A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to retrieve memory contents on an affected device, which could lead to the disclosure of confidential information. The vulnerability is due to a buffer tracking issue when the software parses invalid URLs that are requested from the web services interface. An attacker could exploit this vulnerability by sending a crafted GET request to the web services interface. A successful exploit could allow the attacker to retrieve memory contents, which could lead to the disclosure of confidential information. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section.

A vulnerability in the sfmgr daemon of Cisco Firepower Management Center (FMC) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to perform directory traversal and access directories outside the restricted path. The vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by using a relative path in specific sfmgr commands. An exploit could allow the attacker to read or write arbitrary files on an sftunnel-connected peer device.

Multiple vulnerabilities in the CLI of Cisco FXOS Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute commands on the underlying operating system (OS) with root privileges. These vulnerabilities are due to insufficient input validation. An attacker could exploit these vulnerabilities by including crafted arguments to specific CLI commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges.

A vulnerability in the TCP ingress handler for the data interfaces that are configured with management access to Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an increase in CPU and memory usage, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient ingress TCP rate limiting for TCP ports 22 (SSH) and 443 (HTTPS). An attacker could exploit this vulnerability by sending a crafted, steady stream of TCP traffic to port 22 or 443 on the data interfaces that are configured with management access to the affected device.

A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the TCP processing engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to the improper handling of TCP traffic. An attacker could exploit this vulnerability by sending a specific sequence of packets at a high rate through an affected device. A successful exploit could allow the attacker to temporarily disrupt traffic through the device while it reboots.

A vulnerability in the implementation of the Lightweight Directory Access Protocol (LDAP) feature in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerabilities are due to the improper parsing of LDAP packets sent to an affected device. An attacker could exploit these vulnerabilities by sending a crafted LDAP packet, using Basic Encoding Rules (BER), to be processed by an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the Clientless SSL VPN (WebVPN) portal of Cisco Adaptive Security Appliance (ASA) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the web-based management interface of an affected device. The vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or allow the attacker to access sensitive browser-based information.

A vulnerability in the Session Initiation Protocol (SIP) inspection module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper parsing of SIP messages. An attacker could exploit this vulnerability by sending a malicious SIP packet through an affected device. A successful exploit could allow the attacker to trigger an integer underflow, causing the software to try to read unmapped memory and resulting in a crash.

A vulnerability in the WebVPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause increased CPU utilization on an affected device. The vulnerability is due to excessive processing load for a specific WebVPN HTTP page request. An attacker could exploit this vulnerability by sending multiple WebVPN HTTP page load requests for a specific URL. A successful exploit could allow the attacker to increase CPU load on the device, resulting in a denial of service (DoS) condition, which could cause traffic to be delayed through the device.

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to upload arbitrary-sized files to specific folders on an affected device, which could lead to an unexpected device reload. The vulnerability exists because the affected software does not efficiently handle the writing of large files to specific folders on the local file system. An attacker could exploit this vulnerability by uploading files to those specific folders. A successful exploit could allow the attacker to write a file that triggers a watchdog timeout, which would cause the device to unexpectedly reload, causing a denial of service (DoS) condition.

Multiple vulnerabilities in the secure boot process of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software for the Firepower 1000 Series and Firepower 2100 Series Appliances could allow an authenticated, local attacker to bypass the secure boot mechanism. The vulnerabilities are due to insufficient protections of the secure boot process. An attacker could exploit these vulnerabilities by injecting code into specific files that are then referenced during the device boot process. A successful exploit could allow the attacker to break the chain of trust and inject code into the boot process of the device, which would be executed at each boot and maintain persistence across reboots.

A vulnerability in the TCP packet processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory exhaustion condition. An attacker could exploit this vulnerability by sending a high rate of crafted TCP traffic through an affected device. A successful exploit could allow the attacker to exhaust device resources, resulting in a DoS condition for traffic transiting the affected device.

A vulnerability in the SIP inspection process of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a crash and reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a watchdog timeout and crash during the cleanup of threads that are associated with a SIP connection that is being deleted from the connection list. An attacker could exploit this vulnerability by sending a high rate of crafted SIP traffic through an affected device. A successful exploit could allow the attacker to cause a watchdog timeout and crash, resulting in a crash and reload of the affected device.

A vulnerability in dynamic access policies (DAP) functionality of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to improper processing of HostScan data received from the Posture (HostScan) module. An attacker could exploit this vulnerability by sending crafted HostScan data to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU ["https://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dap-dos-GhYZBxDU"] This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication.

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to conduct directory traversal attacks and read sensitive files on a targeted system. The vulnerability is due to a lack of proper input validation of URLs in HTTP requests processed by an affected device. An attacker could exploit this vulnerability by sending a crafted HTTP request containing directory traversal character sequences to an affected device. A successful exploit could allow the attacker to view arbitrary files within the web services file system on the targeted device. The web services file system is enabled when the affected device is configured with either WebVPN or AnyConnect features. This vulnerability cannot be used to obtain access to ASA or FTD system files or underlying operating system (OS) files.

A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload.

A vulnerability in the data acquisition (DAQ) component of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured access control policies or cause a denial of service (DoS) condition. The vulnerability exists because the affected software improperly manages system memory resources when inspecting traffic. An attacker could exploit this vulnerability by generating specific traffic patterns for the software to inspect. A successful exploit could allow the attacker to exhaust system memory resources used for traffic inspection. Depending on the configuration, the FTD Software could fail open and cease to inspect traffic or fail closed and result in a DoS condition. This vulnerability may require manual intervention to restore the software.

