As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20273 are related to improper input validation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-20.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20271 are related to insufficient control flow management issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-691.  

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20270 are related to incorrect calculation issues that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-682.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20269 are related to issues with improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664.

As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20268 are related to issues with improper restriction of operations within the bounds of a memory buffer that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-119.

A vulnerability in the IPv6 DHCP version 6 (DHCPv6) relay and server features of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to insufficient validation of data boundaries. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly.

A vulnerability in the HTTP-based client profiling feature of Cisco IOS XE Software for Wireless LAN Controllers (WLCs) could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation of received traffic. An attacker could exploit this vulnerability by sending crafted traffic through a wireless access point. A successful exploit could allow the attacker to cause CPU utilization to increase, which could result in a DoS condition on an affected device and could cause new wireless client associations to fail. Once the offending traffic stops, the affected system will return to an operational state and new client associations will succeed.

A vulnerability in the implementation of the IPv4 Virtual Fragmentation Reassembly (VFR) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper reassembly of large packets that occurs when VFR is enabled on either a tunnel interface or on a physical interface that is configured with a maximum transmission unit (MTU) greater than 4,615 bytes. An attacker could exploit this vulnerability by sending fragmented packets through a VFR-enabled interface on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the SSH implementation of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to improper handling of resources during an exceptional situation. An attacker could exploit this vulnerability by continuously connecting to an affected device and sending specific SSH requests. A successful exploit could allow the attacker to cause the affected device to reload.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the IPSec decryption routine of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to buffer exhaustion that occurs while traffic on a configured IPsec tunnel is being processed. An attacker could exploit this vulnerability by sending traffic to an affected device that has a maximum transmission unit (MTU) of 1800 bytes or greater. A successful exploit could allow the attacker to cause the device to reload. To exploit this vulnerability, the attacker may need access to the trusted network where the affected device is in order to send specific packets to be processed by the device. All network devices between the attacker and the affected device must support an MTU of 1800 bytes or greater. This access requirement could limit the possibility of a successful exploit.

A vulnerability in the CLI of Cisco IOS XE Software for Cisco Catalyst 9000 Family Switches and Cisco Catalyst 9000 Family Wireless Controllers could allow an authenticated, local attacker to elevate privileges to level 15 on an affected device. This vulnerability is due to insufficient validation of user privileges after the user executes certain CLI commands. An attacker could exploit this vulnerability by logging in to an affected device as a low-privileged user and then executing certain CLI commands. A successful exploit could allow the attacker to execute arbitrary commands with level 15 privileges on the affected device.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to inadequate input validation of incoming CAPWAP packets encapsulating multicast DNS (mDNS) queries. An attacker could exploit this vulnerability by connecting to a wireless network and sending a crafted mDNS query, which would flow through and be processed by the wireless controller. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

A vulnerability in the Application Visibility and Control (AVC-FNF) feature of Cisco IOS XE Software for Cisco Catalyst 9800 Series Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient packet verification for traffic inspected by the AVC feature. An attacker could exploit this vulnerability by sending crafted packets from the wired network to a wireless client, resulting in the crafted packets being processed by the wireless controller. A successful exploit could allow the attacker to cause a crash and reload of the affected device, resulting in a DoS condition.

A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition on the device. This vulnerability is due to a lack of input validation of the information used to generate an SNMP trap related to a wireless client connection event. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the NETCONF over SSH feature of Cisco IOS XE Software could allow a low-privileged, authenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to insufficient resource management. An attacker could exploit this vulnerability by initiating a large number of NETCONF over SSH connections. A successful exploit could allow the attacker to exhaust resources, causing the device to reload and resulting in a DoS condition on an affected device.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) support for the AutoReconnect feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to exhaust the free IP addresses from the assigned local pool. This vulnerability occurs because the code does not release the allocated IP address under certain failure conditions. An attacker could exploit this vulnerability by trying to connect to the device with a non-AnyConnect client. A successful exploit could allow the attacker to exhaust the IP addresses from the assigned local pool, which prevents users from logging in and leads to a denial of service (DoS) condition.

