A vulnerability in the DHCP snooping feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a crafted IPv4 DHCP request packet being mishandled when endpoint analytics are enabled. An attacker could exploit this vulnerability by sending a crafted DHCP request through an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Note: The attack vector is listed as network because a DHCP relay anywhere on the network could allow exploits from networks other than the adjacent one.

A vulnerability in the Wireless Network Control daemon (wncd) of Cisco IOS XE Software for Wireless LAN Controllers could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper memory management. An attacker could exploit this vulnerability by sending a series of network requests to an affected device. A successful exploit could allow the attacker to cause the wncd process to consume available memory and eventually cause the device to reload, resulting in a DoS condition.

A vulnerability in the web UI of Cisco IOS XE Software could allow an authenticated, remote attacker to perform a directory traversal and access resources that are outside the filesystem mountpoint of the web UI. This vulnerability is due to an insufficient security configuration. An attacker could exploit this vulnerability by sending a crafted request to the web UI. A successful exploit could allow the attacker to gain read access to files that are outside the filesystem mountpoint of the web UI. Note: These files are located on a restricted filesystem that is maintained for the web UI. There is no ability to write to any files on this filesystem.

A vulnerability in the access point (AP) joining process of the Control and Provisioning of Wireless Access Points (CAPWAP) protocol of Cisco IOS XE Software for Wireless LAN Controllers (WLCs) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a logic error that occurs when certain conditions are met during the AP joining process. An attacker could exploit this vulnerability by adding an AP that is under their control to the network. The attacker then must ensure that the AP successfully joins an affected wireless controller under certain conditions. Additionally, the attacker would need the ability to restart a valid AP that was previously connected to the controller. A successful exploit could allow the attacker to cause the affected device to restart unexpectedly, resulting in a DoS condition.

A vulnerability in the Cisco IOx application hosting subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to root on an affected device. This vulnerability is due to insufficient restrictions on the hosted application. An attacker could exploit this vulnerability by logging in to and then escaping the Cisco IOx application container. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges.

A vulnerability in the 802.11 association frame validation of Cisco Catalyst 9100 Series Access Points (APs) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of certain parameters within association request frames received by the AP. An attacker could exploit this vulnerability by sending a crafted 802.11 association request to a nearby device. An exploit could allow the attacker to unexpectedly reload the device, resulting in a DoS condition.

A vulnerability in the processing of malformed Common Industrial Protocol (CIP) packets that are sent to Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient input validation during processing of CIP packets. An attacker could exploit this vulnerability by sending a malformed CIP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to unexpectedly reload, resulting in a DoS condition.

A vulnerability in the processing of Control and Provisioning of Wireless Access Points (CAPWAP) Mobility messages in Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a logic error and improper management of resources related to the handling of CAPWAP Mobility messages. An attacker could exploit this vulnerability by sending crafted CAPWAP Mobility packets to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected device. This would cause the device to reload, resulting in a DoS condition.

A vulnerability in the self-healing functionality of Cisco IOS XE Software for Embedded Wireless Controllers on Catalyst Access Points could allow an authenticated, local attacker to escape the restricted controller shell and execute arbitrary commands on the underlying operating system of the access point. This vulnerability is due to improper checks throughout the restart of certain system processes. An attacker could exploit this vulnerability by logging on to an affected device and executing certain CLI commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS as root. To successfully exploit this vulnerability, an attacker would need valid credentials for a privilege level 15 user of the wireless controller.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI API. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges. To exploit this vulnerability, an attacker must have valid Administrator privileges on the affected device.

A vulnerability in the UDP processing functionality of Cisco IOS XE Software for Embedded Wireless Controllers on Catalyst 9100 Series Access Points could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of UDP datagrams. An attacker could exploit this vulnerability by sending malicious UDP datagrams to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the DHCP processing functionality of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of DHCP messages. An attacker could exploit this vulnerability by sending malicious DHCP messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the Simple Network Management Protocol (SNMP) of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an authenticated, remote attacker to access sensitive information. This vulnerability is due to insufficient restrictions that allow a sensitive configuration detail to be disclosed. An attacker could exploit this vulnerability by retrieving data through SNMP read-only community access. A successful exploit could allow the attacker to view Service Set Identifier (SSID) preshared keys (PSKs) that are configured on the affected device.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) support for the AutoReconnect feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to exhaust the free IP addresses from the assigned local pool. This vulnerability occurs because the code does not release the allocated IP address under certain failure conditions. An attacker could exploit this vulnerability by trying to connect to the device with a non-AnyConnect client. A successful exploit could allow the attacker to exhaust the IP addresses from the assigned local pool, which prevents users from logging in and leads to a denial of service (DoS) condition.

