Unspecified vulnerability in Cisco Adaptive Security Appliance (ASA) and PIX 7.2 before 7.2(2)8, when using Layer 2 Tunneling Protocol (L2TP) or Remote Management Access, allows remote attackers to bypass LDAP authentication and gain privileges via unknown vectors.
Buffer overflow in the IKEv1 and IKEv2 implementations in Cisco ASA Software before 8.4(7.30), 8.7 before 8.7(1.18), 9.0 before 9.0(4.38), 9.1 before 9.1(7), 9.2 before 9.2(4.5), 9.3 before 9.3(3.7), 9.4 before 9.4(2.4), and 9.5 before 9.5(2.2) on ASA 5500 devices, ASA 5500-X devices, ASA Services Module for Cisco Catalyst 6500 and Cisco 7600 devices, ASA 1000V devices, Adaptive Security Virtual Appliance (aka ASAv), Firepower 9300 ASA Security Module, and ISA 3000 devices allows remote attackers to execute arbitrary code or cause a denial of service (device reload) via crafted UDP packets, aka Bug IDs CSCux29978 and CSCux42019.
Buffer overflow in the Cisco Port Forwarder ActiveX control in cscopf.ocx, as distributed through the Clientless VPN feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.0 through 7.2 before 7.2(5.6), 8.0 before 8.0(5.26), 8.1 before 8.1(2.53), 8.2 before 8.2(5.18), 8.3 before 8.3(2.28), 8.2 before 8.4(2.16), and 8.6 before 8.6(1.1), allows remote attackers to execute arbitrary code via unspecified vectors, aka Bug ID CSCtr00165.
A vulnerability in the remote access VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a brute force attack in an attempt to identify valid username and password combinations or an authenticated, remote attacker to establish a clientless SSL VPN session with an unauthorized user. This vulnerability is due to improper separation of authentication, authorization, and accounting (AAA) between the remote access VPN feature and the HTTPS management and site-to-site VPN features. An attacker could exploit this vulnerability by specifying a default connection profile/tunnel group while conducting a brute force attack or while establishing a clientless SSL VPN session using valid credentials. A successful exploit could allow the attacker to achieve one or both of the following: Identify valid credentials that could then be used to establish an unauthorized remote access VPN session. Establish a clientless SSL VPN session (only when running Cisco ASA Software Release 9.16 or earlier). Notes: Establishing a client-based remote access VPN tunnel is not possible as these default connection profiles/tunnel groups do not and cannot have an IP address pool configured. This vulnerability does not allow an attacker to bypass authentication. To successfully establish a remote access VPN session, valid credentials are required, including a valid second factor if multi-factor authentication (MFA) is configured. Cisco will release software updates that address this vulnerability. There are workarounds that address this vulnerability.
The WebVPN implementation on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) permits the viewing of CIFS shares even when CIFS file browsing has been disabled, which allows remote authenticated users to bypass intended access restrictions via CIFS requests, aka Bug ID CSCsz80777.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) do not properly determine the interfaces for which TELNET connections should be permitted, which allows remote authenticated users to bypass intended access restrictions via vectors involving the "lowest security level interface," aka Bug ID CSCsv40504.
A buffer overflow vulnerability in the Simple Network Management Protocol (SNMP) code of Cisco ASA software could allow an attacker to cause a reload of the affected system or to remotely execute code.
A vulnerability in Common Internet Filesystem (CIFS) code in the Clientless SSL VPN functionality of Cisco ASA Software, Major Releases 9.0-9.6, could allow an authenticated, remote attacker to cause a heap overflow. The vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by sending a crafted URL to the affected system. An exploit could allow the remote attacker to cause a reload of the affected system or potentially execute code. Note: Only traffic directed to the affected system can be used to exploit this vulnerability. This vulnerability affects systems configured in routed firewall mode only and in single or multiple context mode. This vulnerability can be triggered by IPv4 or IPv6 traffic. A valid TCP connection is needed to perform the attack. The attacker needs to have valid credentials to log in to the Clientless SSL VPN portal. Vulnerable Cisco ASA Software running on the following products may be affected by this vulnerability: Cisco ASA 5500 Series Adaptive Security Appliances, Cisco ASA 5500-X Series Next-Generation Firewalls, Cisco Adaptive Security Virtual Appliance (ASAv), Cisco ASA for Firepower 9300 Series, Cisco ASA for Firepower 4100 Series. Cisco Bug IDs: CSCvc23838.
Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.3), 8.0 before 8.0(5.24), 8.1 before 8.1(2.50), 8.2 before 8.2(5), 8.3 before 8.3(2.18), 8.4 before 8.4(1.10), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to bypass authentication via a crafted TACACS+ reply, aka Bug IDs CSCto40365 and CSCto74274.