A vulnerability in IPv6 traffic processing of Cisco IOS XE Wireless Controller Software for Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, adjacent attacker to cause a Layer 2 (L2) loop in a configured VLAN, resulting in a denial of service (DoS) condition for that VLAN. The vulnerability is due to a logic error when processing specific link-local IPv6 traffic. An attacker could exploit this vulnerability by sending a crafted IPv6 packet that would flow inbound through the wired interface of an affected device. A successful exploit could allow the attacker to cause traffic drops in the affected VLAN, thus triggering the DoS condition.

A vulnerability in the TrustSec CLI parser of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to an improper interaction between the web UI and the CLI parser. An attacker could exploit this vulnerability by requesting a particular CLI command to be run through the web UI. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the DECnet Phase IV and DECnet/OSI protocol processing of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation of DECnet traffic that is received by an affected device. An attacker could exploit this vulnerability by sending DECnet traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the Control and Provisioning of Wireless Access Points (CAPWAP) protocol processing of Cisco IOS XE Wireless Controller Software for the Cisco Catalyst 9000 Family Wireless Controllers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition of an affected device. The vulnerability is due to insufficient validation of CAPWAP packets. An attacker could exploit this vulnerability by sending a malformed CAPWAP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to crash and reload, resulting in a DoS condition.

Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the CLI of Cisco IOS XE SD-WAN Software could allow an authenticated, local attacker to access the underlying operating system with root privileges. These vulnerabilities are due to insufficient input validation of certain CLI commands. An attacker could exploit these vulnerabilities by authenticating to the device and submitting crafted input to the CLI. The attacker must be authenticated as an administrative user to execute the affected commands. A successful exploit could allow the attacker to access the underlying operating system with root privileges.

A vulnerability in one of the diagnostic test CLI commands of Cisco IOS XE Software could allow an authenticated, local attacker to execute arbitrary code on an affected device. To exploit this vulnerability, the attacker would need to have valid user credentials at privilege level 15. This vulnerability exists because the affected software permits modification of the run-time memory of an affected device under specific circumstances. An attacker could exploit this vulnerability by authenticating to the affected device and issuing a specific diagnostic test command at the CLI. A successful exploit could trigger a logic error in the code that was designed to restrict run-time memory modifications. The attacker could take advantage of this logic error to overwrite system memory locations and execute arbitrary code on the underlying Linux operating system (OS) of the affected device.

A vulnerability in the dragonite debugger of Cisco IOS XE Software could allow an authenticated, local attacker to escalate from privilege level 15 to root privilege. The vulnerability is due to the presence of development testing and verification scripts that remained on the device. An attacker could exploit this vulnerability by bypassing the consent token mechanism with the residual scripts on the affected device. A successful exploit could allow the attacker to escalate from privilege level 15 to root privilege.

A vulnerability in the CLI command permissions of Cisco IOS and Cisco IOS XE Software could allow an authenticated, local attacker to retrieve the password for Common Industrial Protocol (CIP) and then remotely configure the device as an administrative user. This vulnerability exists because incorrect permissions are associated with the show cip security CLI command. An attacker could exploit this vulnerability by issuing the command to retrieve the password for CIP on an affected device. A successful exploit could allow the attacker to reconfigure the device.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site WebSocket hijacking (CSWSH) attack and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient HTTP protections in the web UI on an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the web UI to follow a crafted link. A successful exploit could allow the attacker to corrupt memory on the affected device, forcing it to reload and causing a DoS condition.

A vulnerability in the software image verification functionality of Cisco IOS XE Software for the Cisco Catalyst 9000 Family of switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. The vulnerability is due to an improper check in the code function that manages the verification of the digital signatures of system image files during the initial boot process. An attacker could exploit this vulnerability by loading unsigned software on an affected device. A successful exploit could allow the attacker to boot a malicious software image or execute unsigned code and bypass the image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated physical access to the device or obtain privileged access to the root shell on the device.

A vulnerability in the DNS application layer gateway (ALG) functionality used by Network Address Translation (NAT) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a logic error that occurs when an affected device inspects certain DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through an affected device that is performing NAT for DNS packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability can be exploited only by traffic that is sent through an affected device via IPv4 packets. The vulnerability cannot be exploited via IPv6 traffic.