A vulnerability in the web services of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software, Cisco Secure Firewall Threat Defense (FTD) Software, Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, remote attacker (Cisco ASA and FTD Software) or authenticated, remote attacker (Cisco IOS, IOS XE, and IOS XR Software) with low user privileges to execute arbitrary code on an affected device. This vulnerability is due to improper validation of user-supplied input in HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web service on an affected device after obtaining additional information about the system, overcoming exploit mitigations, or both. A successful exploit could allow the attacker to execute arbitrary code as root, which may lead to the complete compromise of the affected device. For more information about this vulnerability, see the Details ["#details"] section of this advisory.

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to improper error handling when parsing SNMP requests. This vulnerability affects all versions of SNMP — Versions 1, 2c, and 3. An attacker could exploit this vulnerability by sending a malformed SNMP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly. The attacker must have the SNMPv1 or v2c read-only or read-write community string or valid SNMPv3 user credentials on the affected device.

A vulnerability in the Blocks Extensible Exchange Protocol (BEEP) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling when parsing a specific BEEP SOAP request. An attacker could exploit this vulnerability by sending a specific BEEP SOAP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.

A vulnerability in the Extensible Messaging Client Protocol (XMCP), also referred to as the External Client protocol, of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of malformed XMCP packets. An attacker could exploit this vulnerability by sending a malformed XMCP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. The attacker does not need the XMCP client username to exploit this vulnerability.

A vulnerability in the web-based management interface of Cisco IOS XE Software could allow an authenticated, remote attacker with low privileges to cause a denial of service (DoS) condition on an affected device.This vulnerability is due to insufficient error handling in the web-based management interface. An attacker could exploit this vulnerability by authenticating with a malformed certificate. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-xe-webui-dos-PtAODAWW

A vulnerability in the Blocks Extensible Exchange Protocol (BEEP) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.This vulnerability is due to improper handling when parsing a specific BEEP SOAP request. An attacker could exploit this vulnerability by sending a specific BEEP SOAP request to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address these vulnerabilities.This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxe-bing-MGHrFAkd

A vulnerability in the Extensible Messaging Client Protocol (XMCP), also referred to as the External Client protocol, of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.This vulnerability is due to improper handling of malformed XMCP packets. An attacker could exploit this vulnerability by sending a malformed XMCP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. The attacker does not need the XMCP client username to exploit this vulnerability.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. There is a mitigation that addresses this vulnerability.This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ios-xmcp-thbAr34t

A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow the following: An authenticated, remote attacker with low privileges could cause a denial of service (DoS) condition on an affected device that is running Cisco IOS Software or Cisco IOS XE Software. To cause the DoS, the attacker must have the SNMPv2c or earlier read-only community string or valid SNMPv3 user credentials. An authenticated, remote attacker with high privileges could execute code as the root user on an affected device that is running Cisco IOS XE Software. To execute code as the root user, the attacker must have the SNMPv1 or v2c read-only community string or valid SNMPv3 user credentials and administrative or privilege 15 credentials on the affected device. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device over IPv4 or IPv6 networks. This vulnerability is due to a stack overflow condition in the SNMP subsystem of the affected software. A successful exploit could allow a low-privileged attacker to cause the affected system to reload, resulting in a DoS condition, or allow a high-privileged attacker to execute arbitrary code as the root user and obtain full control of the affected system. Note: This vulnerability affects all versions of SNMP.

A vulnerability in the DHCP option 82 encapsulation functionality of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability exists because the affected software performs incomplete input validation of option 82 information that it receives in DHCP Version 4 (DHCPv4) packets from DHCP relay agents. An attacker could exploit this vulnerability by sending a crafted DHCPv4 packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco Bug IDs: CSCuh91645.

A vulnerability in the Border Gateway Protocol (BGP) over an Ethernet Virtual Private Network (EVPN) for Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the device to reload, resulting in a denial of service (DoS) condition, or potentially corrupt the BGP routing table, which could result in network instability. The vulnerability exists due to changes in the implementation of the BGP MPLS-Based Ethernet VPN RFC (RFC 7432) draft between IOS XE software releases. When the BGP Inclusive Multicast Ethernet Tag Route or BGP EVPN MAC/IP Advertisement Route update packet is received, it could be possible that the IP address length field is miscalculated. An attacker could exploit this vulnerability by sending a crafted BGP packet to an affected device after the BGP session was established. An exploit could allow the attacker to cause the affected device to reload or corrupt the BGP routing table; either outcome would result in a DoS. The vulnerability may be triggered when the router receives a crafted BGP message from a peer on an existing BGP session. This vulnerability affects all releases of Cisco IOS XE Software prior to software release 16.3 that support BGP EVPN configurations. If the device is not configured for EVPN, it is not vulnerable. Cisco Bug IDs: CSCui67191, CSCvg52875.

A vulnerability in the Secure Copy Protocol (SCP) server feature of Cisco IOS XE Software could allow an authenticated, local attacker with low privileges to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper handling of a malformed SCP request. An attacker could exploit this vulnerability by issuing a crafted command through SSH. A successful exploit could allow the attacker to cause the device to reload unexpectedly, resulting in a DoS condition.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incorrect privileges are associated with the start maintenance command. An attacker could exploit this vulnerability by accessing the management CLI of the affected device as a low-privileged user and using the start maintenance command. A successful exploit could allow the attacker to put the device in maintenance mode, which shuts down interfaces, resulting in a denial of service (DoS) condition. In case of exploitation, a device administrator can connect to the CLI and use the stop maintenance command to restore operations.

