A vulnerability in task group assignment for a specific CLI command in Cisco IOS XR Software could allow an authenticated, local attacker to elevate privileges and gain full administrative control of an affected device. This vulnerability is due to incorrect mapping of a command to task groups within the source code. An attacker with a low-privileged account could exploit this vulnerability by using the CLI command to bypass the task group–based checks. A successful exploit could allow the attacker to elevate privileges and perform actions on an affected device without authorization checks.
A vulnerability in the Intermediate System-to-Intermediate System (IS-IS) multi-instance routing feature of Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause the IS-IS process to restart unexpectedly. This vulnerability is due to insufficient input validation of ingress IS-IS packets. An attacker could exploit this vulnerability by sending crafted IS-IS packets to an affected device after forming an adjacency. A successful exploit could allow the attacker to cause the IS-IS process to restart unexpectedly, resulting in a temporary loss of connectivity to advertised networks and a denial of service (DoS) condition. Note: The IS-IS protocol is a routing protocol. To exploit this vulnerability, an attacker must be Layer 2-adjacent to the affected device and must have formed an adjacency.
A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root and execute arbitrary commands on the underlying operating system.
A vulnerability in the handling of an Egress Packet Network Interface (EPNI) Aligner interrupt in Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series with NC57 line cards and Cisco NCS 5700 Routers and Cisco IOS XR Software for Third Party Software could allow an
A vulnerability in the web services of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software, Cisco Secure Firewall Threat Defense (FTD) Software, Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, remote attacker (Cisco ASA and FTD Software) or authenticated, remote attacker (Cisco IOS, IOS XE, and IOS XR Software) with low user privileges to execute arbitrary code on an affected device. This vulnerability is due to improper validation of user-supplied input in HTTP requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web service on an affected device after obtaining additional information about the system, overcoming exploit mitigations, or both. A successful exploit could allow the attacker to execute arbitrary code as root, which may lead to the complete compromise of the affected device. For more information about this vulnerability, see the Details ["#details"] section of this advisory.
A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker to bypass Cisco IOS XR image signature verification and load unverified software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device. This vulnerability is due to incomplete validation of files in the boot verification process. An attacker could exploit this vulnerability by manipulating the system configuration options to bypass some of the integrity checks that are performed during the boot process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass the requirement to run Cisco-signed images or alter the security properties of the running system. Note: Because exploitation of this vulnerability could result in the attacker bypassing Cisco image verification, Cisco has raised the Security Impact Rating (SIR) of this advisory from Medium to High.
A vulnerability in the boot process of Cisco IOS XR Software could allow an authenticated, local attacker with high privileges to bypass the Secure Boot functionality and load unverified software on an affected device. To exploit this vulnerability, the attacker must have root-system privileges on the affected device. This vulnerability is due to insufficient verification of modules in the software load process. An attacker could exploit this vulnerability by manipulating the loaded binaries to bypass some of the integrity checks that are performed during the booting process. A successful exploit could allow the attacker to control the boot configuration, which could enable them to bypass the requirement to run Cisco-signed images or alter the security properties of the running system. Note: This vulnerability affects Cisco IOS XR Software, not the Secure Boot feature. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to execute arbitrary commands as root on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root and execute arbitrary commands.
A vulnerability in confederation implementation for the Border Gateway Protocol (BGP) in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to a memory corruption that occurs when a BGP update is created with an ASCONFEDSEQUENCE attribute that has 255 autonomous system numbers (AS numbers). An attacker could exploit this vulnerability by sending a crafted BGP update message, or the network could be designed in such a manner that the ASCONFEDSEQUENCE attribute grows to 255 AS numbers or more. A successful exploit could allow the attacker to cause memory corruption, which may cause the BGP process to restart, resulting in a DoS condition. To exploit this vulnerability, an attacker must control a BGP confederation speaker within the same autonomous system as the victim, or the network must be designed in such a manner that the ASCONFEDSEQUENCE attribute grows to 255 AS numbers or more.
