A vulnerability in the TCP flags inspection feature for access control lists (ACLs) on Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, remote attacker to bypass protection offered by a configured ACL on an affected device. The vulnerability is due to incorrect processing of the ACL applied to an interface of an affected device when Cisco Express Forwarding load balancing using the 3-tuple hash algorithm is enabled. An attacker could exploit this vulnerability by sending traffic through an affected device that should otherwise be denied by the configured ACL. An exploit could allow the attacker to bypass protection offered by a configured ACL on the affected device. There are workarounds that address this vulnerability. Affected Cisco IOS XR versions are: Cisco IOS XR Software Release 5.1.1 and later till first fixed. First Fixed Releases: 6.5.2 and later, 6.6.1 and later.

A vulnerability in the access-control logic of the NETCONF over Secure Shell (SSH) of Cisco IOS XR Software may allow connections despite an access control list (ACL) that is configured to deny access to the NETCONF over SSH of an affected device. The vulnerability is due to a missing check in the NETCONF over SSH access control list (ACL). An attacker could exploit this vulnerability by connecting to an affected device using NETCONF over SSH. A successful exploit could allow the attacker to connect to the device on the NETCONF port. Valid credentials are required to access the device. This vulnerability does not affect connections to the default SSH process on the device.

A vulnerability in the implementation of the Intermediate System–to–Intermediate System (IS–IS) routing protocol functionality in Cisco IOS XR Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition in the IS–IS process. The vulnerability is due to improper handling of a Simple Network Management Protocol (SNMP) request for specific Object Identifiers (OIDs) by the IS–IS process. An attacker could exploit this vulnerability by sending a crafted SNMP request to the affected device. A successful exploit could allow the attacker to cause a DoS condition in the IS–IS process.

A vulnerability in the JSON-RPC API feature in Cisco Crosswork Network Services Orchestrator (NSO) and ConfD that is used by the web-based management interfaces of Cisco Optical Site Manager and Cisco RV340 Dual WAN Gigabit VPN Routers could allow an authenticated, remote attacker to modify the configuration of an affected application or device.  This vulnerability is due to improper authorization checks on the API. An attacker with privileges sufficient to access the affected application or device could exploit this vulnerability by sending malicious requests to the JSON-RPC API. A successful exploit could allow the attacker to make unauthorized modifications to the configuration of the affected application or device, including creating new user accounts or elevating their own privileges on an affected system.

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to read any file in the file system of the underlying Linux operating system. The attacker must have valid credentials on the affected device. This vulnerability is due to incorrect validation of the arguments that are passed to a specific CLI command. An attacker could exploit this vulnerability by logging in to an affected device with low-privileged credentials and using the affected command. A successful exploit could allow the attacker access files in read-only mode on the Linux file system.

A vulnerability in the CLI of Cisco IOS XR Software could allow an authenticated, local attacker to obtain read/write file system access on the underlying operating system of an affected device. This vulnerability is due to insufficient validation of user arguments that are passed to specific CLI commands. An attacker with a low-privileged account could exploit this vulnerability by using crafted commands at the prompt. A successful exploit could allow the attacker to elevate privileges to root.

A vulnerability in the SSH Server process of Cisco IOS XR Software could allow an authenticated, remote attacker to overwrite and read arbitrary files on the local device. This vulnerability is due to insufficient input validation of arguments that are supplied by the user for a specific file transfer method. An attacker with lower-level privileges could exploit this vulnerability by specifying Secure Copy Protocol (SCP) parameters when authenticating to a device. A successful exploit could allow the attacker to elevate their privileges and retrieve and upload files on a device that they should not have access to. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxr-scp-inject-QwZOCv2 This advisory is part of the September 2021 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2021 Cisco IOS XR Software Security Advisory Bundled Publication.

A vulnerability in the IP Service Level Agreements (IP SLA) responder and Two-Way Active Measurement Protocol (TWAMP) features of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause device packet memory to become exhausted or cause the IP SLA process to crash, resulting in a denial of service (DoS) condition. This vulnerability exists because socket creation failures are mishandled during the IP SLA and TWAMP processes. An attacker could exploit this vulnerability by sending specific IP SLA or TWAMP packets to an affected device. A successful exploit could allow the attacker to exhaust the packet memory, which will impact other processes, such as routing protocols, or crash the IP SLA process. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ipsla-ZA3SRrpP This advisory is part of the September 2021 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2021 Cisco IOS XR Software Security Advisory Bundled Publication.

A vulnerability in the Layer 2 punt code of Cisco IOS XR Software running on Cisco ASR 9000 Series Aggregation Services Routers could allow an unauthenticated, adjacent attacker to cause the affected line card to reboot. This vulnerability is due to incorrect handling of specific Ethernet frames that cause a spin loop that can make the network processors unresponsive. An attacker could exploit this vulnerability by sending specific types of Ethernet frames on the segment where the affected line cards are attached. A successful exploit could allow the attacker to cause the affected line card to reboot. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-npspin-QYpwdhFD This advisory is part of the September 2021 release of the Cisco IOS XR Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: September 2021 Cisco IOS XR Software Security Advisory Bundled Publication.