A vulnerability in the TLS library of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust the available memory of an affected device. This vulnerability is due to improper management of memory resources during TLS connection setup. An attacker could exploit this vulnerability by repeatedly triggering the conditions that cause the memory increase. This could be done in a variety of ways, such as by repeatedly attempting Extensible Authentication Protocol (EAP) authentication when local EAP is enabled on an affected device or by using a machine-in-the-middle attack and resetting TLS connections between the affected device and other devices. A successful exploit could allow the attacker to exhaust the available memory on an affected device, resulting in an unexpected reload and a denial of service (DoS) condition.

A vulnerability in the Internet Key Exchange version 2 (IKEv2) feature of Cisco IOS Software, Cisco IOS XE Software, Cisco Secure Firewall Adaptive Security Appliance (ASA) Software, and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a memory leak, resulting in a denial of service (DoS) condition on an affected device. This vulnerability is due to improper parsing of IKEv2 packets. An attacker could exploit this vulnerability by sending crafted IKEv2 packets to an affected device. A successful exploit of Cisco IOS Software and IOS XE Software could allow the attacker to cause the affected device to reload, resulting in a DoS condition. A successful exploit of Cisco Secure Firewall ASA Software and Secure FTD Software could allow the attacker to partially exhaust system memory, resulting in system instability, such as the inability to establish new IKEv2 VPN sessions. A manual reboot of the device is required to recover from this condition.

A vulnerability in the Lobby Ambassador web-based management API of Cisco IOS XE Software could allow an authenticated, remote attacker to elevate their privileges and access management APIs that would not normally be available for Lobby Ambassador users. This vulnerability exists because parameters that are received by an API endpoint are not sufficiently validated. An attacker could exploit this vulnerability by authenticating as a Lobby Ambassador user and sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to create a new user with privilege level 1 access to the web-based management API. The attacker would then be able to access the device with these new credentials and privileges.

A vulnerability in the web-based Cisco IOx application hosting environment management interface of Cisco IOS XE Software could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the web-based management interface of an affected

A vulnerability in the TLS library of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to exhaust the available memory of an affected device.This vulnerability is due to improper management of memory resources during TLS connection setup. An attacker could

A vulnerability in the Secure Copy Protocol (SCP) server feature of Cisco IOS XE Software could allow an authenticated, local attacker with low privileges to cause a denial of service (DoS) condition on an affected device.This vulnerability is due to improper handling of a malformed

A vulnerability in the Internet Key Exchange version 2 (IKEv2) feature of Cisco IOS Software, Cisco IOS XE Software, Cisco Secure Firewall Adaptive Security Appliance (ASA) Software, and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to

A vulnerability in the bootstrap loading of Cisco IOS XE Software could allow an authenticated, local attacker to write arbitrary files to an affected system. This vulnerability is due to insufficient input validation of the bootstrap file that is read by the system software when a device is first deployed in SD-WAN mode or when an administrator configures SD-Routing on the device. An attacker could exploit this vulnerability by modifying a bootstrap file generated by Cisco Catalyst SD-WAN Manager, loading it into the device flash, and then either reloading the device in a green field deployment in SD-WAN mode or configuring the device with SD-Routing. A successful exploit could allow the attacker to perform arbitrary file writes to the underlying operating system.

A vulnerability in the web-based management interface of the Wireless LAN Controller feature of Cisco IOS XE Software could allow an authenticated, remote attacker with a lobby ambassador user account to perform a command injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web-based management interface. A successful exploit could allow the attacker to execute arbitrary Cisco IOS XE Software CLI commands with privilege level 15. Note: This vulnerability is exploitable only if the attacker obtains the credentials for a lobby ambassador account. This account is not configured by default.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the web-based management interface of Cisco IOS XE Software could allow an authenticated, low-privileged, remote attacker to perform an injection attack against an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web-based management interface. A successful exploit could allow the attacker to read limited files from the underlying operating system or clear the syslog and licensing logs on the affected device.

A vulnerability in the HTTP API subsystem of Cisco IOS XE Software could allow a remote attacker to inject commands that will execute with root privileges into the underlying operating system. This vulnerability is due to insufficient input validation. An attacker with administrative privileges could exploit this vulnerability by authenticating to an affected system and performing an API call with crafted input. Alternatively, an unauthenticated attacker could persuade a legitimate user with administrative privileges who is currently logged in to the system to click a crafted link. A successful exploit could allow the attacker to execute arbitrary commands as the root user.

A vulnerability in the implementation of the TACACS+ protocol in Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to view sensitive data or bypass authentication. This vulnerability exists because the system does not properly check whether the required TACACS+ shared secret is configured. A machine-in-the-middle attacker could exploit this vulnerability by intercepting and reading unencrypted TACACS+ messages or impersonating the TACACS+ server and falsely accepting arbitrary authentication requests. A successful exploit could allow the attacker to view sensitive information in a TACACS+ message or bypass authentication and gain access to the affected device.

Multiple vulnerabilities in Cisco IOS XE Software of could allow an authenticated, local attacker with level-15 privileges or an unauthenticated attacker with physical access to the device to execute persistent code at boot time and break the chain of trust. These vulnerabilities are due path traversal and improper image integrity validation. A successful exploit could allow the attacker to execute persistent code on the underlying operating system. Because this allows the attacker to bypass a major security feature of the device, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High. For more information about these vulnerabilities, see the Details ["#details"] section of this advisory. ERP