Remote code execution can occur in Asterisk Open Source 13.x before 13.14.1 and 14.x before 14.3.1 and Certified Asterisk 13.13 before 13.13-cert3 because of a buffer overflow in a CDR user field, related to X-ClientCode in chansip, the CDR dialplan function, and the AMI Monitor action.
A respjsipsession crash was discovered in Asterisk Open Source 13.x before 13.37.1, 16.x before 16.14.1, 17.x before 17.8.1, and 18.x before 18.0.1. and Certified Asterisk before 16.8-cert5. Upon receiving a new SIP Invite, Asterisk did not return the created dialog locked or referenced. This caused a gap between the creation of the dialog object, and its next use by the thread that created it. Depending on some off-nominal circumstances and timing, it was possible for another thread to free said dialog in this gap. Asterisk could then crash when the dialog object, or any of its dependent objects, were dereferenced or accessed next by the initial-creation thread. Note, however, that this crash can only occur when using a connection-oriented protocol (e.g., TCP or TLS, but not UDP) for SIP transport. Also, the remote client must be authenticated, or Asterisk must be configured for anonymous calling.
The IAX2 channel driver (chaniax2) in Asterisk Open 1.2.x before 1.2.23, 1.4.x before 1.4.9, and Asterisk Appliance Developer Kit before 0.6.0, when configured to allow unauthenticated calls, allows remote attackers to cause a denial of service (resource exhaustion) via a flood of calls that do not complete a 3-way handshake, which causes an astchannel to be allocated but not released.
The FWDOWNL firmware-download implementation in Asterisk Open Source 1.0.x, 1.2.x before 1.2.30, and 1.4.x before 1.4.21.2; Business Edition A.x.x, B.x.x before B.2.5.4, and C.x.x before C.1.10.3; AsteriskNOW; Appliance Developer Kit 0.x.x; and s800i 1.0.x before 1.2.0.1 allows remote attackers to cause a denial of service (traffic amplification) via an IAX2 FWDOWNL request.
The IAX2 channel driver (chaniax2) in Asterisk 1.2 before revision 72630 and 1.4 before revision 65679, when configured to allow unauthenticated calls, sends "early audio" to an unverified source IP address of a NEW message, which allows remote attackers to cause a denial of service (traffic amplification) via a spoofed NEW message.
The IAX2 channel driver (chaniax2) in Asterisk Open Source 1.0.x, 1.2.x before 1.2.28, and 1.4.x before 1.4.19.1; Business Edition A.x.x, B.x.x before B.2.5.2, and C.x.x before C.1.8.1; AsteriskNOW before 1.0.3; Appliance Developer Kit 0.x.x; and s800i before 1.1.0.3, when configured to allow unauthenticated calls, does not verify that an ACK response contains a call number matching the server's reply to a NEW message, which allows remote attackers to cause a denial of service (traffic amplification) via a spoofed ACK response that does not complete a 3-way handshake. NOTE: this issue exists because of an incomplete fix for CVE-2008-1923.
The AsteriskGUI HTTP server in Asterisk Open Source 1.4.x before 1.4.19-rc3 and 1.6.x before 1.6.0-beta6, Business Edition C.x.x before C.1.6, AsteriskNOW before 1.0.2, Appliance Developer Kit before revision 104704, and s800i 1.0.x before 1.1.0.2 generates insufficiently random manager ID values, which makes it easier for remote attackers to hijack a manager session via a series of ID guesses.
Unspecified vulnerability in Asterisk Open Source 1.2.x before 1.2.27, 1.4.x before 1.4.18.1 and 1.4.19-rc3; Business Edition A.x.x, B.x.x before B.2.5.1, and C.x.x before C.1.6.2; AsteriskNOW 1.0.x before 1.0.2; Appliance Developer Kit before 1.4 revision 109393; and s800i 1.0.x before 1.1.0.2; allows remote attackers to access the SIP channel driver via a crafted From header.
Multiple buffer overflows in Asterisk Open Source 1.4.x before 1.4.18.1 and 1.4.19-rc3, Open Source 1.6.x before 1.6.0-beta6, Business Edition C.x.x before C.1.6.1, AsteriskNOW 1.0.x before 1.0.2, Appliance Developer Kit before 1.4 revision 109386, and s800i 1.1.x before 1.1.0.2 allow remote attackers to (1) write a zero to an arbitrary memory location via a large RTP payload number, related to the astrtpunsetmtype function in main/rtp.c; or (2) write certain integers to an arbitrary memory location via a large number of RTP payloads, related to the processsdp function in channels/chansip.c.
