A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To exploit this vulnerability, the attacker must have the OSPF secret key. This vulnerability is due to insufficient input validation when processing OSPF link-state update (LSU) packets. An attacker could exploit this vulnerability by sending crafted OSPF LSU packets. A successful exploit could allow the attacker to corrupt the heap, causing the device to reload, resulting in a DoS condition.

A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an authenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. To exploit this vulnerability, the attacker must have the OSPF secret key. This vulnerability is due to heap corruption in OSPF when parsing packets. An attacker could exploit this vulnerability by sending crafted packets to the OSPF service. A successful exploit could allow the attacker to corrupt the heap, causing the affected device to reload, resulting in a DoS condition.

A vulnerability in the OSPF protocol of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to corrupt memory on an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to memory corruption when parsing OSPF protocol packets. An attacker could exploit this vulnerability by sending crafted OSPF packets to an affected device. A successful exploit could allow the attacker to cause memory corruption causing the affected device to reboot, resulting in a DoS condition.

A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition when OSPF canonicalization debug is enabled by using the command debug ip ospf canon. This vulnerability is due to insufficient input validation when processing OSPF LSU packets. An attacker could exploit this vulnerability by sending crafted unauthenticated OSPF packets. A successful exploit could allow the attacker to write to memory outside of the packet data, causing the device to reload, resulting in a DoS condition.

A vulnerability in the OSPF protocol of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, adjacent attacker to exhaust memory on an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improperly validating input by the OSPF protocol when parsing packets. An attacker could exploit this vulnerability by by sending crafted OSPF packets to an affected device. A successful exploit could allow the attacker to exhaust memory on the affected device, resulting in a DoS condition.

A vulnerability in the OSPF protocol of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload unexpectedly, resulting in a DoS condition. If OSPF authentication is enabled, the attacker must know the secret key to exploit this vulnerability. This vulnerability is due to insufficient input validation when processing OSPF update packets. An attacker could exploit this vulnerability by sending crafted OSPF update packets. A successful exploit could allow the attacker to create a buffer overflow, causing the affected device to reload, resulting in a DoS condition.

A vulnerability in the Cisco FXOS Software CLI feature for Cisco Secure Firewall ASA Software and Secure FTD Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system with root-level privileges. To exploit this vulnerability, the attacker must have valid administrative credentials on an affected device. This vulnerability is due to insufficient input validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input for specific CLI commands. A successful exploit could allow the attacker to execute commands on the underlying operating system with root-level privileges.

A vulnerability in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should be denied through an affected device. This vulnerability is due to improper error handling when an affected device that is joining a cluster runs out of memory while replicating access control rules. An attacker could exploit this vulnerability by sending traffic that should be blocked through the device. A successful exploit could allow the attacker to bypass access controls and reach devices in protected networks.

A vulnerability in the VPN web services component of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a browser that is accessing an affected device.  This vulnerability is due to improper validation of user-supplied input in HTTP requests. An attacker could exploit this vulnerability by persuading a user to follow a link to a malicious website that is designed to submit malicious input to the affected application. A successful exploit could allow the attacker to execute arbitrary HTML or script code in the browser in the context of the VPN web server.

A vulnerability in the VPN web services component of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct browser-based attacks against users of an affected device. This vulnerability is due to improper validation of HTTP requests. An attacker could exploit this vulnerability by persuading a user to visit a website that is designed to pass malicious HTTP requests to a device that is running Cisco Secure Firewall ASA Software or Cisco Secure FTD Software and has web services endpoints supporting VPN features enabled. A successful exploit could allow the attacker to reflect malicious input from the affected device to the browser that is in use and conduct browser-based attacks, including cross-site scripting (XSS) attacks. The attacker is not able to directly impact the affected device.

A vulnerability in the IKEv2 feature of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device that may impact the availability of services to devices elsewhere in the network. This vulnerability is due to a memory leak when parsing IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to exhaust resources, causing a DoS condition that will eventually require the device to be manually reloaded.

