A buffer overflow vulnerability in the Simple Network Management Protocol (SNMP) code of Cisco ASA software could allow an attacker to cause a reload of the affected system or to remotely execute code.
Cisco PIX 500 and ASA 5500 Series Security Appliances 7.0 before 7.0(4.14) and 7.1 before 7.1(2.1), and the FWSM 2.x before 2.3(4.12) and 3.x before 3.1(3.24), when "inspect http" is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed HTTP traffic.
Cisco PIX 500 and ASA 5500 Series Security Appliances 6.x before 6.3(5.115), 7.0 before 7.0(5.2), and 7.1 before 7.1(2.5), and the FWSM 3.x before 3.1(3.24), when the "inspect sip" option is enabled, allows remote attackers to cause a denial of service (device reboot) via malformed SIP packets.
Unspecified vulnerability in Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to use the LOCAL authentication method, allows remote authenticated users to gain privileges via unspecified vectors.
Cisco PIX 500 and ASA 5500 Series Security Appliances 7.2.2, when configured to inspect certain TCP-based protocols, allows remote attackers to cause a denial of service (device reboot) via malformed TCP packets.
Cisco PIX 500 Series Security Appliances and ASA 5500 Series Adaptive Security Appliances, when running 7.0(x) up to 7.0(5) and 7.1(x) up to 7.1(2.4), and Firewall Services Module (FWSM) 3.1(x) up to 3.1(1.6), causes the EXEC password, local user passwords, and the enable password to be changed to a "non-random value" under certain circumstances, which causes administrators to be locked out and might allow attackers to gain access.
DISPUTED Unspecified vulnerability in Cisco PIX 500 Series Security Appliances allows remote attackers to send arbitrary UDP packets to intranet devices via unspecified vectors involving Session Initiation Protocol (SIP) fixup commands, a different issue than CVE-2006-4032. NOTE: the vendor, after working with the researcher, has been unable to reproduce the issue.
Internet Key Exchange (IKE) version 1 protocol, as implemented on Cisco IOS, VPN 3000 Concentrators, and PIX firewalls, allows remote attackers to cause a denial of service (resource exhaustion) via a flood of IKE Phase-1 packets that exceed the session expiration rate. NOTE: it has been argued that this is due to a design weakness of the IKE version 1 protocol, in which case other vendors and implementations would also be affected.
Cisco PIX/ASA 7.1.x before 7.1(2) and 7.0.x before 7.0(5), PIX 6.3.x before 6.3.5(112), and FWSM 2.3.x before 2.3(4) and 3.x before 3.1(7), when used with Websense/N2H2, allows remote attackers to bypass HTTP access restrictions by splitting the GET method of an HTTP request into multiple packets, which prevents the request from being sent to Websense for inspection, aka bugs CSCsc67612, CSCsc68472, and CSCsd81734.
The Downloadable RADIUS ACLs feature in Cisco PIX and VPN 3000 concentrators, when creating an ACL on the Cisco Secure Access Control Server (CS ACS), generates a random internal name for an ACL that is also used as a hidden user name and password, which allows remote attackers to gain privileges by sniffing the username from the cleartext portion of a RADIUS session, then using the password to log in to another device that uses CS ACS.
Multiple unspecified vulnerabilities in the Internet Key Exchange version 1 (IKEv1) implementation in multiple Cisco products allow remote attackers to cause a denial of service (device reset) via certain malformed IKE packets, as demonstrated by the PROTOS ISAKMP Test Suite for IKEv1. NOTE: due to the lack of details in the Cisco advisory, it is unclear which of CVE-2005-3666, CVE-2005-3667, and/or CVE-2005-3668 this issue applies to.
The SSL/TLS handshaking code in OpenSSL 0.9.7a, 0.9.7b, and 0.9.7c, when using Kerberos ciphersuites, does not properly check the length of Kerberos tickets during a handshake, which allows remote attackers to cause a denial of service (crash) via a crafted SSL/TLS handshake that causes an out-of-bounds read.
The dochangecipherspec function in OpenSSL 0.9.6c to 0.9.6k, and 0.9.7a to 0.9.7c, allows remote attackers to cause a denial of service (crash) via a crafted SSL/TLS handshake that triggers a null dereference.
OpenSSL 0.9.6 before 0.9.6d does not properly handle unknown message types, which allows remote attackers to cause a denial of service (infinite loop), as demonstrated using the Codenomicon TLS Test Tool.
The Session Initiation Protocol (SIP) implementation in multiple Cisco products including IP Phone models 7940 and 7960, IOS versions in the 12.2 train, and Secure PIX 5.2.9 to 6.2.2 allows remote attackers to cause a denial of service and possibly execute arbitrary code via crafted INVITE messages, as demonstrated by the OUSPG PROTOS c07-sip test suite.
Cisco PIX firewall 6.2.x through 6.2.3, when configured as a VPN Client, allows remote attackers to cause a denial of service (dropped IPSec tunnel connection) via an IKE Phase I negotiation request to the outside interface of the firewall.
Cisco PIX firewall 5.x.x, and 6.3.1 and earlier, allows remote attackers to cause a denial of service (crash and reload) via an SNMPv3 message when snmp-server is set.
OpenSSL 0.9.6k allows remote attackers to cause a denial of service (crash via large recursion) via malformed ASN.1 sequences.
Cisco PIX Firewall 6.0.3 and earlier, and 6.1.x to 6.1.3, do not delete the duplicate ISAKMP SAs for a user's VPN session, which allows local users to hijack a session via a man-in-the-middle attack.
Buffer overflow in Cisco PIX Firewall 5.2.x to 5.2.8, 6.0.x to 6.0.3, 6.1.x to 6.1.3, and 6.2.x to 6.2.1 allows remote attackers to cause a denial of service via HTTP traffic authentication using (1) TACACS+ or (2) RADIUS.
Cisco IOS 12.0 through 12.2, when supporting SSH, allows remote attackers to cause a denial of service (CPU consumption) via a large packet that was designed to exploit the SSH CRC32 attack detection overflow (CVE-2001-0144).
The mailguard feature in Cisco Secure PIX Firewall 5.2(2) and earlier does not properly restrict access to SMTP commands, which allows remote attackers to execute restricted commands by sending a DATA command before sending the restricted commands.
Cisco Secure PIX Firewall 5.2(2) allows remote attackers to determine the real IP address of a target FTP server by flooding the server with PASV requests, which includes the real IP address in the response when passive mode is established.
Check Point Firewall-1 allows remote attackers to bypass port access restrictions on an FTP server by forcing it to send malicious packets that Firewall-1 misinterprets as a valid 227 response to a client's PASV attempt.
Cisco PIX firewall manager (PFM) on Windows NT allows attackers to connect to port 8080 on the PFM server and retrieve any file whose name and location is known.
Cisco PIX firewall and CBAC IP fragmentation attack results in a denial of service.