This one is as bad as it sounds. CVE-2026-76460 is an authentication bypass in Cisco ISE's admin API that gives unauthenticated attackers root-level command execution. No creds, no user interaction, no complexity. Every supported ISE version (3.1 through 3.51) is affected.
The kicker: Cisco explicitly says there are NO workarounds. You patch or you accept the risk. No ACL, no WAF rule, nothing.
It was found from a support ticket (someone noticed weird API behavior during troubleshooting) and was already being exploited in the wild before the patch dropped. CISA KEV listed it September 16, four days after patch release.
ISE is your NAC platform. It controls who gets on your network. Compromising it means controlling network access for your entire environment. Patch this weekend.
[\[link\]](https://medium.com/@neonmaxima/cisco-ise-just-got-a-cvss-10-0-and-the-only-workaround-is-patch-it-or-unplug-it-4099172d44b3?sharedUserId=neonmaxima)
A vulnerability in the Online Certificate Status Protocol (OCSP) responder of Cisco ISE and Cisco ISE-PIC could allow an unauthenticated, remote attacker to cause an administrative reload of the OCSP responder certificate and key material. This vulnerability is due to missing authentication on a function of the OCSP responder. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to cause the OCSP responder to reload certificate and key material on demand.
As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) engineering teams have conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20287 are related to improper privilege managment issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-269.
A vulnerability in the web-based management interface of Cisco Identify Services Engine (ISE) could allow an authenticated, remote attacker to modify parts of the configuration on an affected device. This vulnerability is due to the lack of server-side validation of Administrator permissions. An attacker could exploit this vulnerability by submitting a crafted HTTP request to an affected system. A successful exploit could allow the attacker to modify descriptions of files on a specific page. To exploit this vulnerability, an attacker would need valid Administrator credentials.
A vulnerability in Cisco ISE could allow an authenticated, remote attacker to conduct SQL injection attacks on an affected device. To exploit this vulnerability, the attacker must have at least low-privileged administrative credentials. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to read or modify data in the underlying database.
A vulnerability in Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to conduct an SQL or HQL injection attack on an affected device. This vulnerability is due to insufficient validation of user-supplied input to the affected APIs before it is used to build database queries. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to execute arbitrary SQL or HQL queries against the underlying database, which could allow the attacker to view or modify data that they are not authorized to access. To exploit this vulnerability, the attacker must have valid administrative credentials.
A vulnerability in an internal service of Cisco ISE and Cisco ISE-PIC could allow an unauthenticated, remote attacker to retrieve sensitive configuration information from an affected device. This vulnerability is due to missing authentication on the Policy Runtime Repository Table (PRRT) service. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to obtain sensitive configuration information from the affected device.
A vulnerability in the API of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to view sensitive information on an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient validation of user-supplied parameters in API requests. An attacker could exploit this vulnerability by sending a crafted API request to an affected device. A successful exploit could allow the attacker to gain access to sensitive information, including hashed credentials that could be used in future attacks.
A vulnerability in Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to conduct an SQL or HQL injection attack on an affected device. This vulnerability is due to insufficient validation of user-supplied input to the affected APIs before it is used to build database queries. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to execute arbitrary SQL or HQL queries against the underlying database, which could allow the attacker to view or modify data that they are not authorized to access. To exploit this vulnerability, the attacker must have valid administrative credentials.
A vulnerability in Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to conduct an SQL or HQL injection attack on an affected device. This vulnerability is due to insufficient validation of user-supplied input to the affected APIs before it is used to build database queries. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to execute arbitrary SQL or HQL queries against the underlying database, which could allow the attacker to view or modify data that they are not authorized to access. To exploit this vulnerability, the attacker must have valid administrative credentials.
A vulnerability in Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to conduct an SQL or HQL injection attack on an affected device. This vulnerability is due to insufficient validation of user-supplied input to the affected APIs before it is used to build database queries. An attacker could exploit this vulnerability by sending a crafted request to an affected device. A successful exploit could allow the attacker to execute arbitrary SQL or HQL queries against the underlying database, which could allow the attacker to view or modify data that they are not authorized to access. To exploit this vulnerability, the attacker must have valid administrative credentials.
A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to conduct a reflected cross-site scripting (XSS) attack against a user of the interface. This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information.
A vulnerability in the REST APIs of Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to conduct SQL injection attacks against the session database. This vulnerability is due to certain parameters being concatenated directly into SQL clauses without parameterization. An attacker could exploit this vulnerability by sending a crafted request that contains SQL statements in one of the affected parameters. A successful exploit could allow the attacker to read information from the session database. To exploit this vulnerability, the attacker must have valid administrative credentials.
A vulnerability in the endpoint posture status reporting functionality of the guest portal web application of Cisco ISE could allow an unauthenticated, remote attacker to submit forged posture status events into the endpoint posture pipeline. This vulnerability is due to insufficient authentication on an internal interface that is exposed through the guest portal. An attacker could exploit this vulnerability by sending a crafted request to an affected system. A successful exploit could allow the attacker to manipulate the posture status on the affected system.