A vulnerability in Ethernet over GRE (EoGRE) packet processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9800 Family Wireless Controller, Embedded Wireless Controller, and Embedded Wireless on Catalyst 9000 Series Switches could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper processing of malformed EoGRE packets. An attacker could exploit this vulnerability by sending malicious packets to the affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the SSH management feature of multiple Cisco Access Points (APs) platforms could allow a local, authenticated user to modify files on the affected device and possibly gain escalated privileges. The vulnerability is due to improper checking on file operations within the SSH management interface. A network administrator user could exploit this vulnerability by accessing an affected device through SSH management to make a configuration change. A successful exploit could allow the attacker to gain privileges equivalent to the root user.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to execute arbitrary code with administrative privileges or cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a logic error that occurs during the validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a crafted CAPWAP packet to an affected device. A successful exploit could allow the attacker to execute arbitrary code with administrative privileges or cause the affected device to crash and reload, resulting in a DoS condition.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

Multiple vulnerabilities in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to insufficient validation of CAPWAP packets. An attacker could exploit the vulnerabilities by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

A vulnerability in IPv6 traffic processing of Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a Layer 2 (L2) loop in a configured VLAN, resulting in a denial of service (DoS) condition for that VLAN. The vulnerability is due to a logic error when processing specific link-local IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that would flow inbound through the wired interface of an affected device. A successful exploit could allow the attacker to cause traffic drops in the affected VLAN, thus triggering the DoS condition.

A vulnerability in the Link Layer Discovery Protocol (LLDP) message parser of Cisco IOS Software and Cisco IOS XE Software could allow an attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. This vulnerability is due to improper initialization of a buffer. An attacker could exploit this vulnerability via any of the following methods: An authenticated, remote attacker could access the LLDP neighbor table via either the CLI or SNMP while the device is in a specific state. An unauthenticated, adjacent attacker could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then waiting for an administrator of the device or a network management system (NMS) managing the device to retrieve the LLDP neighbor table of the device via either the CLI or SNMP. An authenticated, adjacent attacker with SNMP read-only credentials or low privileges on the device CLI could corrupt the LLDP neighbor table by injecting specific LLDP frames into the network and then accessing the LLDP neighbor table via either the CLI or SNMP. A successful exploit could allow the attacker to cause the affected device to crash, resulting in a reload of the device.

A vulnerability in the implementation of a CLI command in Cisco Aironet Access Points (AP) could allow an authenticated, local attacker to overwrite files in the flash memory of the device. This vulnerability is due to insufficient input validation for a specific command. An attacker could exploit this vulnerability by issuing a command with crafted arguments. A successful exploit could allow the attacker to overwrite or create files with data that is already present in other files that are hosted on the affected device.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

A vulnerability in the boot logic of Cisco Access Points Software could allow an authenticated, local attacker to execute unsigned code at boot time. The vulnerability is due to an improper check that is performed by the area of code that manages system startup processes. An attacker could exploit this vulnerability by modifying a specific file that is stored on the system, which would allow the attacker to bypass existing protections. A successful exploit could allow the attacker to execute unsigned code at boot time and bypass the software image verification check part of the secure boot process of an affected device. Note: To exploit this vulnerability, the attacker would need to have access to the development shell (devshell) on the device.

A vulnerability in the multicast DNS (mDNS) gateway feature of Cisco Aironet Series Access Points Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of incoming mDNS traffic. An attacker could exploit this vulnerability by sending a crafted mDNS packet to an affected device through a wireless network that is configured in FlexConnect local switching mode or through a wired network on a configured mDNS VLAN. A successful exploit could allow the attacker to cause the access point (AP) to reboot, resulting in a DoS condition.

A vulnerability in the FlexConnect Upgrade feature of Cisco Aironet Series Access Points Software could allow an unauthenticated, remote attacker to obtain confidential information from an affected device. This vulnerability is due to an unrestricted Trivial File Transfer Protocol (TFTP) configuration. An attacker could exploit this vulnerability by sending a specific TFTP request to an affected device. A successful exploit could allow the attacker to download any file from the filesystem of the affected access point (AP).

Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to elevate privileges to the level of an Administrator user on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the multicast DNS (mDNS) feature of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper validation of mDNS packets. An attacker could exploit this vulnerability by sending a crafted mDNS packet to an affected device. A successful exploit could cause a device to reload, resulting in a DoS condition.