A vulnerability in the Simple Network Management Protocol (SNMP) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow the following: An authenticated, remote attacker with low privileges could cause a denial of service (DoS) condition on an affected device that is running Cisco IOS Software or Cisco IOS XE Software. To cause the DoS, the attacker must have the SNMPv2c or earlier read-only community string or valid SNMPv3 user credentials. An authenticated, remote attacker with high privileges could execute code as the root user on an affected device that is running Cisco IOS XE Software. To execute code as the root user, the attacker must have the SNMPv1 or v2c read-only community string or valid SNMPv3 user credentials and administrative or privilege 15 credentials on the affected device. An attacker could exploit this vulnerability by sending a crafted SNMP packet to an affected device over IPv4 or IPv6 networks. This vulnerability is due to a stack overflow condition in the SNMP subsystem of the affected software. A successful exploit could allow a low-privileged attacker to cause the affected system to reload, resulting in a DoS condition, or allow a high-privileged attacker to execute arbitrary code as the root user and obtain full control of the affected system. Note: This vulnerability affects all versions of SNMP.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, local attacker with privilege level 15 to elevate privileges to root on the underlying operating system of an affected device. This vulnerability is due to insufficient input validation when processing specific configuration commands. An attacker could exploit this vulnerability by including crafted input in specific configuration commands. A successful exploit could allow the attacker to elevate privileges to root on the underlying operating system of an affected device. The security impact rating (SIR) of this advisory has been raised to High because an attacker could gain access to the underlying operating system of the affected device and perform potentially undetected actions. Note: The attacker must have privileges to enter configuration mode on the affected device. This is usually referred to as privilege level 15.

A vulnerability in the DHCP Snooping feature of Cisco IOS XE Software on Software-Defined Access (SD-Access) fabric edge nodes could allow an unauthenticated, remote attacker to cause high CPU utilization on an affected device, resulting in a denial of service (DoS) condition that requires a manual reload to recover. This vulnerability is due to improper handling of IPv4 DHCP packets. An attacker could exploit this vulnerability by sending certain IPv4 DHCP packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition that requires a manual reload to recover.

A vulnerability in the HTTP Server feature of Cisco IOS XE Software when the Telephony Service feature is enabled could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to a null pointer dereference when accessing specific URLs. An attacker could exploit this vulnerability by sending crafted HTTP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, causing a DoS condition on the affected device.

A vulnerability in the Resource Reservation Protocol (RSVP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to a buffer overflow when processing crafted RSVP packets. An attacker could exploit this vulnerability by sending RSVP traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an authenticated, remote attacker to inject commands with the privileges of root. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending crafted input to the web UI. A successful exploit could allow the attacker to inject commands to the underlying operating system with root privileges.

A vulnerability in Cisco IOS XE Software for Cisco Catalyst 3650 and Catalyst 3850 Series Switches could allow an unauthenticated, remote attacker to cause an affected device to reload unexpectedly, resulting in a denial of service (DoS) condition. This vulnerability is due to improper resource management when processing traffic that is received on the management interface. An attacker could exploit this vulnerability by sending a high rate of traffic to the management interface. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the Multicast Leaf Recycle Elimination (mLRE) feature of Cisco IOS XE Software for Cisco ASR 1000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to incorrect handling of certain IPv6 multicast packets when they are fanned out more than seven times on an affected device. An attacker could exploit this vulnerability by sending a specific IPv6 multicast or IPv6 multicast VPN (MVPNv6) packet through the affected device. A successful exploit could allow the attacker to cause a reload of the affected device, resulting in a DoS condition.

A vulnerability in the IPv6 DHCP version 6 (DHCPv6) relay and server features of Cisco IOS and IOS XE Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. This vulnerability is due to insufficient validation of data boundaries. An attacker could exploit this vulnerability by sending crafted DHCPv6 messages to an affected device. A successful exploit could allow the attacker to cause the device to reload unexpectedly.

A vulnerability in the implementation of the IPv4 Virtual Fragmentation Reassembly (VFR) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper reassembly of large packets that occurs when VFR is enabled on either a tunnel interface or on a physical interface that is configured with a maximum transmission unit (MTU) greater than 4,615 bytes. An attacker could exploit this vulnerability by sending fragmented packets through a VFR-enabled interface on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the SSH implementation of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to improper handling of resources during an exceptional situation. An attacker could exploit this vulnerability by continuously connecting to an affected device and sending specific SSH requests. A successful exploit could allow the attacker to cause the affected device to reload.

Multiple vulnerabilities in the Cisco IOx application hosting environment on multiple Cisco platforms could allow an attacker to inject arbitrary commands into the underlying host operating system, execute arbitrary code on the underlying host operating system, install applications without being authenticated, or conduct a cross-site scripting (XSS) attack against a user of the affected software. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in Simple Network Management Protocol (SNMP) trap generation for wireless clients of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, adjacent attacker to cause an affected device to unexpectedly reload, resulting in a denial of service (DoS) condition on the device. This vulnerability is due to a lack of input validation of the information used to generate an SNMP trap related to a wireless client connection event. An attacker could exploit this vulnerability by sending an 802.1x packet with crafted parameters during the wireless authentication setup phase of a connection. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the NETCONF over SSH feature of Cisco IOS XE Software could allow a low-privileged, authenticated, remote attacker to cause a denial of service condition (DoS) on an affected device. This vulnerability is due to insufficient resource management. An attacker could exploit this vulnerability by initiating a large number of NETCONF over SSH connections. A successful exploit could allow the attacker to exhaust resources, causing the device to reload and resulting in a DoS condition on an affected device.

