, there is no known way to exploit this authorization vulnerability.

There are two known risks for affected users. First, an attacker could produce garbage messages to any topic in the cluster. Second, an attacker could produce messages to the topic level policies topic for other tenants and influence topic settings that could lead to exfiltration and/or deletion of messages for other tenants.

2.8 Pulsar Broker users and earlier are unaffected. 2.9 Pulsar Broker users should upgrade to one of the patched versions. 2.10 Pulsar Broker users should upgrade to at least 2.10.4. 2.11 Pulsar Broker users should upgrade to at least 2.11.1. 3.0 Pulsar Broker users are unaffected.

The Apache Pulsar C++ Client does not verify peer TLS certificates when making HTTPS calls for the OAuth2.0 Client Credential Flow, even when tlsAllowInsecureConnection is disabled via configuration. This vulnerability allows an attacker to perform a man in the middle attack and intercept and/or modify the GET request that is sent to the ClientCredentialFlow 'issuer url'. The intercepted credentials can be used to acquire authentication data from the OAuth2.0 server to then authenticate with an Apache Pulsar cluster. An attacker can only take advantage of this vulnerability by taking control of a machine 'between' the client and the server. The attacker must then actively manipulate traffic to perform the attack. The Apache Pulsar Python Client wraps the C++ client, so it is also vulnerable in the same way. This issue affects Apache Pulsar C++ Client and Python Client versions 2.7.0 to 2.7.4; 2.8.0 to 2.8.3; 2.9.0 to 2.9.2; 2.10.0 to 2.10.1; 2.6.4 and earlier. Any users running affected versions of the C++ Client or the Python Client should rotate vulnerable OAuth2.0 credentials, including clientid and clientsecret. 2.7 C++ and Python Client users should upgrade to 2.7.5 and rotate vulnerable OAuth2.0 credentials. 2.8 C++ and Python Client users should upgrade to 2.8.4 and rotate vulnerable OAuth2.0 credentials. 2.9 C++ and Python Client users should upgrade to 2.9.3 and rotate vulnerable OAuth2.0 credentials. 2.10 C++ and Python Client users should upgrade to 2.10.2 and rotate vulnerable OAuth2.0 credentials. 3.0 C++ users are unaffected and 3.0 Python Client users will be unaffected when it is released. Any users running the C++ and Python Client for 2.6 or less should upgrade to one of the above patched versions.

When a configured proxy role sends a request to the broker on behalf of another user (the original principal), the broker is designed to authorize both the proxy role and the original principal and to allow the request only if both are authorized, so that the original principal cannot exceed its own permissions. Two flaws weakened this check.

First, the original principal was authorized with the proxy's authentication data instead of its own. On the admin REST API of the broker and the functions worker, this applied to every proxied request. On the Pulsar binary protocol, it applied when the proxy did not forward the client's credentials to the broker, which was the default of the Pulsar proxy in the affected versions. Authorization providers that resolve permissions from the role name only, such as the default authorization provider, are not affected by this flaw. The multi-role token authorization provider (MultiRolesTokenAuthorizationProvider), added in Apache Pulsar 2.8.1, resolves roles from the role claim of the token in the authentication data it is given. When a proxy authenticates to the broker with its own token, the original principal was therefore authorized with all roles in the proxy's token. If any of those roles is a superuser or tenant admin role, any user whose requests are forwarded by that proxy can perform operations that need those permissions without holding them. Custom authorization providers that use the authentication data could be affected in a similar way.

Second, independently of the authorization provider, the tenant admin check of a proxied admin REST API request succeeded without checking the original principal when the proxy role was itself an admin role of the tenant. In deployments where a proxy role is a tenant admin, including with the default authorization provider, any user whose requests are forwarded by that proxy could perform tenant administration operations on that tenant. This behavior is present from 2.8.4 in the 2.8.x releases, from 2.9.3 in the 2.9.x releases, and from 2.10.1 onwards.