A vulnerability in the egress packet processing function of Cisco IOS XR Software for Cisco ASR 9000 Series Aggregation Services Routers and Cisco Network Convergence System (NCS) 5000 Series Routers could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper resource allocation when an affected device processes network traffic in software switching mode. An attacker could exploit this vulnerability by sending specific streams of Layer 2 or Layer 3 protocol data units (PDUs) to an affected device. A successful exploit could cause the affected device to run out of buffer resources, which could make the device unable to process or forward traffic, resulting in a DoS condition. The device would need to be restarted to regain functionality. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-xr-cp-dos-ej8VB9QY

Multiple vulnerabilities in the Distance Vector Multicast Routing Protocol (DVMRP) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to either immediately crash the Internet Group Management Protocol (IGMP) process or make it consume available memory and eventually crash. The memory consumption may negatively impact other processes that are running on the device. These vulnerabilities are due to the incorrect handling of IGMP packets. An attacker could exploit these vulnerabilities by sending crafted IGMP traffic to an affected device. A successful exploit could allow the attacker to immediately crash the IGMP process or cause memory exhaustion, resulting in other processes becoming unstable. These processes may include, but are not limited to, interior and exterior routing protocols. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. There are multiple mitigations available to customers depending on their needs. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-iosxr-dvmrp-memexh-dSmpdvfz

A vulnerability in the Border Gateway Protocol (BGP) additional paths feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to prevent authorized users from monitoring the BGP status and cause the BGP process to stop processing new updates, resulting in a denial of service (DOS) condition. The vulnerability is due to an incorrect calculation of lexicographical order when displaying additional path information within Cisco IOS XR Software, which causes an infinite loop. An attacker could exploit this vulnerability by sending a specific BGP update from a BGP neighbor peer session of an affected device; an authorized user must then issue a show bgp command for the vulnerability to be exploited. A successful exploit could allow the attacker to prevent authorized users from properly monitoring the BGP status and prevent BGP from processing new updates, resulting in outdated information in the routing and forwarding tables. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-bgp-ErKEqAer

A vulnerability in the Cisco Discovery Protocol implementation for Cisco IOS XR Software could allow an unauthenticated, adjacent attacker to execute arbitrary code or cause a reload on an affected device. The vulnerability is due to improper validation of string input from certain fields in Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to cause a stack overflow, which could allow the attacker to execute arbitrary code with administrative privileges on an affected device. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-iosxr-cdp-rce

A vulnerability in the Cisco Discovery Protocol implementation for Cisco FXOS Software, Cisco IOS XR Software, and Cisco NX-OS Software could allow an unauthenticated, adjacent attacker to cause a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing check when the affected software processes Cisco Discovery Protocol messages. An attacker could exploit this vulnerability by sending a malicious Cisco Discovery Protocol packet to an affected device. A successful exploit could allow the attacker to exhaust system memory, causing the device to reload. Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit this vulnerability, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).

Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200205-fxnxos-iosxr-cdp-dos

A vulnerability in the implementation of the Intermediate System-to-Intermediate System (IS-IS) routing protocol functionality in Cisco IOS XR Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition in the IS-IS process. The vulnerability is due to improper handling of a Simple Network Management Protocol (SNMP) request for specific Object Identifiers (OIDs) by the IS-IS process. An attacker could exploit this vulnerability by sending a crafted SNMP request to the affected device. A successful exploit could allow the attacker to cause a DoS condition in the IS-IS process. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20200122-ios-xr-dos

A vulnerability in the implementation of Intermediate System-to-Intermediate System (IS-IS) routing protocol functionality in Cisco IOS XR Software could allow an unauthenticated attacker who is in the same IS-IS area to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of IS-IS link-state protocol data units (PDUs). An attacker could exploit this vulnerability by sending specific link-state PDUs to an affected system to be processed. A successful exploit could allow the attacker to cause incorrect calculations used in the weighted remote shared risk link groups (SRLG) or in the IGP Flexible Algorithm. It could also cause tracebacks to the logs or potentially cause the receiving device to crash the IS-IS process, resulting in a DoS condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190807-iosxr-isis-dos-1918 A companion advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190807-iosxr-isis-dos-1910

A vulnerability in the implementation of the Intermediate System-to-Intermediate System (IS-IS) routing protocol functionality in Cisco IOS XR Software could allow an unauthenticated attacker who is in the same IS-IS area to cause a denial of service (DoS) condition. The vulnerability is due to incorrect processing of crafted IS-IS link-state protocol data units (PDUs). An attacker could exploit this vulnerability by sending a crafted link-state PDU to an affected system to be processed. A successful exploit could allow the attacker to cause all routers within the IS-IS area to unexpectedly restart the IS-IS process, resulting in a DoS condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.

This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190807-iosxr-isis-dos-1910