A vulnerability in the IKEv2 feature of Cisco Secure Firewall ASA Software and Cisco Secure FTD Software could allow an unauthenticated, remote attacker to cause a DoS condition on an affected device that may also impact the availability of services to devices elsewhere in the network. This vulnerability is due to memory exhaustion caused by not freeing memory during IKEv2 packet processing. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit could allow the attacker to exhaust resources, causing a DoS condition that will eventually require the device to manually reload.

A vulnerability in the Remote Access SSL VPN, HTTP management and MUS functionality, of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust device memory resulting in a denial of service (DoS) condition requiring a manual reboot. This vulnerability is due to trusting user input without validation. An attacker could exploit this vulnerability by sending crafted packets to the Remote Access SSL VPN server. A successful exploit could allow the attacker to cause the device to stop responding, resulting in a DoS condition.

A vulnerability in a small subset of CLI commands that are used on Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to craft Lua code that could be used on the underlying operating system as root. This vulnerability exists because user-provided input is not properly sanitized. An attacker could exploit this vulnerability by crafting valid Lua code and submitting it as a malicious parameter for a CLI command. A successful exploit could allow the attacker to inject Lua code, which could lead to arbitrary code execution as the root user. To exploit this vulnerability, an attacker must have valid Administrator credentials.

A vulnerability in the implementation of the proprietary SSH stack with SSH key-based authentication in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to log in to a Cisco Secure Firewall ASA device and execute commands as a specific user. This vulnerability is due to insufficient validation of user input during the SSH authentication phase. An attacker could exploit this vulnerability by submitting crafted input during SSH authentication to an affected device. A successful exploit could allow the attacker to log in to the device as a specific user without the private SSH key of that user. To exploit this vulnerability, the attacker must possess a valid username and the associated public key. The private key is not required. Notes: Exploitation of this vulnerability does not provide the attacker with root access. The authentication, authorization, and accounting (AAA) configuration command auto-enable is not affected by this vulnerability.  

A vulnerability in the login authentication functionality of the Remote Access SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to deny further VPN user authentications for several minutes, resulting in a temporary denial of service (DoS) condition. This vulnerability is due to ineffective handling of memory resources during the authentication process. An attacker could exploit this vulnerability by sending crafted packets, which could cause resource exhaustion of the authentication process. A successful exploit could allow the attacker to deny authentication for Remote Access SSL VPN users for several minutes, resulting in a temporary DoS condition.

A vulnerability in the VPN web server of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary code with root-level privileges. Administrator-level privileges are required to exploit this vulnerability. This vulnerability is due to improper validation of a specific file when it is read from system flash memory. An attacker could exploit this vulnerability by restoring a crafted backup file to an affected device. A successful exploit could allow the attacker to execute arbitrary code on the affected device after the next reload of the device, which could alter system behavior. Because the injected code could persist across device reboots, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.

A vulnerability in the Remote Access VPN (RAVPN) service of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) of the RAVPN service. This vulnerability is due to resource exhaustion. An attacker could exploit this vulnerability by sending a large number of VPN authentication requests to an affected device. A successful exploit could allow the attacker to exhaust resources, resulting in a DoS of the RAVPN service on the affected device. Depending on the impact of the attack, a reload of the device may be required to restore the RAVPN service. Services that are not related to VPN are not affected. Cisco Talos discussed these attacks in the blog post Large-scale brute-force activity targeting VPNs, SSH services with commonly used login credentials.

A vulnerability in the Network Service Group (NSG) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should be denied to flow through an affected device. This vulnerability is due to a logic error that occurs when NSG ACLs are populated on an affected device. An attacker could exploit this vulnerability by establishing a connection to the affected device. A successful exploit could allow the attacker to bypass configured ACL rules.

A vulnerability in the VPN web client services feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a browser that is accessing an affected device. This vulnerability is due to improper validation of user-supplied input to application endpoints. An attacker could exploit this vulnerability by persuading a user to follow a link designed to submit malicious input to the affected application. A successful exploit could allow the attacker to execute arbitrary HTML or script code in the browser in the context of the web services page.

A vulnerability in the VPN web client services feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a browser that is accessing an affected device. This vulnerability is due to improper validation of user-supplied input to application endpoints. An attacker could exploit this vulnerability by persuading a user to follow a link designed to submit malicious input to the affected application. A successful exploit could allow the attacker to execute arbitrary HTML or script code in the browser in the context of the web services page.

A vulnerability in the session authentication functionality of the Remote Access SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to prevent users from authenticating. This vulnerability is due to insufficient entropy in the authentication process. An attacker could exploit this vulnerability by determining the handle of an authenticating user and using it to terminate their authentication session. A successful exploit could allow the attacker to force a user to restart the authentication process, preventing a legitimate user from establishing remote access VPN sessions.

A vulnerability in the AnyConnect firewall for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should have been denied to flow through an affected device. This vulnerability is due to a logic error in populating group ACLs when an AnyConnect client establishes a new session toward an affected device. An attacker could exploit this vulnerability by establishing an AnyConnect connection to the affected device. A successful exploit could allow the attacker to bypass configured ACL rules.

A vulnerability in the AnyConnect firewall for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access control list (ACL) and allow traffic that should have been denied to flow through an affected device. This vulnerability is due to a logic error in populating group ACLs when an AnyConnect client establishes a new session toward an affected device. An attacker could exploit this vulnerability by establishing an AnyConnect connection to the affected device. A successful exploit could allow the attacker to bypass configured ACL rules.

A vulnerability in the activation of an access control list (ACL) on Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the protection that is offered by a configured ACL on an affected device. This vulnerability is due to a logic error that occurs when an ACL changes from inactive to active in the running configuration of an affected device. An attacker could exploit this vulnerability by sending traffic through the affected device that should be denied by the configured ACL. The reverse condition is also true—traffic that should be permitted could be denied by the configured ACL. A successful exploit could allow the attacker to bypass configured ACL protections on the affected device, allowing the attacker to access trusted networks that the device might be protecting. Note: This vulnerability applies to both IPv4 and IPv6 traffic as well as dual-stack ACL configurations in which both IPv4 and IPv6 ACLs are configured on an interface.

A vulnerability in the implementation of SAML 2.0 single sign-on (SSO) for remote access VPN services in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to successfully establish a VPN session on an affected device. This vulnerability is due to improper separation of authorization domains when using SAML authentication. An attacker could exploit this vulnerability by using valid credentials to successfully authenticate using their designated connection profile (tunnel group), intercepting the SAML SSO token that is sent back from the Cisco ASA device, and then submitting the same SAML SSO token to a different tunnel group for authentication. A successful exploit could allow the attacker to establish a remote access VPN session using a connection profile that they are not authorized to use and connect to secured networks behind the affected device that they are not authorized to access. For successful exploitation, the attacker must have valid remote access VPN user credentials.

A vulnerability in the Cisco Adaptive Security Appliance (ASA) restore functionality that is available in Cisco ASA Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system with root-level privileges. Administrator-level privileges are required to exploit this vulnerability. This vulnerability exists because the contents of a backup file are improperly sanitized at restore time. An attacker could exploit this vulnerability by restoring a crafted backup file to an affected device. A successful exploit could allow the attacker to execute arbitrary commands on the underlying Linux operating system as root.

A vulnerability in a legacy capability that allowed for the preloading of VPN clients and plug-ins and that has been available in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary code with root-level privileges. Administrator-level privileges are required to exploit this vulnerability. This vulnerability is due to improper validation of a file when it is read from system flash memory. An attacker could exploit this vulnerability by copying a crafted file to the disk0: file system of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the affected device after the next reload of the device, which could alter system behavior. Because the injected code could persist across device reboots, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.

A vulnerability in the AnyConnect SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to send packets with another VPN user's source IP address. This vulnerability is due to improper validation of the packet's inner source IP address after decryption. An attacker could exploit this vulnerability by sending crafted packets through the tunnel. A successful exploit could allow the attacker to send a packet impersonating another VPN user's IP address. It is not possible for the attacker to receive return packets.

A vulnerability in the remote access SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to bypass a configured multiple certificate authentication policy and connect using only a valid username and password. This vulnerability is due to improper error handling during remote access VPN authentication. An attacker could exploit this vulnerability by sending crafted requests during remote access VPN session establishment. A successful exploit could allow the attacker to bypass the configured multiple certificate authentication policy while retaining the privileges and permissions associated with the original connection profile.