Deployments that use neither the multi-role token authorization provider nor a custom provider that uses the authentication data are not affected by the first flaw, and with the multi-role token authorization provider, neither are deployments whose proxies do not authenticate to the broker with a token. Deployments in which no proxy role is listed as an admin role of a tenant are not affected by the second flaw. A proxy role that is a superuser but is not listed as a tenant admin does not trigger it, because the tenant admin check of the built-in authorization providers only considers the tenant's admin roles; this can differ for custom authorization providers that treat superusers as tenant admins.

In fixed versions, both the proxy role and the original principal are authorized for each proxied request, and the original principal is authorized only with its own authentication data. With the multi-role token authorization provider, the roles of a forwarded token are used for the original principal only when that token authenticates as the original principal; otherwise only the original principal's role name is used. For tenant admin checks, the proxy role and the original principal must each be a superuser or a tenant admin of the tenant.

This issue affects Apache Pulsar versions from 2.8.1 before 4.0.14 and from 4.1.0 before 4.2.5.

- 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

The Pulsar Packages Management Service can be configured to store packages on the local filesystem of the broker by using the filesystem storage provider. Package names consist of a type, tenant, namespace, name and version. Authorization of package operations is based only on the tenant and namespace, while the storage location of a package is derived from all of these components. The version component of a package name was not validated, so it could contain URL-encoded path separators and parent directory references. The filesystem storage provider resolved such a version to a location belonging to a package in a different tenant or namespace. Because that location is inside the configured storage directory, the containment check that the filesystem storage provider performs in recent releases did not prevent the access.

An authenticated user who has the packages permission on any namespace could use this to download, overwrite or delete packages stored in other tenants or namespaces for which the user has no permission. Packages overwritten or deleted in this way may be used by Pulsar Functions, Sources or Sinks, so the issue can affect the integrity and availability of these components. If authentication is disabled, the operations are available to any client that can reach the broker's admin REST API.

This issue only affects deployments in which package management is enabled with the broker setting enablePackagesManagement and the filesystem storage provider (FileSystemPackagesStorageProvider) is configured with the setting packagesManagementStorageProvider. Package management is disabled by default, and the default storage provider, which stores packages in Apache BookKeeper, is not affected.

This issue affects Apache Pulsar versions from 2.10.0 before 4.0.14 and from 4.1.0 before 4.2.5.

- 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

Improper Authentication vulnerability in Apache Pulsar WebSocket Proxy allows an attacker to connect to the /pingpong endpoint without authentication.

This issue affects Apache Pulsar WebSocket Proxy: from 2.8.0 through 2.8., from 2.9.0 through 2.9., from 2.10.0 through 2.10.4, from 2.11.0 through 2.11.1, 3.0.0.

The known risks include a denial of service due to the WebSocket Proxy accepting any connections, and excessive data transfer due to misuse of the WebSocket ping/pong feature.

2.10 Pulsar WebSocket Proxy users should upgrade to at least 2.10.5. 2.11 Pulsar WebSocket Proxy users should upgrade to at least 2.11.2. 3.0 Pulsar WebSocket Proxy users should upgrade to at least 3.0.1. 3.1 Pulsar WebSocket Proxy users are unaffected. Any users running the Pulsar WebSocket Proxy for 2.8, 2.9, and earlier should upgrade to one of the above patched versions.

Observable timing discrepancy vulnerability in Apache Pulsar SASL Authentication Provider can allow an attacker to forge a SASL Role Token that will pass signature verification. Users are recommended to upgrade to version 2.11.3, 3.0.2, or 3.1.1 which fixes the issue. Users should also consider updating the configured secret in the saslJaasServerRoleTokenSignerSecretPath file.

Any component matching an above version running the SASL Authentication Provider is affected. That includes the Pulsar Broker, Proxy, Websocket Proxy, or Function Worker.