A vulnerability in the ICMP ingress packet processing of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 4110 appliances could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to incomplete input validation upon receiving ICMP packets. An attacker could exploit this vulnerability by sending a high number of crafted ICMP or ICMPv6 packets to an affected device. A successful exploit could allow the attacker to cause a memory exhaustion condition that may result in an unexpected reload. No manual intervention is needed to recover the device after the reload.

A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a large number of TCP packets to a specific port on an affected device. A successful exploit could allow the attacker to exhaust system memory, which could cause the device to reload unexpectedly. No manual intervention is needed to recover the device after it has reloaded.

A vulnerability in the SSL/TLS inspection of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series firewalls could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation for certain fields of specific SSL/TLS messages. An attacker could exploit this vulnerability by sending a malformed SSL/TLS message through an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. No manual intervention is needed to recover the device after it has reloaded.

A vulnerability in the multi-instance feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to escape the container for their Cisco FTD instance and execute commands with root privileges in the host namespace. The attacker must have valid credentials on the device.The vulnerability exists because a configuration file that is used at container startup has insufficient protections. An attacker could exploit this vulnerability by modifying a specific container configuration file on the underlying file system. A successful exploit could allow the attacker to execute commands with root privileges within the host namespace. This could allow the attacker to impact other running Cisco FTD instances or the host Cisco FXOS device.

A vulnerability in the processing of SSH connections for multi-instance deployments of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to a lack of proper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, which causes a DoS condition on the affected device. The device must be manually reloaded to recover.

A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a high rate of IPv4 or IPv6 traffic through an affected device. This traffic would need to match a configured block action in an access control policy. An exploit could allow the attacker to cause a memory exhaustion condition on the affected device, which would result in a DoS for traffic transiting the device, as well as sluggish performance of the management interface. Once the flood is stopped, performance should return to previous states.

A vulnerability in the management access list configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured management interface access list on an affected system. The vulnerability is due to the configuration of different management access lists, with ports allowed in one access list and denied in another. An attacker could exploit this vulnerability by sending crafted remote management traffic to the local IP address of an affected system. A successful exploit could allow the attacker to bypass the configured management access list policies, and traffic to the management interface would not be properly denied.

A vulnerability in the generic routing encapsulation (GRE) tunnel decapsulation feature of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory handling error when GRE over IPv6 traffic is processed. An attacker could exploit this vulnerability by sending crafted GRE over IPv6 packets with either IPv4 or IPv6 payload through an affected device. A successful exploit could allow the attacker to cause the device to crash, resulting in a DoS condition.

Summary

Log4j versions prior to 2.16.0 are subject to a remote code execution vulnerability via the ldap JNDI parser. As per Apache's Log4j security guide: Apache Log4j2 <=2.14.1 JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.16.0, this behavior has been disabled by default.

Log4j version 2.15.0 contained an earlier fix for the vulnerability, but that patch did not disable attacker-controlled JNDI lookups in all situations. For more information, see the Updated advice for version 2.16.0 section of this advisory.

Impact

Logging untrusted or user controlled data with a vulnerable version of Log4J may result in Remote Code Execution (RCE) against your application. This includes untrusted data included in logged errors such as exception traces, authentication failures, and other unexpected vectors of user controlled input.

Affected versions

Any Log4J version prior to v2.15.0 is affected to this specific issue.

The v1 branch of Log4J which is considered End Of Life (EOL) is vulnerable to other RCE vectors so the recommendation is to still update to 2.16.0 where possible.

Security releases Additional backports of this fix have been made available in versions 2.3.1, 2.12.2, and 2.12.3

Affected packages Only the org.apache.logging.log4j:log4j-core package is directly affected by this vulnerability. The org.apache.logging.log4j:log4j-api should be kept at the same version as the org.apache.logging.log4j:log4j-core package to ensure compatability if in use.

Remediation Advice

Updated advice for version 2.16.0

The Apache Logging Services team provided updated mitigation advice upon the release of version 2.16.0, which disables JNDI by default and completely removes support for message lookups. Even in version 2.15.0, lookups used in layouts to provide specific pieces of context information will still recursively resolve, possibly triggering JNDI lookups. This problem is being tracked as CVE-2021-45046. More information is available on the GitHub Security Advisory for CVE-2021-45046.

Users who want to avoid attacker-controlled JNDI lookups but cannot upgrade to 2.16.0 must ensure that no such lookups resolve to attacker-provided data and ensure that the the JndiLookup class is not loaded.

Please note that Log4J v1 is End Of Life (EOL) and will not receive patches for this issue. Log4J v1 is also vulnerable to other RCE vectors and we recommend you migrate to Log4J 2.16.0 where possible.

A vulnerability in the Deterministic Random Bit Generator (DRBG), also known as Pseudorandom Number Generator (PRNG), used in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a cryptographic collision, enabling the attacker to discover the private key of an affected device. The vulnerability is due to insufficient entropy in the DRBG when generating cryptographic keys. An attacker could exploit this vulnerability by generating a large number of cryptographic keys on an affected device and looking for collisions with target devices. A successful exploit could allow the attacker to impersonate an affected target device or to decrypt traffic secured by an affected key that is sent to or from an affected target device.

A vulnerability in the CLI of Cisco Firepower Threat Defense (FTD) Software and Cisco FXOS Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root. This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials.

A vulnerability in the TLS handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain access to sensitive information. This vulnerability is due to improper implementation of countermeasures against a Bleichenbacher attack on a device that uses SSL decryption policies. An attacker could exploit this vulnerability by sending crafted TLS messages to an affected device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device.