A vulnerability in the implementation of Network Address Translation (NAT) functionality in Cisco IOS 12.4 through 15.6 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to the improper translation of H.323 messages that use the Registration, Admission, and Status (RAS) protocol and are sent to an affected device via IPv4 packets. An attacker could exploit this vulnerability by sending a crafted H.323 RAS packet through an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition. This vulnerability affects Cisco devices that are configured to use an application layer gateway with NAT (NAT ALG) for H.323 RAS messages. By default, a NAT ALG is enabled for H.323 RAS messages. Cisco Bug IDs: CSCvc57217.

The L2TP module in Cisco IOS XE 3.10S(.2) and earlier on ASR 1000 routers allows remote authenticated users to cause a denial of service (ESP card reload) via a malformed L2TP packet, aka Bug ID CSCun09973.

Cisco IOS before 15.1(1)SY1 allows remote authenticated users to cause a denial of service (device reload) by establishing a VPN session and then sending malformed IKEv2 packets, aka Bug ID CSCub39268.

Cisco IOS before 15.1(1)SY on ASR 1000 devices, when Multicast Listener Discovery (MLD) tracking is enabled for IPv6, allows remote attackers to cause a denial of service (device reload) via crafted MLD packets, aka Bug ID CSCtz28544.

Cisco ASR 1000 devices with software before 3.8S, when BDI routing is enabled, allow remote attackers to cause a denial of service (device reload) via crafted (1) broadcast or (2) multicast ICMP packets with fragmentation, aka Bug ID CSCub55948.

Cisco IOS XE on ASR1000 devices, when PPPoE termination is enabled, allows remote attackers to cause a denial of service (device reload) via a malformed PPPoE packet, aka Bug ID CSCuo55180.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) support for the AutoReconnect feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to exhaust the free IP addresses from the assigned local pool. This vulnerability occurs because the code does not release the allocated IP address under certain failure conditions. An attacker could exploit this vulnerability by trying to connect to the device with a non-AnyConnect client. A successful exploit could allow the attacker to exhaust the IP addresses from the assigned local pool, which prevents users from logging in and leads to a denial of service (DoS) condition.

A vulnerability in the application-hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. The attacker could execute IOS XE commands outside the application-hosting subsystem Docker container as well as on the underlying Linux operating system. These commands could be run as the root user. The vulnerability is due to a combination of two factors: (a) incomplete input validation of the user payload of CLI commands, and (b) improper role-based access control (RBAC) when commands are issued at the command line within the application-hosting subsystem. An attacker could exploit this vulnerability by using a CLI command with crafted user input. A successful exploit could allow the lower-privileged attacker to execute arbitrary CLI commands with root privileges. The attacker would need valid user credentials to exploit this vulnerability.

A vulnerability in the file system permissions of Cisco IOS XE Software could allow an authenticated, local attacker to obtain read and write access to critical configuration or system files. The vulnerability is due to insufficient file system permissions on an affected device. An attacker could exploit this vulnerability by connecting to an affected device's guest shell, and accessing or modifying restricted files. A successful exploit could allow the attacker to view or modify restricted information or configurations that are normally not accessible to system administrators.

A vulnerability in the IP Version 4 (IPv4) processing code of Cisco IOS XE Software running on Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to incorrect processing of certain IPv4 packets. An attacker could exploit this vulnerability by sending specific IPv4 packets to an IPv4 address on an affected device. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. If the switch does not reboot when under attack, it would require manual intervention to reload the device. This vulnerability affects Cisco Catalyst 3850 and Cisco Catalyst 3650 Series Switches that are running Cisco IOS XE Software Release 16.1.1 or later, until the first fixed release, and are configured with an IPv4 address. Cisco Bug IDs: CSCvd80714.

Multiple vulnerabilities in the web-based user interface (Web UI) of Cisco IOS XE Software could allow an authenticated, remote attacker to execute commands with elevated privileges on the affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the logic that handles access control to one of the hardware components in Cisco's proprietary Secure Boot implementation could allow an authenticated, local attacker to write a modified firmware image to the component. This vulnerability affects multiple Cisco products that support hardware-based Secure Boot functionality. The vulnerability is due to an improper check on the area of code that manages on-premise updates to a Field Programmable Gate Array (FPGA) part of the Secure Boot hardware implementation. An attacker with elevated privileges and access to the underlying operating system that is running on the affected device could exploit this vulnerability by writing a modified firmware image to the FPGA. A successful exploit could either cause the device to become unusable (and require a hardware replacement) or allow tampering with the Secure Boot verification process, which under some circumstances may allow the attacker to install and boot a malicious software image. An attacker will need to fulfill all the following conditions to attempt to exploit this vulnerability: Have privileged administrative access to the device. Be able to access the underlying operating system running on the device; this can be achieved either by using a supported, documented mechanism or by exploiting another vulnerability that would provide an attacker with such access. Develop or have access to a platform-specific exploit. An attacker attempting to exploit this vulnerability across multiple affected platforms would need to research each one of those platforms and then develop a platform-specific exploit. Although the research process could be reused across different platforms, an exploit developed for a given hardware platform is unlikely to work on a different hardware platform.

A vulnerability in the web-based UI (web UI) of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. The vulnerability is due to insufficient CSRF protections for the web UI on an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the affected user. If the user has administrative privileges, the attacker could alter the configuration, execute commands, or reload an affected device. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software with the HTTP Server feature enabled. The default state of the HTTP Server feature is version dependent.

