A vulnerability in the Internet Key Exchange Version 2 (IKEv2) module of Cisco IOS 15.0 through 15.6 and Cisco IOS XE 3.5 through 16.5 could allow an unauthenticated, remote attacker to cause high CPU utilization, traceback messages, or a reload of an affected device that leads to a denial of service (DoS) condition. The vulnerability is due to how an affected device processes certain IKEv2 packets. An attacker could exploit this vulnerability by sending specific IKEv2 packets to an affected device to be processed. A successful exploit could allow the attacker to cause high CPU utilization, traceback messages, or a reload of the affected device that leads to a DoS condition. This vulnerability affects Cisco devices that have the Internet Security Association and Key Management Protocol (ISAKMP) enabled. Although only IKEv2 packets can be used to trigger this vulnerability, devices that are running Cisco IOS Software or Cisco IOS XE Software are vulnerable when ISAKMP is enabled. A device does not need to be configured with any IKEv2-specific features to be vulnerable. Many features use IKEv2, including different types of VPNs such as the following: LAN-to-LAN VPN; Remote-access VPN, excluding SSL VPN; Dynamic Multipoint VPN (DMVPN); and FlexVPN. Cisco Bug IDs: CSCvc41277.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve57697.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve89865, CSCsy56638.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66601.

A vulnerability in the SNMP implementation of could allow an authenticated, remote attacker to cause a reload of the affected system or to remotely execute code. An attacker could exploit this vulnerability by sending a crafted SNMP packet to the affected device.  The vulnerability is due to a buffer overflow in the affected code area. The vulnerability affects all versions of SNMP (versions 1, 2c, and 3). The attacker must know the SNMP read only community string (SNMP version 2c or earlier) or the user credentials (SNMPv3). An exploit could allow the attacker to execute arbitrary code and obtain full control of the system or to cause a reload of the affected system. Only traffic directed to the affected system can be used to exploit this vulnerability.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve60376, CSCve78027.

A vulnerability in the DHCP client implementation of Cisco IOS (12.2, 12.4, and 15.0 through 15.6) and Cisco IOS XE (3.3 through 3.7) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. The vulnerability occurs during the parsing of a crafted DHCP packet. An attacker could exploit this vulnerability by sending crafted DHCP packets to an affected device that is configured as a DHCP client. A successful exploit could allow the attacker to cause a reload of an affected device, resulting in a DoS condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or IOS XE Software and using a specific DHCP client configuration. Cisco Bug IDs: CSCuu43892.

A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.

The AAA service in Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.1 through 3.18 and 16.2 allows remote attackers to cause a denial of service (device reload) via a failed SSH connection attempt that is mishandled during generation of an error-log message, aka Bug ID CSCuy87667.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.6 and IOS XE 3.1 through 3.17 and 16.2 allow remote attackers to cause a denial of service (device reload) via crafted fields in an H.323 message, aka Bug ID CSCux04257.

The server IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.6, IOS XE through 3.18S, IOS XR 4.3.x and 5.0.x through 5.2.x, and PIX before 7.0 allows remote attackers to obtain sensitive information from device memory via a Security Association (SA) negotiation request, aka Bug IDs CSCvb29204 and CSCvb36055 or BENIGNCERTAIN.

The Service Discovery Gateway (aka mDNS Gateway) in Cisco IOS 12.2, 12.4, 15.0, 15.1, 15.2, 15.3, and 15.4 and IOS XE 3.9.xS and 3.10.xS before 3.10.4S, 3.11.xS before 3.11.3S, 3.12.xS before 3.12.2S, and 3.13.xS before 3.13.1S allows remote attackers to cause a denial of service (device reload) by sending malformed mDNS UDP packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCup70579.

Cisco IOS 12.2, 12.4, 15.0, 15.1, 15.2, 15.3, and 15.4 and IOS XE 2.5.x, 2.6.x, 3.1.xS through 3.12.xS before 3.12.3S, 3.2.xE through 3.7.xE before 3.7.1E, 3.3.xSG, 3.4.xSG, and 3.13.xS before 3.13.2S allow remote attackers to cause a denial of service (device reload) by sending malformed IKEv2 packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCum36951.

Memory leak in the TCP input module in Cisco IOS 12.2, 12.4, 15.0, 15.2, 15.3, and 15.4 and IOS XE 3.3.xXO, 3.5.xE, 3.6.xE, 3.8.xS through 3.10.xS before 3.10.5S, and 3.11.xS and 3.12.xS before 3.12.3S allows remote attackers to cause a denial of service (memory consumption or device reload) by sending crafted TCP packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCum94811.