2.11 Pulsar users should upgrade to at least 2.11.3. 3.0 Pulsar users should upgrade to at least 3.0.2. 3.1 Pulsar users should upgrade to at least 3.1.1. Any users running Pulsar 2.8, 2.9, 2.10, and earlier should upgrade to one of the above patched versions.

For additional details on this attack vector, please refer to https://codahale.com/a-lesson-in-timing-attacks/ .

The Apache Pulsar broker admin REST API provides a truncate operation for persistent topics (DELETE /admin/v2/persistent/{tenant}/{namespace}/{topic}/truncate). Truncating a topic moves all subscription cursors of the topic to the end of the topic and deletes the topic's inactive ledgers. Truncating a non-partitioned topic, or a single partition addressed by its partition name, correctly requires the tenant admin role or the superuser role. When the operation is requested for the name of a partitioned topic, the broker does not apply this tenant admin check to the caller. Instead, it truncates each partition using the broker's own internal admin client, which authenticates with the broker's configured client credentials rather than the caller's identity. Each per-partition truncate request is still checked for the tenant admin role or the superuser role, but against the broker's internal identity instead of the caller. The partitions are therefore truncated only when the broker's configured client role is a superuser or an admin of the target tenant, which is the usual configuration when authorization is enabled.

As a result, when that condition holds, an authenticated user who is not a tenant admin can truncate any partitioned topic on which the user has lookup permission. Caller authentication and lookup permission alone are not sufficient: if the broker's internal identity lacks tenant admin or superuser authorization for the target tenant, the per-partition requests are rejected. With the default authorization provider, lookup permission is granted by produce or consume permission on the topic or its namespace. A user with no permissions on the topic cannot trigger the issue. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be different.

Truncating a partitioned topic this way moves the cursors of all subscriptions on every partition to the end of the topic, so any unacknowledged backlog is skipped and is no longer delivered to consumers. It also deletes eligible older ledgers of each partition regardless of the namespace's configured retention policy, so messages stored in those ledgers can be permanently lost. The ledger currently being written is not deleted by the truncate operation. The issue does not allow reading message contents or changing permissions or configuration, and it does not give access to topics on which the user has no lookup permission.

This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14 and from 4.1.0 before 4.2.5.

- 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

Users who cannot upgrade immediately can reduce exposure by restricting network access to the broker's admin REST API (/admin/v2) to trusted administrative clients.

Improper Authentication vulnerability in Apache Software Foundation Apache Pulsar Broker allows a client to stay connected to a broker after authentication data expires if the client connected through the Pulsar Proxy when the broker is configured with authenticateOriginalAuthData=false or if a client connects directly to a broker with a specially crafted connect command when the broker is configured with authenticateOriginalAuthData=false.

This issue affects Apache Pulsar: through 2.9.4, from 2.10.0 through 2.10.3, 2.11.0.

2.9 Pulsar Broker users should upgrade to at least 2.9.5. 2.10 Pulsar Broker users should upgrade to at least 2.10.4. 2.11 Pulsar Broker users should upgrade to at least 2.11.1. 3.0 Pulsar Broker users are unaffected. Any users running the Pulsar Broker for 2.8. and earlier should upgrade to one of the above patched versions.

In Apache Pulsar it is possible to access data from BookKeeper that does not belong to the topics accessible by the authenticated user. The Admin API get-message-by-id requires the user to input a topic and a ledger id. The ledger id is a pointer to the data, and it is supposed to be a valid it for the topic. Authorisation controls are performed against the topic name and there is not proper validation the that ledger id is valid in the context of such ledger. So it may happen that the user is able to read from a ledger that contains data owned by another tenant. This issue affects Apache Pulsar Apache Pulsar version 2.8.0 and prior versions; Apache Pulsar version 2.7.3 and prior versions; Apache Pulsar version 2.6.4 and prior versions.

