A vulnerability in the Link Layer Discovery Protocol (LLDP) feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of specific fields in an LLDP frame. An attacker could exploit this vulnerability by sending a crafted LLDP packet to an interface of an affected device and having an authenticated user retrieve LLDP statistics from the affected device through CLI show commands or Simple Network Management Protocol (SNMP) requests. A successful exploit could allow the attacker to cause the LLDP service to crash and stop running on the affected device. In certain situations, the LLDP crash may result in a reload of the affected device. Note: LLDP is a Layer 2 link protocol. To exploit this vulnerability, an attacker would need to be directly connected to an interface of an affected device, either physically or logically (for example, through a Layer 2 Tunnel configured to transport the LLDP protocol).

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to create a file or overwrite any file on the filesystem of an affected device, including system files. The vulnerability occurs because there is no validation of parameters when a specific CLI command is used. An attacker could exploit this vulnerability by authenticating to an affected device and using the command at the CLI. A successful exploit could allow the attacker to overwrite any file on the disk of the affected device, including system files. The attacker must have valid administrative credentials on the affected device to exploit this vulnerability.

A vulnerability in the backup configuration feature of Cisco UCS Manager Software and in the configuration export feature of Cisco FXOS Software could allow an unauthenticated attacker with access to a backup file to decrypt sensitive information stored in the full state and configuration backup files. This vulnerability is due to a weakness in the encryption method used for the backup function. An attacker could exploit this vulnerability by leveraging a static key used for the backup configuration feature. A successful exploit could allow the attacker to decrypt sensitive information that is stored in full state and configuration backup files, such as local user credentials, authentication server passwords, Simple Network Management Protocol (SNMP) community names, and other credentials.

A vulnerability in the CLI of Cisco Firepower 4100 Series, Cisco Firepower 9300 Security Appliances, and Cisco UCS 6200, 6300, 6400, and 6500 Series Fabric Interconnects could allow an authenticated, local attacker to inject unauthorized commands. This vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute unauthorized commands within the CLI. An attacker with Administrator privileges could also execute arbitrary commands on the underlying operating system of Cisco UCS 6400 and 6500 Series Fabric Interconnects with root-level privileges.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The attacker would need to have Administrator privileges on the device. This vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the handling of RSA keys on devices running Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to retrieve an RSA private key. This vulnerability is due to a logic error when the RSA key is stored in memory on a hardware platform that performs hardware-based cryptography. An attacker could exploit this vulnerability by using a Lenstra side-channel attack against the targeted device. A successful exploit could allow the attacker to retrieve the RSA private key. The following conditions may be observed on an affected device: This vulnerability will apply to approximately 5 percent of the RSA keys on a device that is running a vulnerable release of Cisco ASA Software or Cisco FTD Software; not all RSA keys are expected to be affected due to mathematical calculations applied to the RSA key. The RSA key could be valid but have specific characteristics that make it vulnerable to the potential leak of the RSA private key. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic. See the Indicators of Compromise section for more information on the detection of this type of RSA key. The RSA key could be malformed and invalid. A malformed RSA key is not functional, and a TLS client connection to a device that is running Cisco ASA Software or Cisco FTD Software that uses the malformed RSA key will result in a TLS signature failure, which means a vulnerable software release created an invalid RSA signature that failed verification. If an attacker obtains the RSA private key, they could use the key to impersonate a device that is running Cisco ASA Software or Cisco FTD Software or to decrypt the device traffic.

A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted DTLS traffic to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected VPN headend device. This could cause existing DTLS tunnels to stop passing traffic and prevent new DTLS tunnels from establishing, resulting in a DoS condition. Note: When the attack traffic stops, the device recovers gracefully.

Summary

Log4j versions prior to 2.16.0 are subject to a remote code execution vulnerability via the ldap JNDI parser. As per Apache's Log4j security guide: Apache Log4j2 <=2.14.1 JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.16.0, this behavior has been disabled by default.

Log4j version 2.15.0 contained an earlier fix for the vulnerability, but that patch did not disable attacker-controlled JNDI lookups in all situations. For more information, see the Updated advice for version 2.16.0 section of this advisory.

Impact

Logging untrusted or user controlled data with a vulnerable version of Log4J may result in Remote Code Execution (RCE) against your application. This includes untrusted data included in logged errors such as exception traces, authentication failures, and other unexpected vectors of user controlled input.

Affected versions

Any Log4J version prior to v2.15.0 is affected to this specific issue.