A vulnerability in the command-line interface (CLI) parser of Cisco ASA software could allow an authenticated, local attacker to create a denial-of-service (DoS) condition or potentially execute code.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.0 before 7.0(8.11), 7.1 and 7.2 before 7.2(5.1), 8.0 before 8.0(5.19), 8.1 before 8.1(2.47), 8.2 before 8.2(2.19), and 8.3 before 8.3(1.8); Cisco PIX Security Appliances 500 series devices; and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(20), 3.2 before 3.2(20), 4.0 before 4.0(15), and 4.1 before 4.1(5) allow remote attackers to cause a denial of service (device reload) via a malformed Skinny Client Control Protocol (SCCP) message, aka Bug IDs CSCtg69457 and CSCtl84952.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.0 before 7.0(8.12), 7.1 and 7.2 before 7.2(5.2), 8.0 before 8.0(5.21), 8.1 before 8.1(2.49), 8.2 before 8.2(3.6), and 8.3 before 8.3(2.7) and Cisco PIX Security Appliances 500 series devices, when transparent firewall mode is configured but IPv6 is not configured, allow remote attackers to cause a denial of service (packet buffer exhaustion and device outage) via IPv6 traffic, aka Bug ID CSCtj04707.
Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 before 8.1(2.50), 8.2 before 8.2(5.6), 8.3 before 8.3(2.23), 8.4 before 8.4(2.7), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via malformed ILS traffic, aka Bug IDs CSCtq57697 and CSCtq57802.
Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 and 8.2 before 8.2(5.11), 8.3 before 8.3(2.23), 8.4 before 8.4(2.6), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via crafted SunRPC traffic, aka Bug IDs CSCtq06065 and CSCtq09978.
Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 and 8.2 before 8.2(5.11), 8.3 before 8.3(2.23), 8.4 before 8.4(2.6), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via crafted SunRPC traffic, aka Bug IDs CSCto92398 and CSCtq09989.
Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.2 before 7.2(5.3), 8.0 before 8.0(5.25), 8.1 before 8.1(2.50), 8.2 before 8.2(5.11), 8.3 before 8.3(2.23), 8.4 before 8.4(2), and 8.5 before 8.5(1.1) allow remote attackers to cause a denial of service (device reload) via crafted MSN Instant Messenger traffic, aka Bug ID CSCtl67486.
Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 and 8.2 before 8.2(5.11), 8.3 before 8.3(2.23), 8.4 before 8.4(2.6), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via crafted SunRPC traffic, aka Bug IDs CSCtq06062 and CSCtq09986.
Cisco Adaptive Security Appliances (ASA) 5500 series devices, and the ASA Services module in Cisco Catalyst 6500 series devices, with software 7.0 before 7.0(8.13), 7.1 and 7.2 before 7.2(5.4), 8.0 before 8.0(5.25), 8.1 and 8.2 before 8.2(5.11), 8.3 before 8.3(2.23), 8.4 before 8.4(2.6), and 8.5 before 8.5(1.1) and Cisco Firewall Services Module (aka FWSM) 3.1 before 3.1(21), 3.2 before 3.2(22), 4.0 before 4.0(16), and 4.1 before 4.1(7) allow remote attackers to cause a denial of service (device reload) via crafted SunRPC traffic, aka Bug IDs CSCto92380 and CSCtq09972.
The DHCP relay agent in Cisco Adaptive Security Appliance (ASA) and PIX 7.2 allows remote attackers to cause a denial of service (dropped packets) via a DHCPREQUEST or DHCPINFORM message that causes multiple DHCPACK messages to be sent from DHCP servers to the agent, which consumes the memory allocated for a local buffer. NOTE: this issue only occurs when multiple DHCP servers are used.
Unspecified vulnerability in Cisco Adaptive Security Appliance (ASA) and PIX 7.1 before 7.1(2)49 and 7.2 before 7.2(2)17 allows remote attackers to cause a denial of service (device reload) via unknown vectors related to VPN connection termination and password expiry.
Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) allows remote attackers to cause a denial of service (device crash) via a large number of LAN-to-LAN (aka L2L) IPsec sessions, aka Bug ID CSCth36592.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(4) and earlier allow remote attackers to cause a denial of service via a flood of packets, aka Bug ID CSCtg06316.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) do not properly preserve ACL behavior after a migration, which allows remote attackers to bypass intended access restrictions via an unspecified type of network traffic that had previously been denied, aka Bug ID CSCte46460.
Memory leak on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote attackers to cause a denial of service (memory consumption) by making multiple incorrect LDAP authentication attempts, aka Bug ID CSCtf29867.
Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(4) and earlier allows remote attackers to cause a denial of service (block exhaustion) via multicast traffic, aka Bug ID CSCtg63992.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) do not properly handle Online Certificate Status Protocol (OCSP) connection failures, which allows remote OCSP responders to cause a denial of service (TCP socket exhaustion) by rejecting connection attempts, aka Bug ID CSCsz36816.
Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) allows remote attackers to cause a denial of service (device crash) via multicast traffic, aka Bug IDs CSCtg61810 and CSCtg69742.
Unspecified vulnerability in the SIP inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) allows remote attackers to cause a denial of service (device crash) by making many SIP calls, aka Bug ID CSCte20030.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(3) and earlier allow remote attackers to cause a denial of service (block exhaustion) via EIGRP traffic that triggers an EIGRP multicast storm, aka Bug ID CSCtf20269.
The Neighbor Discovery (ND) protocol implementation in the IPv6 stack on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(3) and earlier, and Cisco PIX Security Appliances devices, allows remote attackers to cause a denial of service (CPU consumption and device hang) by sending many Router Advertisement (RA) messages with different source addresses, as demonstrated by the floodrouter6 program in the thc-ipv6 package, aka Bug ID CSCti24526.