Improper Input Validation vulnerability in Proxy component of Apache Pulsar allows an attacker to make TCP/IP connection attempts that originate from the Pulsar Proxy's IP address. When the Apache Pulsar Proxy component is used, it is possible to attempt to open TCP/IP connections to any IP address and port that the Pulsar Proxy can connect to. An attacker could use this as a way for DoS attacks that originate from the Pulsar Proxy's IP address. It hasn’t been detected that the Pulsar Proxy authentication can be bypassed. The attacker will have to have a valid token to a properly secured Pulsar Proxy. This issue affects Apache Pulsar Proxy versions 2.7.0 to 2.7.4; 2.8.0 to 2.8.2; 2.9.0 to 2.9.1; 2.6.4 and earlier.

The vulnerability allows authenticated users with only produce or consume permissions to modify topic-level policies, such as retention, TTL, and offloading settings. These management operations should be restricted to users with the tenant admin role or super user role.

This issue affects Apache Pulsar versions from 2.7.1 to 2.10.5, from 2.11.0 to 2.11.3, from 3.0.0 to 3.0.2, from 3.1.0 to 3.1.2, and 3.2.0.

2.10 Apache Pulsar users should upgrade to at least 2.10.6. 2.11 Apache Pulsar users should upgrade to at least 2.11.4. 3.0 Apache Pulsar users should upgrade to at least 3.0.3. 3.1 Apache Pulsar users should upgrade to at least 3.1.3. 3.2 Apache Pulsar users should upgrade to at least 3.2.1.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

This vulnerability allows authenticated users with produce or consume permissions to perform unauthorized operations on partitioned topics, such as unloading topics and triggering compaction. These management operations should be restricted to users with the tenant admin role or superuser role. An authenticated user with produce permission can create subscriptions and update subscription properties on partitioned topics, even though this should be limited to users with consume permissions. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different. Additionally, the vulnerability allows an authenticated user to read, create, modify, and delete namespace properties in any namespace in any tenant. In Pulsar, namespace properties are reserved for user provided metadata about the namespace.

This issue affects Apache Pulsar versions from 2.7.1 to 2.10.6, from 2.11.0 to 2.11.4, from 3.0.0 to 3.0.3, from 3.1.0 to 3.1.3, and from 3.2.0 to 3.2.1.

3.0 Apache Pulsar users should upgrade to at least 3.0.4. 3.1 and 3.2 Apache Pulsar users should upgrade to at least 3.2.2.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

When package management is enabled, Pulsar Functions, Sources and Sinks can be registered or updated from a package stored in the Pulsar Packages Management Service by supplying a package URL. The Pulsar Functions worker authorized these requests only against the namespace in which the component was being registered or updated. It did not check whether the requesting user was permitted to access packages in the namespace that the package URL refers to, and it retrieved the package from the broker using the worker's own credentials. The permission check of the Packages Management Service was therefore applied to the worker's identity instead of the requesting user's. Package URLs of transform functions supplied when registering or updating a sink were handled in the same way.

An authenticated user who is permitted to register or update functions, sources or sinks in any namespace of their own tenant could use this to obtain the contents of a package stored in a namespace of another tenant, without having the packages permission on that namespace. The impact is limited to disclosure of package contents, which may include application code, business logic or embedded credentials. The issue does not allow packages to be modified or deleted and does not affect availability.

This issue only affects deployments that have authentication and authorization enabled and in which package management has been enabled: the broker setting enablePackagesManagement and, in current releases, the functions worker setting functionsWorkerEnablePackageManagement. Both settings are disabled by default.

This issue affects Apache Pulsar versions from 2.8.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5.

- 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

A flaw was found in the Apache Pulsar Java Client. This flaw allows an attacker to use a Man-in-the-Middle (MITM) attack, manipulating network traffic and gaining the client's authentication data.