A vulnerability in Cisco ISE could allow an authenticated, remote attacker to obtain write access on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain write access to the underlying operating system. To exploit this vulnerability, the attacker must have valid administrative credentials. Note: For CVE-2026-20282, Cisco has assigned a Security Impact Rating (SIR) of High rather than Medium as the score indicates. The reason is that it is easy to get to root from the achieved privilege level.
A vulnerability in the RADIUS feature of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of certain RADIUS requests. An attacker could exploit this vulnerability by sending a crafted RADIUS request directly to an affected device. A successful exploit could allow the attacker to cause the ISE node to become unavailable. For single node deployments in that condition, endpoints that have not already authenticated would be unable to access the network until the node comes back up on its own.
A vulnerability in Cisco ISE could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid high-privileged administrative credentials. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain system-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a DoS condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored.
As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC), engineering teams have conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20237 are related to improper input validation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-20.
As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) engineering teams have conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20234 are related to insufficiently protected credentials issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-522.
Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow a remote attacker to conduct SQL injection attacks on an affected device.For more information about these vulnerabilities, see the Details section of this advisory.Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-sql-inj-3QTKR947This advisory is part of a group of advisories. For a complete list of the advisories and links to them, see Cisco Advance Notification for Publication of September 16, 2026, Security Advisories. In addition, for further documentation of improvements and fixes in Cisco Identity Services Engine, see Cisco Identity Services Engine Security Hardening Release: September 2026.
Multiple vulnerabilities in Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to conduct SQL or HQL injection attacks on an affected device.These vulnerabilities are due to insufficient validation of user-supplied input to the affected APIs before it is used to build database queries. An attacker could exploit these vulnerabilities by sending a crafted request to an affected device. A successful exploit could allow the attacker to execute arbitrary SQL or HQL queries against the underlying database, which could allow the attacker to view or modify data that they are not authorized to access. To exploit these vulnerabilities, the attacker must have valid administrative credentials. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-multisql-inject-JnHK54RqThis advisory is part of a group of advisories. For a complete list of the advisories and links to them, see Cisco Advance Notification for Publication of September 16, 2026, Security Advisories. In addition, for further documentation of improvements and fixes in Cisco Identity Services Engine, see Cisco Identity Services Engine Security Hardening Release: September 2026.
Multiple vulnerabilities in Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit these vulnerabilities, the attacker must have valid administrative credentials.For more information about these vulnerabilities, see the Details section of this advisory.Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities.This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-rce-se7bYU57This advisory is part of a group of advisories. For a complete list of the advisories and links to them, see Cisco Advance Notification for Publication of September 16, 2026, Security Advisories. In addition, for further documentation of improvements and fixes in Cisco Identity Services Engine, see Cisco Identity Services Engine Security Hardening Release: September 2026.
A vulnerability in an API of Cisco Identity Services Engine (ISE) could allow an unauthenticated, remote attacker to bypass authentication. This vulnerability is due to insufficient authentication control on an API endpoint. An attacker could exploit this vulnerability by sending a crafted request to an affected API endpoint. A successful exploit could allow the attacker to gain unauthorized access to the affected device by bypassing the web-based management interface.
This vulnerability allows remote attackers to execute arbitrary code on affected installations of Cisco Identity Services Engine. Authentication is required to exploit this vulnerability. The ZDI has assigned a CVSS rating of 7.2. The following CVEs are assigned: CVE-2026-20181.
A vulnerability in Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to perform path traversal attacks on the underlying operating system to either read or delete arbitrary files. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to access sensitive files or delete arbitrary files on the affected system.
A vulnerability in Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to perform path traversal attacks on the underlying operating system to either read or delete arbitrary files. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to access sensitive files or delete arbitrary files on the affected system.Cisco plans to release software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ise-traversal-xNt7wb2Y
A vulnerability in Cisco ISE and ISE-PIC could allow an unauthenticated, remote attacker to view sensitive information on an affected device. This vulnerability is due to improper authorization checks when a resource is accessed. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain access to sensitive information, including hashed credentials that could be used in future attacks.
A vulnerability in Cisco ISE and ISE-PIC could allow an authenticated, remote attacker to execute arbitrary commands on the underlying operating system of an affected device. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to obtain user-level access to the underlying operating system and then elevate privileges to root. In single-node deployments, successful exploitation of this vulnerability could cause the affected ISE node to become unavailable, resulting in a denial of service (DoS) condition. In that condition, endpoints that have not already authenticated would be unable to access the network until the node is restored.
A vulnerability in the CLI of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, local attacker with administrative privileges to perform a command injection attack on the underlying operating system and elevate privileges to root. This vulnerability is due to insufficient validation of user supplied input. An attacker could exploit this vulnerability by providing crafted input to a specific CLI command. A successful exploit could allow the attacker to elevate their privileges to root on the underlying operating system.
A vulnerability in Cisco ISE and Cisco ISE-PIC could allow an authenticated, remote attacker to perform path traversal attacks on the underlying operating system and read arbitrary files. To exploit this vulnerability, the attacker must have valid administrative credentials. This vulnerability is due to improper validation of user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to access sensitive files on the affected system.