The v1 branch of Log4J which is considered End Of Life (EOL) is vulnerable to other RCE vectors so the recommendation is to still update to 2.16.0 where possible.

Security releases Additional backports of this fix have been made available in versions 2.3.1, 2.12.2, and 2.12.3

Affected packages Only the org.apache.logging.log4j:log4j-core package is directly affected by this vulnerability. The org.apache.logging.log4j:log4j-api should be kept at the same version as the org.apache.logging.log4j:log4j-core package to ensure compatability if in use.

Remediation Advice

Updated advice for version 2.16.0

The Apache Logging Services team provided updated mitigation advice upon the release of version 2.16.0, which disables JNDI by default and completely removes support for message lookups. Even in version 2.15.0, lookups used in layouts to provide specific pieces of context information will still recursively resolve, possibly triggering JNDI lookups. This problem is being tracked as CVE-2021-45046. More information is available on the GitHub Security Advisory for CVE-2021-45046.

Users who want to avoid attacker-controlled JNDI lookups but cannot upgrade to 2.16.0 must ensure that no such lookups resolve to attacker-provided data and ensure that the the JndiLookup class is not loaded.

Please note that Log4J v1 is End Of Life (EOL) and will not receive patches for this issue. Log4J v1 is also vulnerable to other RCE vectors and we recommend you migrate to Log4J 2.16.0 where possible.

A vulnerability in the Unidirectional Link Detection (UDLD) feature of Cisco FXOS Software, Cisco IOS Software, Cisco IOS XE Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause an affected device to reload. This vulnerability is due to improper input validation of the UDLD packets. An attacker could exploit this vulnerability by sending specifically crafted UDLD packets to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. Note: The UDLD feature is disabled by default, and the conditions to exploit this vulnerability are strict. An attacker must have full control of a directly connected device. On Cisco IOS XR devices, the impact is limited to the reload of the UDLD process.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands with root privileges on the underlying operating system of an affected device that is running in multi-instance mode. This vulnerability is due to insufficient validation of user-supplied command arguments. An attacker could exploit this vulnerability by submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the secure boot process of Cisco FXOS Software could allow an authenticated, local attacker to bypass the secure boot mechanisms. The vulnerability is due to insufficient protections of the secure boot process. An attacker could exploit this vulnerability by injecting code into a specific file that is then referenced during the device boot process. A successful exploit could allow the attacker to break the chain of trust and inject code into the boot process of the device which would be executed at each boot and maintain persistence across reboots.

A vulnerability in the Cisco Firepower Chassis Manager (FCM) of Cisco FXOS Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack against a user of an affected device. The vulnerability is due to insufficient CSRF protections for the FCM interface. An attacker could exploit this vulnerability by persuading a targeted user to click a malicious link. A successful exploit could allow the attacker to send arbitrary requests that could take unauthorized actions on behalf of the targeted user.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to inject arbitrary commands that are executed with root privileges. The vulnerability is due to insufficient input validation of commands supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input to the affected command. A successful exploit could allow the attacker to execute commands on the underlying operating system with root privileges.

A vulnerability in the CLI of Cisco FXOS Software could allow an authenticated, local attacker to read or write arbitrary files on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to a specific CLI command. A successful exploit could allow the attacker to read or write to arbitrary files on the underlying OS.

A vulnerability in the CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS). The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the local management (local-mgmt) CLI of Cisco FXOS Software and Cisco UCS Manager Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by including crafted arguments to specific commands. A successful exploit could allow the attacker to execute arbitrary commands on the underlying OS with the privileges of the currently logged-in user for all affected platforms excluding Cisco UCS 6400 Series Fabric Interconnects. On Cisco UCS 6400 Series Fabric Interconnects, the injected commands are executed with root privileges.

A vulnerability in the Cisco Discovery Protocol feature of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to execute arbitrary code as root or cause a denial of service (DoS) condition on an affected device. The vulnerability exists because of insufficiently validated Cisco Discovery Protocol packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Discovery Protocol packet to a Layer 2-adjacent affected device. A successful exploit could allow the attacker to cause a buffer overflow that could allow the attacker to execute arbitrary code as root or cause a DoS condition on the affected device. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Note: This vulnerability is different from the following Cisco FXOS and NX-OS Software Cisco Discovery Protocol vulnerabilities that Cisco announced on Feb. 5, 2020: Cisco FXOS, IOS XR, and NX-OS Software Cisco Discovery Protocol Denial of Service Vulnerability and Cisco NX-OS Software Cisco Discovery Protocol Remote Code Execution Vulnerability.