A vulnerability in the implementation of the Resource Public Key Infrastructure (RPKI) feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause the Border Gateway Protocol (BGP) process to crash, resulting in a denial of service (DoS) condition. This vulnerability is due to the incorrect handling of a specific RPKI to Router (RTR) Protocol packet header. An attacker could exploit this vulnerability by compromising the RPKI validator server and sending a specifically crafted RTR packet to an affected device. Alternatively, the attacker could use man-in-the-middle techniques to impersonate the RPKI validator server and send a crafted RTR response packet over the established RTR TCP connection to the affected device. A successful exploit could allow the attacker to cause a DoS condition because the BGP process could constantly restart and BGP routing could become unstable.

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) support for the AutoReconnect feature of Cisco IOS Software and Cisco IOS XE Software could allow an authenticated, remote attacker to exhaust the free IP addresses from the assigned local pool. This vulnerability occurs because the code does not release the allocated IP address under certain failure conditions. An attacker could exploit this vulnerability by trying to connect to the device with a non-AnyConnect client. A successful exploit could allow the attacker to exhaust the IP addresses from the assigned local pool, which prevents users from logging in and leads to a denial of service (DoS) condition.

A vulnerability in the TrustSec CLI parser of Cisco IOS and Cisco IOS XE Software could allow an authenticated, remote attacker to cause an affected device to reload. This vulnerability is due to an improper interaction between the web UI and the CLI parser. An attacker could exploit this vulnerability by requesting a particular CLI command to be run through the web UI. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.

A vulnerability in the DECnet Phase IV and DECnet/OSI protocol processing of Cisco IOS XE Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to insufficient input validation of DECnet traffic that is received by an affected device. An attacker could exploit this vulnerability by sending DECnet traffic to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.

Multiple vulnerabilities in the fast reload feature of Cisco IOS XE Software running on Cisco Catalyst 3850, Cisco Catalyst 9300, and Cisco Catalyst 9300L Series Switches could allow an authenticated, local attacker to either execute arbitrary code on the underlying operating system, install and boot a malicious software image, or execute unsigned binaries on an affected device. These vulnerabilities are due to improper checks performed by system boot routines. To exploit these vulnerabilities, the attacker would need privileged access to the CLI of the device. A successful exploit could allow the attacker to either execute arbitrary code on the underlying operating system or execute unsigned code and bypass the image verification check part of the secure boot process. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the web UI feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site WebSocket hijacking (CSWSH) attack and cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient HTTP protections in the web UI on an affected device. An attacker could exploit this vulnerability by persuading an authenticated user of the web UI to follow a crafted link. A successful exploit could allow the attacker to corrupt memory on the affected device, forcing it to reload and causing a DoS condition.

A vulnerability in the software image verification functionality of Cisco IOS XE Software for the Cisco Catalyst 9000 Family of switches could allow an unauthenticated, physical attacker to execute unsigned code at system boot time. The vulnerability is due to an improper check in the code function that manages the verification of the digital signatures of system image files during the initial boot process. An attacker could exploit this vulnerability by loading unsigned software on an affected device. A successful exploit could allow the attacker to boot a malicious software image or execute unsigned code and bypass the image verification check part of the secure boot process of an affected device. To exploit this vulnerability, the attacker would need to have unauthenticated physical access to the device or obtain privileged access to the root shell on the device.

A vulnerability in the DNS application layer gateway (ALG) functionality used by Network Address Translation (NAT) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a logic error that occurs when an affected device inspects certain DNS packets. An attacker could exploit this vulnerability by sending crafted DNS packets through an affected device that is performing NAT for DNS packets. A successful exploit could allow an attacker to cause the device to reload, resulting in a denial of service (DoS) condition on an affected device. The vulnerability can be exploited only by traffic that is sent through an affected device via IPv4 packets. The vulnerability cannot be exploited via IPv6 traffic.

A vulnerability in a diagnostic command for the Plug-and-Play (PnP) subsystem of Cisco IOS XE Software could allow an authenticated, local attacker to elevate privileges to the level of an Administrator user (level 15) on an affected device. The vulnerability is due to insufficient protection of sensitive information. An attacker with low privileges could exploit this vulnerability by issuing the diagnostic CLI show pnp profile when a specific PnP listener is enabled on the device. A successful exploit could allow the attacker to obtain a privileged authentication token. This token can be used to send crafted PnP messages and execute privileged commands on the targeted system.

A vulnerability in Cisco IOS XE Software could allow an authenticated, local attacker to execute persistent code at boot time and break the chain of trust. This vulnerability is due to incorrect validations by boot scripts when specific ROM monitor (ROMMON) variables are set. An attacker could exploit this vulnerability by installing code to a specific directory in the underlying operating system (OS) and setting a specific ROMMON variable. A successful exploit could allow the attacker to execute persistent code on the underlying OS. To exploit this vulnerability, the attacker would need access to the root shell on the device or have physical access to the device.

Multiple vulnerabilities in the web management framework of Cisco IOS XE Software could allow an authenticated, remote attacker with read-only privileges to elevate privileges to the level of an Administrator user on an affected device. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability in the Simple Network Management Protocol (SNMP) implementation in Cisco ASR 920 Series Aggregation Services Router model ASR920-12SZ-IM could allow an authenticated, remote attacker to cause the device to reload. The vulnerability is due to incorrect handling of data that is returned for Cisco Discovery Protocol queries to SNMP. An attacker could exploit this vulnerability by sending a request for Cisco Discovery Protocol information by using SNMP. An exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition.