On November 1, 2022, the OpenSSL Project announced the following vulnerabilities: For a description of these vulnerabilities, see OpenSSL Security Advisory [Nov 1 2022]. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-openssl-W9sdCc2a

On September 27, 2022, the following vulnerabilities affecting Cisco products were disclosed by Cert/CC as part of VU855201, titled L2 network security controls can be bypassed using VLAN 0 stacking and/or 802.3 headers: Exploitation of these vulnerabilities could allow an adjacent attacker to bypass configured first-hop security (FHS) features on the affected Cisco products. For more information about these vulnerabilities, see the Details section of this advisory. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-VU855201-J3z8CKTX

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an unauthenticated, remote attacker to execute arbitrary code or cause a denial of service (DoS) condition on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sb-mult-vuln-CbVp4SUR

Multiple vulnerabilities in Cisco Small Business RV160, RV260, RV340, and RV345 Series Routers could allow an attacker to do any of the following: For more information about these vulnerabilities, see the Details section of this advisory. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-smb-mult-vuln-KA9PK6D

A vulnerability in the information storage architecture of several Cisco IP Phone models could allow an unauthenticated, physical attacker to obtain confidential information from an affected device. This vulnerability is due to unencrypted storage of confidential information on an affected device. An attacker could exploit this vulnerability by physically extracting and accessing one of the flash memory chips. A successful exploit could allow the attacker to obtain confidential information from the device, which could be used for subsequent attacks. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ip-phone-info-disc-fRdJfOxA

A vulnerability in the web-based management interface of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), and Cisco Unity Connection could allow an authenticated, remote attacker to access sensitive data on an affected device. This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by sending a crafted HTTP request that contains directory traversal character sequences to an affected system. A successful exploit could allow the attacker to access sensitive files on the affected system. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cucm-path-trav-dKCvktvO

Multiple vulnerabilities exist in the Link Layer Discovery Protocol (LLDP) implementation for Cisco Small Business 220 Series Smart Switches. An unauthenticated, adjacent attacker could perform the following: For more information about these vulnerabilities, see the Details section of this advisory. Note: LLDP is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent). Cisco has released firmware updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sb220-lldp-multivuls-mVRUtQ8T

On August 17, 2021, BlackBerry released a security advisory, QNX-2021-001, that disclosed an integer overflow vulnerability in the following BlackBerry software releases: A successful exploit could allow an attacker to execute arbitrary code or cause a denial of service (DoS). For a description of this vulnerability, see QNX-2021-001. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-qnx-TOxjVPdL

A vulnerability in the restricted shell of Cisco Evolved Programmable Network (EPN) Manager, Cisco Identity Services Engine (ISE), and Cisco Prime Infrastructure could allow an authenticated, local attacker to identify directories and write arbitrary files to the file system. This vulnerability is due to improper validation of parameters that are sent to a CLI command within the restricted shell. An attacker could exploit this vulnerability by logging in to the device and issuing certain CLI commands. A successful exploit could allow the attacker to identify file directories on the affected device and write arbitrary files to the file system on the affected device. To exploit this vulnerability, the attacker must be an authenticated shell user. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ade-xcvAQEOZ

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to perform command injection attacks against an affected device. These vulnerabilities are due to improper validation of user-supplied input. An attacker could exploit these vulnerabilities by sending crafted HTTP requests to the web-based management interface of an affected system. A successful exploit could allow the attacker to execute arbitrary commands with root privileges on the device. To exploit these vulnerabilities, the attacker must have valid administrative credentials for the device. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sb-wap-inject-Mp9FSdG

On May 11, 2021, the research paper Fragment and Forge: Breaking Wi-Fi Through Frame Aggregation and Fragmentation was made public. This paper discusses 12 vulnerabilities in the 802.11 standard. One vulnerability is in the frame aggregation functionality, two vulnerabilities are in the frame fragmentation functionality, and the other nine are implementation vulnerabilities. These vulnerabilities could allow an attacker to forge encrypted frames, which could in turn enable the exfiltration of sensitive data from a targeted device. This advisory will be updated as additional information becomes available. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-wifi-faf-22epcEWu

Multiple vulnerabilities in the web-based management interface of certain Cisco Small Business 100, 300, and 500 Series Wireless Access Points could allow an authenticated, remote attacker to obtain sensitive information from or inject arbitrary commands on an affected device. For more information about these vulnerabilities, see the Details section of this advisory. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-sb-wap-multi-ZAfKGXhF

A vulnerability in the dynamic link library (DLL) loading mechanism in Cisco Advanced Malware Protection (AMP) for Endpoints Windows Connector, ClamAV for Windows, and Immunet could allow an authenticated, local attacker to perform a DLL hijacking attack on an affected Windows system. To exploit this vulnerability, the attacker would need valid credentials on the system. The vulnerability is due to insufficient validation of directory search paths at run time. An attacker could exploit this vulnerability by placing a malicious DLL file on an affected system. A successful exploit could allow the attacker to execute arbitrary code with SYSTEM privileges. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-amp-imm-dll-tu79hvkO

Multiple vulnerabilities in the web-based management interface of Cisco Unified Communications Manager (Unified CM), Cisco Unified Communications Manager IM & Presence Service (Unified CM IM&P), Cisco Unified Communications Manager Session Management Edition (Unified CM SME), and Cisco Unity Connection could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against an interface user. These vulnerabilities exist because the web-based management interface does not properly validate user-supplied input. An attacker could exploit these vulnerabilities by persuading an interface user to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive browser-based information. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cucm-xss-Q4PZcNzJ

On March 25, 2021, the OpenSSL Project released a security advisory, OpenSSL Security Advisory [25 March 2021], that disclosed two vulnerabilities. Exploitation of these vulnerabilities could allow an attacker to use a valid non-certificate authority (CA) certificate to act as a CA and sign a certificate for an arbitrary organization, user or device, or to cause a denial of service (DoS) condition. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-openssl-2021-GHY28dJd

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Series Routers could allow an authenticated, remote attacker to inject arbitrary shell commands that are executed by an affected device. The vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by sending a crafted request to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary shell commands or scripts with root privileges on the affected device. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-cmd-shell-injection-9jOQn9Dy

A vulnerability in the web-based management interface of Cisco Small Business RV110W, RV130, RV130W, and RV215W Routers could allow an unauthenticated, remote attacker to execute arbitrary code on an affected device. The vulnerability is due to improper validation of user-supplied input in the web-based management interface. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted device. A successful exploit could allow the attacker to execute arbitrary code as the root user on the underlying operating system of the affected device. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-rv-rce-AQKREqp

A vulnerability in the Simple Network Management Protocol (SNMP) input packet processor of Cisco Small Business Sx200, Sx300, Sx500, ESW2 Series Managed Switches and Small Business Sx250, Sx350, Sx550 Series Switches could allow an authenticated, remote attacker to cause the SNMP application of an affected device to cease processing traffic, resulting in the CPU utilization reaching one hundred percent. Manual intervention may be required before a device resumes normal operations.

The vulnerability is due to improper validation of SNMP protocol data units (PDUs) in SNMP packets. An attacker could exploit this vulnerability by sending a malicious SNMP packet to an affected device. A successful exploit could allow the attacker to cause the device to cease forwarding traffic, which could result in a denial of service (DoS) condition. Cisco has released firmware updates that address this vulnerability. There are no workarounds that address this vulnerability.

This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20190515-sb-snmpdos