A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

A vulnerability in the configuration of the Pluggable Authentication Module (PAM) used in Cisco Firepower Threat Defense (FTD) Software, Cisco Firepower Management Center (FMC) Software, and Cisco FXOS Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability is due to improper resource management in the context of user session management. An attacker could exploit this vulnerability by connecting to an affected system and performing many simultaneous successful Secure Shell (SSH) logins. A successful exploit could allow the attacker to exhaust system resources and cause the device to reload, resulting in a DoS condition. To exploit this vulnerability, the attacker needs valid user credentials on the system.

Multiple vulnerabilities in the CLI of Cisco FXOS Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute commands on the underlying operating system (OS) with root privileges. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by including crafted arguments to specific CLI commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges.

Multiple vulnerabilities in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their FTD instance and execute commands with root privileges in the host namespace. These vulnerabilities are due to insufficient protections on the underlying filesystem. An attacker could exploit these vulnerabilities by modifying critical files on the underlying filesystem. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running FTD instances.

Multiple vulnerabilities in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their FTD instance and execute commands with root privileges in the host namespace. These vulnerabilities are due to insufficient protections on the underlying filesystem. An attacker could exploit these vulnerabilities by modifying critical files on the underlying filesystem. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running FTD instances.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an authenticated, remote attacker to cause the SNMP application on an affected device to restart unexpectedly. The vulnerability is due to improper validation of Abstract Syntax Notation One (ASN.1)-encoded variables in SNMP packets. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the SNMP daemon on the affected device. A successful exploit could allow the attacker to cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause the SNMP application to leak system memory, which could cause an affected device to restart unexpectedly. The vulnerability is due to improper error handling when processing inbound SNMP packets. An attacker could exploit this vulnerability by sending multiple crafted SNMP packets to an affected device. A successful exploit could allow the attacker to cause the SNMP application to leak system memory because of an improperly handled error condition during packet processing. Over time, this memory leak could cause the SNMP application to restart multiple times, leading to a system-level restart and a denial of service (DoS) condition.

A vulnerability in the implementation of Security Assertion Markup Language (SAML) 2.0 Single Sign-On (SSO) for Clientless SSL VPN (WebVPN) and AnyConnect Remote Access VPN in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to successfully establish a VPN session to an affected device. The vulnerability is due to improper credential management when using NT LAN Manager (NTLM) or basic authentication. An attacker could exploit this vulnerability by opening a VPN session to an affected device after another VPN user has successfully authenticated to the affected device via SAML SSO. A successful exploit could allow the attacker to connect to secured networks behind the affected device.

Multiple vulnerabilities in the Application Layer Protocol Inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerabilities are due to logical errors during traffic inspection. An attacker could exploit these vulnerabilities by sending a high volume of malicious traffic across an affected device. An exploit could allow the attacker to cause a deadlock condition, resulting in a reload of an affected device. These vulnerabilities affect Cisco ASA Software and Cisco FTD Software configured for Application Layer Protocol Inspection running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4100 Series Security Appliance, Firepower 9300 ASA Security Module, FTD Virtual (FTDv). Cisco Bug IDs: CSCve61540, CSCvh23085, CSCvh95456.

A vulnerability in the authentication, authorization, and accounting (AAA) implementation of Cisco Firepower Extensible Operating System (FXOS) and NX-OS System Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability occurs because AAA processes prevent the NX-OS System Manager from receiving keepalive messages when an affected device receives a high rate of login attempts, such as in a brute-force login attack. System memory can run low on the FXOS devices under the same conditions, which could cause the AAA process to unexpectedly restart or cause the device to reload. An attacker could exploit this vulnerability by performing a brute-force login attack against a device that is configured with AAA security services. A successful exploit could allow the attacker to cause the affected device to reload. This vulnerability affects the following Cisco products if they are running Cisco FXOS or NX-OS System Software that is configured for AAA services: Firepower 4100 Series Next-Generation Firewall, Firepower 9300 Security Appliance, Multilayer Director Switches, Nexus 1000V Series Switches, Nexus 1100 Series Cloud Services Platforms, Nexus 2000 Series Switches, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5000 Series Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, Unified Computing System (UCS) 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCuq58760, CSCuq71257, CSCur97432, CSCus05214, CSCux54898, CSCvc33141, CSCvd36971, CSCve03660.