The SIP channel driver in Asterisk Open Source 1.4.x before 1.4.17, Business Edition before C.1.0-beta8, AsteriskNOW before beta7, Appliance Developer Kit before Asterisk 1.4 revision 95946, and Appliance s800i 1.0.x before 1.0.3.4 allows remote attackers to cause a denial of service (daemon crash) via a BYE message with an Also (Also transfer) header, which triggers a NULL pointer dereference.
Multiple stack consumption vulnerabilities in Asterisk Open Source 1.8.x before 1.8.19.1, 10.x before 10.11.1, and 11.x before 11.1.2; Certified Asterisk 1.8.11 before 1.8.11-cert10; and Asterisk Digiumphones 10.x-digiumphones before 10.11.1-digiumphones allow remote attackers to cause a denial of service (daemon crash) via TCP data using the (1) SIP, (2) HTTP, or (3) XMPP protocol.
Asterisk Open Source 1.8.x before 1.8.19.1, 10.x before 10.11.1, and 11.x before 11.1.2; Certified Asterisk 1.8.11 before 1.8.11-cert10; and Asterisk Digiumphones 10.x-digiumphones before 10.11.1-digiumphones, when anonymous calls are enabled, allow remote attackers to cause a denial of service (resource consumption) by making anonymous calls from multiple sources and consequently adding many entries to the device state cache.
channels/chaniax2.c in Asterisk Open Source 1.8.x before 1.8.15.1 and 10.x before 10.7.1, Certified Asterisk 1.8.11 before 1.8.11-cert7, Asterisk Digiumphones 10.x.x-digiumphones before 10.7.1-digiumphones, and Asterisk Business Edition C.3.x before C.3.7.6 does not enforce ACL rules during certain uses of peer credentials, which allows remote authenticated users to bypass intended outbound-call restrictions by leveraging the availability of these credentials.
channels/chansip.c in Asterisk Open Source 1.8.x before 1.8.13.1 and 10.x before 10.5.2, Asterisk Business Edition C.3.x before C.3.7.5, Certified Asterisk 1.8.11-certx before 1.8.11-cert4, and Asterisk Digiumphones 10.x.x-digiumphones before 10.5.2-digiumphones does not properly handle a provisional response to a SIP reINVITE request, which allows remote authenticated users to cause a denial of service (RTP port exhaustion) via sessions that lack final responses.
Double free vulnerability in apps/appvoicemail.c in Asterisk Open Source 1.8.x before 1.8.13.1 and 10.x before 10.5.2, Certified Asterisk 1.8.11-certx before 1.8.11-cert4, and Asterisk Digiumphones 10.x.x-digiumphones before 10.5.2-digiumphones allows remote authenticated users to cause a denial of service (daemon crash) by establishing multiple voicemail sessions and accessing both the Urgent mailbox and the INBOX mailbox.
The SIP channel driver (channels/chansip.c) in Asterisk Open Source 1.8.17.x through 1.8.22.x, 1.8.23.x before 1.8.23.1, and 11.x before 11.5.1 and Certified Asterisk 1.8.15 before 1.8.15-cert3 and 11.2 before 11.2-cert2 allows remote attackers to cause a denial of service (NULL pointer dereference, segmentation fault, and daemon crash) via an ACK with SDP to a previously terminated channel. NOTE: some of these details are obtained from third party information.
Double free vulnerability in the WebSocket Server (reshttpwebsocket module) in Asterisk Open Source 11.x before 11.14.2, 12.x before 12.7.2, and 13.x before 13.0.2 and Certified Asterisk 11.6 before 11.6-cert9 allows remote attackers to cause a denial of service (crash) by sending a zero length frame after a non-zero length frame.
ConfBridge in Asterisk 11.x before 11.14.1, 12.x before 12.7.1, and 13.x before 13.0.1 and Certified Asterisk 11.6 before 11.6-cert8 allows remote authenticated users to (1) gain privileges via vectors related to an external protocol to the CONFBRIDGE dialplan function or (2) execute arbitrary system commands via a crafted ConfbridgeStartRecord AMI action.
