Unspecified vulnerability in Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to use the LOCAL authentication method, allows remote authenticated users to gain privileges via unspecified vectors.
The WebVPN implementation on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) permits the viewing of CIFS shares even when CIFS file browsing has been disabled, which allows remote authenticated users to bypass intended access restrictions via CIFS requests, aka Bug ID CSCsz80777.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) do not properly determine the interfaces for which TELNET connections should be permitted, which allows remote authenticated users to bypass intended access restrictions via vectors involving the "lowest security level interface," aka Bug ID CSCsv40504.
A buffer overflow vulnerability in the Simple Network Management Protocol (SNMP) code of Cisco ASA software could allow an attacker to cause a reload of the affected system or to remotely execute code.
A vulnerability in the command-line interface (CLI) parser of Cisco ASA software could allow an authenticated, local attacker to create a denial-of-service (DoS) condition or potentially execute code.
Cisco PIX 500 and ASA 5500 Series Security Appliances 7.0 before 7.0(4.14) and 7.1 before 7.1(2.1), and the FWSM 2.x before 2.3(4.12) and 3.x before 3.1(3.24), when "inspect http" is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed HTTP traffic.
Cisco PIX 500 and ASA 5500 Series Security Appliances 6.x before 6.3(5.115), 7.0 before 7.0(5.2), and 7.1 before 7.1(2.5), and the FWSM 3.x before 3.1(3.24), when the "inspect sip" option is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed SIP packets.
Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to inspect certain TCP-based protocols, allows remote attackers to cause a denial of service (device reboot) via malformed TCP packets.
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.2), 8.1 before 8.1(2.37), and 8.2 before 8.2(1.16); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (device reload) via malformed SIP messages, aka Bug ID CSCtc96018.
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.2 before 7.2(4.45), 8.0 before 8.0(4.44), 8.1 before 8.1(2.35), and 8.2 before 8.2(1.10), allows remote attackers to cause a denial of service (page fault and device reload) via a malformed DTLS message, aka Bug ID CSCtb64913 and "WebVPN DTLS Denial of Service Vulnerability."
Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) allows remote attackers to cause a denial of service (device crash) via a large number of LAN-to-LAN (aka L2L) IPsec sessions, aka Bug ID CSCth36592.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(4) and earlier allow remote attackers to cause a denial of service via a flood of packets, aka Bug ID CSCtg06316.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) do not properly preserve ACL behavior after a migration, which allows remote attackers to bypass intended access restrictions via an unspecified type of network traffic that had previously been denied, aka Bug ID CSCte46460.
Memory leak on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote attackers to cause a denial of service (memory consumption) by making multiple incorrect LDAP authentication attempts, aka Bug ID CSCtf29867.
Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(4) and earlier allows remote attackers to cause a denial of service (block exhaustion) via multicast traffic, aka Bug ID CSCtg63992.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) do not properly handle Online Certificate Status Protocol (OCSP) connection failures, which allows remote OCSP responders to cause a denial of service (TCP socket exhaustion) by rejecting connection attempts, aka Bug ID CSCsz36816.
Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) allows remote attackers to cause a denial of service (device crash) via multicast traffic, aka Bug IDs CSCtg61810 and CSCtg69742.
Unspecified vulnerability in the SIP inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.3(2) allows remote attackers to cause a denial of service (device crash) by making many SIP calls, aka Bug ID CSCte20030.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(3) and earlier allow remote attackers to cause a denial of service (block exhaustion) via EIGRP traffic that triggers an EIGRP multicast storm, aka Bug ID CSCtf20269.
The Neighbor Discovery (ND) protocol implementation in the IPv6 stack on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 8.2(3) and earlier, and Cisco PIX Security Appliances devices, allows remote attackers to cause a denial of service (CPU consumption and device hang) by sending many Router Advertisement (RA) messages with different source addresses, as demonstrated by the floodrouter6 program in the thc-ipv6 package, aka Bug ID CSCti24526.
Unspecified vulnerability in the SunRPC inspection feature on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software 7.2 before 7.2(5), 8.0 before 8.0(5.19), 8.1 before 8.1(2.47), and 8.2 before 8.2(2) and Cisco PIX Security Appliances 500 series devices allows remote attackers to cause a denial of service (device reload) via crafted SunRPC UDP packets, aka Bug ID CSCtc85753.
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.2), 8.1 before 8.1(2.37), and 8.2 before 8.2(1.16); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (device reload) via malformed SIP messages, aka Bug ID CSCsy91157.
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.2 before 7.2(4.46), 8.0 before 8.0(4.38), 8.1 before 8.1(2.29), and 8.2 before 8.2(1.5); and Cisco PIX 500 Series Security Appliance; allows remote attackers to cause a denial of service (prevention of new connections) via crafted TCP segments during termination of the TCP connection that cause the connection to remain in CLOSEWAIT status, aka "TCP Connection Exhaustion Denial of Service Vulnerability."
The Cisco Firewall Services Module (FWSM) 4.0 before 4.0(8), as used in for the Cisco Catalyst 6500 switches, Cisco 7600 routers, and ASA 5500 Adaptive Security Appliances, allows remote attackers to cause a denial of service (crash) via a malformed Skinny Client Control Protocol (SCCP) message.
Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) permit packets to pass before the configuration has been loaded, which might allow remote attackers to bypass intended access restrictions by sending network traffic during device startup, aka Bug ID CSCsy86769.
Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote attackers to bypass SMTP inspection via vectors involving a prepended space character, aka Bug ID CSCte14901.
A vulnerability in the Deterministic Random Bit Generator (DRBG), also known as Pseudorandom Number Generator (PRNG), used in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a cryptographic collision, enabling the attacker to discover the private key of an affected device. The vulnerability is due to insufficient entropy in the DRBG when generating cryptographic keys. An attacker could exploit this vulnerability by generating a large number of cryptographic keys on an affected device and looking for collisions with target devices. A successful exploit could allow the attacker to impersonate an affected target device or to decrypt traffic secured by an affected key that is sent to or from an affected target device.
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(5.7), 8.1 before 8.1(2.40), and 8.2 before 8.2(2.1); and Cisco PIX 500 Series Security Appliance; allows remote attackers to bypass NTLMv1 authentication via a crafted username, aka Bug ID CSCte21953.
Unspecified vulnerability in Cisco ASA 5500 Series Adaptive Security Appliance 7.0 before 7.0(8.10), 7.2 before 7.2(4.45), 8.0 before 8.0(4.44), 8.1 before 8.1(2.35), and 8.2 before 8.2(1.10) allows remote attackers to cause a denial of service (device reload) via a malformed TCP segment when certain NAT translation and Cisco AIP-SSM configurations are used, aka Bug ID CSCtb37219.
Unspecified vulnerability on Cisco Adaptive Security Appliances (ASA) 5500 series devices with software before 8.2(3) allows remote authenticated users to cause a denial of service (device crash) via a high volume of IPsec traffic, aka Bug ID CSCsx52748.