HTTP/2 Rapid reset attack The HTTP/2 protocol allows clients to indicate to the server that a previous stream should be canceled by sending a RSTSTREAM frame. The protocol does not require the client and server to coordinate the cancellation in any way, the client may do it unilaterally. The client may also assume that the cancellation will take effect immediately when the server receives the RSTSTREAM frame, before any other data from that TCP connection is processed.
Abuse of this feature is called a Rapid Reset attack because it relies on the ability for an endpoint to send a RSTSTREAM frame immediately after sending a request frame, which makes the other endpoint start working and then rapidly resets the request. The request is canceled, but leaves the HTTP/2 connection open.
The HTTP/2 Rapid Reset attack built on this capability is simple: The client opens a large number of streams at once as in the standard HTTP/2 attack, but rather than waiting for a response to each request stream from the server or proxy, the client cancels each request immediately.
The ability to reset streams immediately allows each connection to have an indefinite number of requests in flight. By explicitly canceling the requests, the attacker never exceeds the limit on the number of concurrent open streams. The number of in-flight requests is no longer dependent on the round-trip time (RTT), but only on the available network bandwidth.
In a typical HTTP/2 server implementation, the server will still have to do significant amounts of work for canceled requests, such as allocating new stream data structures, parsing the query and doing header decompression, and mapping the URL to a resource. For reverse proxy implementations, the request may be proxied to the backend server before the RSTSTREAM frame is processed. The client on the other hand paid almost no costs for sending the requests. This creates an exploitable cost asymmetry between the server and the client.
Multiple software artifacts implementing HTTP/2 are affected. This advisory was originally ingested from the swift-nio-http2 repo advisory and their original conent follows.
swift-nio-http2 specific advisory swift-nio-http2 is vulnerable to a denial-of-service vulnerability in which a malicious client can create and then reset a large number of HTTP/2 streams in a short period of time. This causes swift-nio-http2 to commit to a large amount of expensive work which it then throws away, including creating entirely new Channels to serve the traffic. This can easily overwhelm an EventLoop and prevent it from making forward progress.
swift-nio-http2 1.28 contains a remediation for this issue that applies reset counter using a sliding window. This constrains the number of stream resets that may occur in a given window of time. Clients violating this limit will have their connections torn down. This allows clients to continue to cancel streams for legitimate reasons, while constraining malicious actors.
A vulnerability in the iPXE boot function of Cisco IOS XR software could allow an authenticated, local attacker to install an unverified software image on an affected device. This vulnerability is due to insufficient image verification. An attacker could exploit this vulnerability by manipulating the boot parameters for image verification during the iPXE boot process on an affected device. A successful exploit could allow the attacker to boot an unverified software image on the affected device.
A vulnerability in Cisco IOS XR Software image verification checks could allow an authenticated, local attacker to execute arbitrary code on the underlying operating system. This vulnerability is due to a time-of-check, time-of-use (TOCTOU) race condition when an install query regarding an ISO image is performed during an install operation that uses an ISO image. An attacker could exploit this vulnerability by modifying an ISO image and then carrying out install requests in parallel. A successful exploit could allow the attacker to execute arbitrary code on an affected device.
Cisco IOS XR software health check opens TCP port 6379 by default on activation. An attacker can connect to the Redis instance on the open port and allow access to the Redis instance that is running within the NOSi container.
Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address these vulnerabilities.
A vulnerability in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to exhaust process memory of an affected device. The vulnerability is due to insufficient queue management for Internet Group Management Protocol (IGMP) packets. An attacker could exploit this vulnerability by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to cause memory exhaustion, resulting in instability of other processes. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco will release software updates that address this vulnerability.
A vulnerability in the IPsec packet processor of Cisco IOS XR Software could allow an unauthenticated remote attacker to cause a denial of service (DoS) condition for IPsec sessions to an affected device. The vulnerability is due to improper handling of packets by the IPsec packet processor. An attacker could exploit this vulnerability by sending malicious ICMP error messages to an affected device that get punted to the IPsec packet processor. A successful exploit could allow the attacker to deplete IPsec memory, resulting in all future IPsec packets to an affected device being dropped by the device. Manual intervention is required to recover from this situation.
A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).