A vulnerability in the Ident protocol handler of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability exists because the affected software incorrectly handles memory structures, leading to a NULL pointer dereference. An attacker could exploit this vulnerability by opening a TCP connection to specific ports and sending traffic over that connection. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in Unified Threat Defense (UTD) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to improper validation of IPv6 packets through the UTD feature. An attacker could exploit this vulnerability by sending IPv6 traffic through an affected device that is configured with UTD. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the common Session Initiation Protocol (SIP) library of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient sanity checks on an internal data structure. An attacker could exploit this vulnerability by sending a sequence of malicious SIP messages to an affected device. An exploit could allow the attacker to cause a NULL pointer dereference, resulting in a crash of the iosd process. This triggers a reload of the device.

A vulnerability in Cisco IOS XE SD-WAN Software could allow an unauthenticated, local attacker to gain unauthorized access to an affected device. The vulnerability is due to the existence of default credentials within the default configuration of an affected device. An attacker who has access to an affected device could log in with elevated privileges. A successful exploit could allow the attacker to take complete control of the device. This vulnerability affects Cisco devices that are running Cisco IOS XE SD-WAN Software releases 16.11 and earlier.

A vulnerability in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by authenticating to the device and submitting crafted input to the CLI utility. The attacker must be authenticated to access the CLI utility. A successful exploit could allow the attacker to execute commands with root privileges.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to escalate their privileges to a user with root-level privileges. The vulnerability is due to insufficient validation of user-supplied content. This vulnerability could allow an attacker to load malicious software onto an affected device.

A vulnerability in the Cisco IOS XE ROM Monitor (ROMMON) Software for Cisco 4000 Series Integrated Services Routers, Cisco ASR 920 Series Aggregation Services Routers, Cisco ASR 1000 Series Aggregation Services Routers, and Cisco cBR-8 Converged Broadband Routers could allow an unauthenticated, physical attacker to break the chain of trust and load a compromised software image on an affected device. The vulnerability is due to the presence of a debugging configuration option in the affected software. An attacker could exploit this vulnerability by connecting to an affected device through the console, forcing the device into ROMMON mode, and writing a malicious pattern using that specific option on the device. A successful exploit could allow the attacker to break the chain of trust and load a compromised software image on the affected device. A compromised software image is any software image that has not been digitally signed by Cisco.

A vulnerability in the ISDN subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient input validation when the ISDN Q.931 messages are processed. An attacker could exploit this vulnerability by sending a malicious ISDN Q.931 message to an affected device. A successful exploit could allow the attacker to cause the process to crash, resulting in a reload of the affected device.

A vulnerability in the IP Address Resolution Protocol (ARP) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers with a 20-Gbps Embedded Services Processor (ESP) installed could allow an unauthenticated, adjacent attacker to cause an affected device to reload, resulting in a denial of service condition. The vulnerability is due to insufficient error handling when an affected device has reached platform limitations. An attacker could exploit this vulnerability by sending a malicious series of IP ARP messages to an affected device. A successful exploit could allow the attacker to exhaust system resources, which would eventually cause the affected device to reload.

Multiple vulnerabilities in the Zone-Based Firewall feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload or stop forwarding traffic through the firewall. The vulnerabilities are due to incomplete handling of Layer 4 packets through the device. An attacker could exploit these vulnerabilities by sending a certain sequence of traffic patterns through the device. A successful exploit could allow the attacker to cause the device to reload or stop forwarding traffic through the firewall, resulting in a denial of service. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the implementation of Multiprotocol Border Gateway Protocol (MP-BGP) for the Layer 2 VPN (L2VPN) Ethernet VPN (EVPN) address family in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of Border Gateway Protocol (BGP) update messages that contain crafted EVPN attributes. An attacker could exploit this vulnerability by sending BGP update messages with specific, malformed attributes to an affected device. A successful exploit could allow the attacker to cause an affected device to crash, resulting in a DoS condition.

Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to gain unauthorized read access to sensitive data or cause the web management software to hang or crash, resulting in a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to gain unauthorized read access to sensitive data or cause the web management software to hang or crash, resulting in a denial of service (DoS) condition. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the WLAN Local Profiling feature of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incorrect parsing of HTTP packets while performing HTTP-based endpoint device classifications. An attacker could exploit this vulnerability by sending a crafted HTTP packet to an affected device. A successful exploit could cause an affected device to reboot, resulting in a DoS condition.

Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to elevate privileges to the level of an Administrator user on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the implementation of the Lua interpreter that is integrated in Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary code with root privileges on the underlying Linux operating system (OS) of an affected device. The vulnerability is due to insufficient restrictions on Lua function calls within the context of user-supplied Lua scripts. An attacker with valid administrative credentials could exploit this vulnerability by submitting a malicious Lua script. When this file is processed, an exploitable buffer overflow condition could occur. A successful exploit could allow the attacker to execute arbitrary code with root privileges on the underlying Linux OS of the affected device.

A vulnerability in the IP Service Level Agreement (SLA) responder feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the IP SLA responder to reuse an existing port, resulting in a denial of service (DoS) condition. The vulnerability exists because the IP SLA responder could consume a port that could be used by another feature. An attacker could exploit this vulnerability by sending specific IP SLA control packets to the IP SLA responder on an affected device. The control packets must include the port number that could be used by another configured feature. A successful exploit could allow the attacker to cause an in-use port to be consumed by the IP SLA responder, impacting the feature that was using the port and resulting in a DoS condition.