TLS hostname verification cannot be enabled in the Pulsar Broker's Java Client, the Pulsar Broker's Java Admin Client, the Pulsar WebSocket Proxy's Java Client, and the Pulsar Proxy's Admin Client leaving intra-cluster connections and geo-replication connections vulnerable to man in the middle attacks, which could leak credentials, configuration data, message data, and any other data sent by these clients. The vulnerability is for both the pulsar+ssl protocol and HTTPS. An attacker can only take advantage of this vulnerability by taking control of a machine 'between' the client and the server. The attacker must then actively manipulate traffic to perform the attack by providing the client with a cryptographically valid certificate for an unrelated host. This issue affects Apache Pulsar Broker, Proxy, and WebSocket Proxy versions 2.7.0 to 2.7.4; 2.8.0 to 2.8.3; 2.9.0 to 2.9.2; 2.10.0; 2.6.4 and earlier.

Apache Pulsar Brokers and Proxies create an internal Pulsar Admin Client that does not verify peer TLS certificates, even when tlsAllowInsecureConnection is disabled via configuration. The Pulsar Admin Client's intra-cluster and geo-replication HTTPS connections are vulnerable to man in the middle attacks, which could leak authentication data, configuration data, and any other data sent by these clients. An attacker can only take advantage of this vulnerability by taking control of a machine 'between' the client and the server. The attacker must then actively manipulate traffic to perform the attack. This issue affects Apache Pulsar Broker and Proxy versions 2.7.0 to 2.7.4; 2.8.0 to 2.8.3; 2.9.0 to 2.9.2; 2.10.0; 2.6.4 and earlier.

The Pulsar broker serves two schema commands on its binary protocol: GetSchema, which returns the schema registered for a topic, and GetOrCreateSchema, which registers a new schema version for an existing topic. The broker handled both commands after checking only that the client connection was authenticated. Unlike the broker's other topic commands, such as those for creating producers and consumers or for looking up topics, these two commands did not check whether the authenticated client was authorized for the target topic. The Pulsar REST API endpoints for schemas were not affected.

An authenticated client without any permission on the target topic, namespace or tenant could use these commands to:

- read the schema registered for a topic in another namespace or tenant, disclosing the schema definition such as record field names and types. Message payloads are not disclosed. - register a new schema version on an existing topic in another namespace or tenant. The topic's schema compatibility and schema auto-update policies still apply. The issue does not allow message data to be read or modified, but a registered schema version can cause legitimate producers and consumers of that topic to fail with schema incompatibility errors until the schema is corrected by an administrator.

The standard Pulsar client performs an authorized topic lookup before it sends these commands, so the missing check could not be observed when testing with the standard client. A client that implements the binary protocol directly is not required to perform that lookup first.

This issue is relevant only to deployments that have authentication and authorization enabled. The GetSchema command is affected from Apache Pulsar 2.2.0, and the GetOrCreateSchema command from Apache Pulsar 2.5.0. After the fix, the broker requires the lookup permission on the topic for GetSchema and the produce permission on the topic for GetOrCreateSchema. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different.

This issue affects Apache Pulsar versions from 2.2.0 before 4.0.14, from 4.1.0 through 4.1.3, and from 4.2.0 before 4.2.5.

- 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

The Pulsar Functions worker REST API provides two endpoints that return the catalog of Pulsar IO connectors installed on the functions worker: the worker connectors endpoint (/admin/v2/worker/connectors) and the deprecated functions connectors endpoint (/admin/v2/functions/connectors and /admin/v3/functions/connectors). When authorization is enabled, the worker connectors endpoint requires super-user access. The functions connectors endpoint, served both by the functions worker and by a broker running the functions worker, returns the same catalog without this check.

As a result, when authentication and authorization are enabled, any authenticated client can read the connector catalog through the functions connectors endpoint, regardless of the permissions granted to its role and without super-user access. Unauthenticated requests are rejected unless anonymous access is configured with an anonymous user role.

The catalog contains the connector type definitions installed in the functions worker's connectors directory: the connector name, its description, and the source, sink and configuration class names. It does not contain configured source or sink instances, their configuration values or credentials, and an installed connector type does not indicate that a connector is configured or running. The impact is limited to disclosure of this metadata, which can include the names and descriptions of custom connectors installed by the operator. The issue does not allow modifying the catalog or managing connectors. Connector definitions that have a source or sink class are also returned by the built-in sources and sinks endpoints to authenticated clients.

In fixed versions, the functions connectors endpoint applies the same checks as the worker connectors endpoint, so that it requires super-user access when authorization is enabled. Clients that are not super-users can use the built-in sources and sinks endpoints to list the available connector types.

This issue affects Apache Pulsar versions from 2.4.1 before 4.0.14 and from 4.1.0 before 4.2.5.

- 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

The Pulsar Functions Worker provides a REST API endpoint for triggering a function, which publishes a caller-supplied value to one of the function's configured input topics. The Functions Worker performs this publish with its own broker client, which authenticates with the Worker's configured broker-client credentials rather than the credentials of the API caller.

When authorization is enabled, in Apache Pulsar 2.4.0 and later versions, the trigger endpoint checks only that the caller is authorized to perform function operations in the function's namespace. It does not check that the caller is authorized to produce to the input topic that the message is published to. Versions before 2.4.0 do not perform a caller authorization check for the trigger endpoint at all. Function input topics are not restricted to the function's own tenant or namespace, and registering a function does not require produce permission on its input topics.

As a result, an authenticated user who is authorized to manage functions in a namespace, for example a role granted the functions permission on that namespace, can cause the Functions Worker to publish messages with caller-controlled content to a topic that the user is not authorized to produce to, including topics in other tenants. These messages are published under the identity of the Functions Worker. The issue does not require any function instance to be running or any function code to be executed. It requires that the Functions Worker's broker-client identity is itself authorized to produce to the target topic and, in Apache Pulsar 2.3.0 and later versions, to list the subscriptions of the target topic, as is the case when that identity is a superuser. The impact is on the integrity of the data in the affected topics: consumers of those topics may receive messages from a user who is not permitted to publish them. This concerns the Functions Worker REST API as called by an external, authenticated client; it does not change the security model for function code, which must be fully trusted.

In fixed versions, when authorization is enabled, triggering a function additionally requires the caller to be authorized to produce to the selected input topic before any message is published.

This issue affects Apache Pulsar versions from 2.0.0-rc1-incubating before 4.0.14 and from 4.1.0 before 4.2.5.

- 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

Users of Apache Pulsar 2.4.0 and later versions with authorization enabled who cannot upgrade immediately can limit the permission to manage functions to trusted roles. Users of versions before 2.4.0 should restrict access to the Functions Worker REST API to trusted callers, because in these versions the trigger endpoint does not check the caller's permission to manage functions.

The Apache Pulsar WebSocket service allows a WebSocket consumer to configure a dead letter policy through query parameters of the consumer endpoint, including the deadLetterTopic parameter that names the topic to which messages are written after the maximum number of redeliveries is exceeded. When authorization is enabled, the WebSocket service checks only that the connecting user holds the CONSUME permission on the subscribed topic. It does not check whether the user holds the PRODUCE permission on the topic named in deadLetterTopic. The dead letter messages are then written by the WebSocket service using its own broker client identity rather than the identity of the connecting user.

As a result, an authenticated user who holds the CONSUME permission on at least one topic can cause messages to be written to a topic of their choosing in any existing namespace, including namespaces belonging to other tenants, provided the role used by the WebSocket service to connect to the brokers is authorized to produce to that topic and the topic accepts a producer that registers no schema. The dead letter producer created by the WebSocket service registers no schema, so it is rejected when the target topic has a schema and schema validation is enforced for that topic or its namespace; this setting is not enabled by default. The same user is refused when attempting to produce to that topic directly. Where automatic topic creation is enabled, which is the default, the named topic is created if it does not already exist. The issue can only be triggered when the WebSocket service is enabled, either in the broker (webSocketServiceEnabled, which is disabled by default) or as a standalone WebSocket proxy.

The impact is unauthorized injection of messages into topics the user is not permitted to produce to. The user can determine the content of the injected messages when they also control the messages on the subscribed topic. The issue does not allow reading, modifying or deleting existing messages in the target topic. Injected messages carry the dead letter message properties and a dead letter producer name, so they can be distinguished from messages produced normally; however, the values of these properties are not authenticated and should not be relied upon to establish the origin of a message. Whether an injected message has further consequences depends on how the applications consuming the target topic process it. Repeated injection also consumes storage and backlog capacity in the target namespace.

This issue affects Apache Pulsar versions from 2.3.0 before 4.0.14 and from 4.1.0 before 4.2.5.

- 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

Users who cannot upgrade immediately and do not require the WebSocket service should disable it. Where the WebSocket service is required, restricting network access to it and limiting the permissions granted to the role the WebSocket service uses to connect to the brokers to the namespaces WebSocket clients are intended to access reduces the exposure.

The Apache Pulsar broker admin REST API provides endpoints to read, set and remove the topic-level entry filter policy of a topic. For persistent topics these endpoints check that the caller is authorized for the entry filters topic policy operation. The corresponding endpoints for non-persistent topics (/admin/v2/non-persistent/{tenant}/{namespace}/{topic}/entryFilters) do not perform this authorization check. The only authorization check these endpoints perform is an indirect lookup permission check, made while the topic's partition metadata is retrieved; it is present in all affected versions.

As a result, when authentication and authorization are enabled, an authenticated user who has been granted produce or consume permission on a non-persistent topic, or on its namespace, but not permission to manage the topic's policies can read, replace or remove the topic-level entry filter policy of that topic. These operations should be restricted to users with the tenant admin role or the superuser role. This impact analysis assumes that Pulsar has been configured with the default authorization provider. For custom authorization providers, the impact could be slightly different.

The practical impact is limited by two broker configuration requirements, neither of which is met by default:

- Entry filters must have been installed by the operator. Entry filter implementations are loaded only at broker startup from the broker's entry filters directory, which is empty by default. A request can only select among entry filters the operator has already deployed; setting any other filter name is rejected. The issue does not allow a caller to install or load entry filter code or to run arbitrary code in the broker. - Topic-level entry filter policies must be allowed to override the broker-level configuration (allowOverrideEntryFilters, which is disabled by default). When this setting is disabled, the topic-level entry filter policy has no effect on message dispatch.

In deployments where both conditions are met, an unauthorized user can remove the topic-level entry filter policy of a non-persistent topic, for example one used to restrict which messages are delivered to consumers, or apply a different installed entry filter that withholds messages from subscriptions of that topic. Removing it makes the topic fall back to the namespace-level or broker-level entry filters, which are not removed. A changed policy affects only subscription dispatchers created after the change, for example for new subscriptions or when a subscription is re-created after all of its consumers have disconnected; dispatchers that already exist keep the entry filters they were created with. Because non-persistent topics do not store messages, messages withheld by an entry filter are not delivered. Reading the policy discloses only the names of the configured entry filters. The issue does not allow reading message contents, and entry filters cannot modify message payloads. Persistent topics and namespace-level entry filter policies are not affected. Apache Pulsar versions before 3.3.0 are not affected, because in those versions the entry filters topic policy check is made in code shared by the persistent and non-persistent endpoints.

This issue affects Apache Pulsar versions from 3.3.0 before 4.0.14 and from 4.1.0 before 4.2.5.

- 3.3.x and 4.0.x version users should upgrade to at least 4.0.14. - 4.1.x and 4.2.x version users should upgrade to at least 4.2.5.

Users operating versions prior to those listed above should upgrade to the aforementioned patched versions or newer versions.

The currently supported Apache Pulsar release lines are 4.0.x and 5.0.x. The supported versions schedule is available at https://pulsar.apache.org/contribute/release-policy/.

Users who cannot upgrade immediately and have deployed entry filters should keep allowOverrideEntryFilters at its default value of false, so that topic-level entry filter policies do not affect message dispatch.