A vulnerability in the Cisco Discovery Protocol implementation for Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability is due to improper validation of string input from certain fields in Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).
A vulnerability in the Secure Shell (SSH) authentication function of Cisco IOS XR Software could allow an authenticated, remote attacker to successfully log in to an affected device using two distinct usernames. The vulnerability is due to a logic error that may occur when certain sequences of actions are processed during an SSH login event on the affected device. An attacker could exploit this vulnerability by initiating an SSH session to the device with a specific sequence that presents the two usernames. A successful exploit could result in logging data misrepresentation, user enumeration, or, in certain circumstances, a command authorization bypass. See the Details section for more information.
Multiple Buffer Overflow vulnerabilities in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device. Cisco Bug IDs: CSCuo17183, CSCvd73487.
Format string vulnerability in the Link Layer Discovery Protocol (LLDP) subsystem of Cisco IOS Software, Cisco IOS XE Software, and Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges on an affected device.
A vulnerability in the forwarding component of Cisco IOS XR Software for Cisco Network Convergence System (NCS) 5500 Series Routers could allow an authenticated, local attacker to cause the router to stop forwarding data traffic across Traffic Engineering (TE) tunnels, resulting in a denial of service (DoS) condition. More Information: CSCvd16665. Known Affected Releases: 6.2.11.BASE. Known Fixed Releases: 6.1.3 6.1.2 6.3.1.8i.BASE 6.2.11.8i.BASE 6.2.2.9i.BASE 6.1.32.11i.BASE 6.1.31.10i.BASE 6.1.4.3i.BASE.
A vulnerability in the Event Management Service daemon (emsd) of Cisco IOS XR routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. The vulnerability is due to improper handling of gRPC requests. An attacker could exploit this vulnerability by repeatedly sending unauthenticated gRPC requests to the affected device. A successful exploit could allow the attacker to crash the device in such a manner that manual intervention is required to recover. This vulnerability affects all Cisco IOS XR platforms that are running release 6.1.1 of Cisco IOS XR Software when the gRPC service is enabled on the device. The gRPC service is not enabled by default. Cisco Bug IDs: CSCvb14441.
A vulnerability in Google-defined remote procedure call (gRPC) handling in Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause the Event Management Service daemon (emsd) to crash due to a system memory leak, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco IOS XR Software with gRPC enabled. More Information: CSCvb14433. Known Affected Releases: 6.1.1.BASE 6.2.1.BASE. Known Fixed Releases: 6.2.1.22i.MGBL 6.1.22.9i.MGBL 6.1.21.12i.MGBL 6.1.2.13i.MGBL.
The server IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.6, IOS XE through 3.18S, IOS XR 4.3.x and 5.0.x through 5.2.x, and PIX before 7.0 allows remote attackers to obtain sensitive information from device memory via a Security Association (SA) negotiation request, aka Bug IDs CSCvb29204 and CSCvb36055 or BENIGNCERTAIN.
Cisco IOS XR 4.3.4 through 5.3.0 on ASR 9000 devices, when uRPF, PBR, QoS, or an ACL is configured, does not properly handle bridge-group virtual interface (BVI) traffic, which allows remote attackers to cause a denial of service (chip and card hangs and reloads) by triggering use of a BVI interface for IPv4 packets, aka Bug ID CSCur62957.
Cisco ASR 9000 devices with software 5.3.0.BASE do not recognize that certain ACL entries have a single-host constraint, which allows remote attackers to bypass intended network-resource access restrictions by using an address that was not supposed to have been allowed, aka Bug ID CSCur28806.
The DHCPv4 server in Cisco IOS XR 5.2.2 on ASR 9000 devices allows remote attackers to cause a denial of service (service outage) via a flood of crafted DHCP packets, aka Bug ID CSCup67822.
Cisco IOS XR allows remote attackers to cause a denial of service (RSVP process reload) via a malformed RSVP packet, aka Bug ID CSCur69192.
The SNMPv2 implementation in Cisco IOS XR allows remote authenticated users to cause a denial of service (snmpd daemon reload) via a malformed SNMP packet, aka Bug ID CSCur25858.