Cisco IOS 12.2, 12.4, 15.0, 15.1, 15.2, 15.3, and 15.4 and IOS XE 2.5.x, 2.6.x, 3.1.xS through 3.12.xS before 3.12.3S, 3.2.xE through 3.7.xE before 3.7.1E, 3.3.xSG, 3.4.xSG, and 3.13.xS before 3.13.2S allow remote attackers to cause a denial of service (memory consumption and device reload) by sending malformed IKEv2 packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCuo75572.

Cisco IOS 12.0, 12.2, 12.4, 15.0, 15.1, 15.2, and 15.3 and IOS XE 2.x and 3.x before 3.7.4S; 3.2.xSE and 3.3.xSE before 3.3.2SE; 3.3.xSG and 3.4.xSG before 3.4.4SG; and 3.8.xS, 3.9.xS, and 3.10.xS before 3.10.1S allow remote attackers to cause a denial of service (device reload) via malformed RSVP packets, aka Bug ID CSCui11547.

Memory leak in Cisco IOS 15.0, 15.1, 15.2, and 15.4 and IOS XE 3.3.xSE before 3.3.2SE, 3.3.xXO before 3.3.1XO, 3.5.xE before 3.5.2E, and 3.11.xS before 3.11.1S allows remote attackers to cause a denial of service (memory consumption, and interface queue wedge or device reload) via malformed mDNS packets, aka Bug ID CSCuj58950.

Cisco IOS 15.0, 15.1, 15.2, and 15.4 and IOS XE 3.3.xSE before 3.3.2SE, 3.3.xXO before 3.3.1XO, 3.5.xE before 3.5.2E, and 3.11.xS before 3.11.1S allow remote attackers to cause a denial of service (device reload) via malformed mDNS packets, aka Bug ID CSCul90866.

The ALG module in Cisco IOS 15.0 through 15.4 does not properly implement SIP over NAT, which allows remote attackers to cause a denial of service (device reload) via multipart SDP IPv4 traffic, aka Bug ID CSCun54071.

The EnergyWise module in Cisco IOS 12.2, 15.0, 15.1, 15.2, and 15.4 and IOS XE 3.2.xXO, 3.3.xSG, 3.4.xSG, and 3.5.xE before 3.5.3E allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 packet, aka Bug ID CSCup52101.

The Application Layer Gateway (ALG) module in Cisco IOS 12.2 through 12.4 and 15.0 through 15.4, when NAT is used, allows remote attackers to cause a denial of service (device reload) via crafted DNS packets, aka Bug ID CSCue00996.

Cisco IOS 12.2 and 15.0 through 15.3, when used with the Kailash FPGA before 2.6 on RSP720-3C-10GE and RSP720-3CXL-10GE devices, allows remote attackers to cause a denial of service (route switch processor outage) via crafted IP packets, aka Bug ID CSCug84789.

The TCP Input module in Cisco IOS 12.2 through 12.4 and 15.0 through 15.4, when NAT is used, allows remote attackers to cause a denial of service (memory consumption or device reload) via crafted TCP packets, aka Bug IDs CSCuh33843 and CSCuj41494.

Cisco IOS 12.2 and 15.0 through 15.3 and IOS XE 3.2 through 3.7 before 3.7.5S and 3.8 through 3.10 before 3.10.1S allow remote attackers to cause a denial of service (device reload) via a malformed IKEv2 packet, aka Bug ID CSCui88426.

The T1/E1 driver-queue functionality in Cisco IOS 12.2 and 15.0 through 15.3, when an HDLC32 driver is used, allows remote attackers to cause a denial of service (interface queue wedge) via bursty network traffic, aka Bug ID CSCub67465.

Cisco IOS 15.0 through 15.3 and IOS XE 3.2 through 3.8, when a VRF interface exists, allows remote attackers to cause a denial of service (interface queue wedge) via crafted UDP RSVP packets, aka Bug ID CSCuf17023.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.3, and IOS XE 2.1 through 3.9, allows remote attackers to cause a denial of service (device reload) via crafted DHCP packets that are processed locally by a (1) server or (2) relay agent, aka Bug ID CSCug31561.

The DNS-over-TCP implementation in Cisco IOS 12.2 and 15.0 through 15.3, when NAT is used, allows remote attackers to cause a denial of service (device reload) via a crafted IPv4 DNS TCP stream, aka Bug ID CSCuf28733.