The (1) VoIP channel drivers, (2) DUNDi, and (3) Asterisk Manager Interface (AMI) in Asterisk Open Source 1.8.x before 1.8.32.1, 11.x before 11.14.1, 12.x before 12.7.1, and 13.x before 13.0.1 and Certified Asterisk 1.8.28 before 1.8.28-cert3 and 11.6 before 11.6-cert8 allows remote attackers to bypass the ACL restrictions via a packet with a source IP that does not share the address family as the first ACL entry.
The DB dialplan function in Asterisk Open Source 1.8.x before 1.8.32, 11.x before 11.1.4.1, 12.x before 12.7.1, and 13.x before 13.0.1 and Certified Asterisk 1.8 before 1.8.28-cert8 and 11.6 before 11.6-cert8 allows remote authenticated users to gain privileges via a call from an external protocol, as demonstrated by the AMI protocol.
ConfBridge in Asterisk 11.x before 11.14.1 and Certified Asterisk 11.6 before 11.6-cert8 does not properly handle state changes, which allows remote attackers to cause a denial of service (channel hang and memory consumption) by causing transitions to be delayed, which triggers a state change from hung up to waiting for media.
Asterisk Open Source 11.x before 11.12.1 and 12.x before 12.5.1 and Certified Asterisk 11.6 before 11.6-cert6, when using the resfaxspandsp module, allows remote authenticated users to cause a denial of service (crash) via an out of call message, which is not properly handled in the ReceiveFax dialplan application.
Asterisk Open Source 1.8.x before 1.8.28.1, 11.x before 11.10.1, and 12.x before 12.3.1 and Certified Asterisk 1.8.15 before 1.8.15-cert6 and 11.6 before 11.6-cert3 allows remote attackers to cause a denial of service (connection consumption) via a large number of (1) inactive or (2) incomplete HTTP connections.
Asterisk Open Source 11.x before 11.10.1 and 12.x before 12.3.1 and Certified Asterisk 11.6 before 11.6-cert3 allows remote authenticated Manager users to execute arbitrary shell commands via a MixMonitor action.
Asterisk Open Source 1.8 before 1.8.32.3, 11.x before 11.17.1, 12.x before 12.8.2, and 13.x before 13.3.2 and Certified Asterisk 1.8.28 before 1.8.28-cert5, 11.6 before 11.6-cert11, and 13.1 before 13.1-cert2, when registering a SIP TLS device, does not properly handle a null byte in a domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certification Authority.
An issue was discovered in Asterisk Open Source 11.x before 11.25.1, 13.x before 13.13.1, and 14.x before 14.2.1 and Certified Asterisk 11.x before 11.6-cert16 and 13.x before 13.8-cert4. The chansip channel driver has a liberal definition for whitespace when attempting to strip the content between a SIP header name and a colon character. Rather than following RFC 3261 and stripping only spaces and horizontal tabs, Asterisk treats any non-printable ASCII character as if it were whitespace. This means that headers such as Contact\x01: will be seen as a valid Contact header. This mostly does not pose a problem until Asterisk is placed in tandem with an authenticating SIP proxy. In such a case, a crafty combination of valid and invalid To headers can cause a proxy to allow an INVITE request into Asterisk without authentication since it believes the request is an in-dialog request. However, because of the bug described above, the request will look like an out-of-dialog request to Asterisk. Asterisk will then process the request as a new call. The result is that Asterisk can process calls from unvetted sources without any authentication. If you do not use a proxy for authentication, then this issue does not affect you. If your proxy is dialog-aware (meaning that the proxy keeps track of what dialogs are currently valid), then this issue does not affect you. If you use chanpjsip instead of chansip, then this issue does not affect you.
Asterisk Open Source 1.8.x, 11.x before 11.21.1, 12.x, and 13.x before 13.7.1 and Certified Asterisk 1.8.28, 11.6 before 11.6-cert12, and 13.1 before 13.1-cert3 allow remote authenticated users to cause a denial of service (uninitialized pointer dereference and crash) via a zero length error correcting redundancy packet for a UDPTL FAX packet that is lost.
An issue was discovered in Asterisk 13.18.4 and older, 14.7.4 and older, 15.1.4 and older, and 13.18-cert1 and older. A select set of SIP messages create a dialog in Asterisk. Those SIP messages must contain a contact header. For those messages, if the header was not present and the PJSIP channel driver was used, Asterisk would crash. The severity of this vulnerability is somewhat mitigated if authentication is enabled. If authentication is enabled, a user would have to first be authorized before reaching the crash point.
A Remote Crash issue was discovered in Asterisk Open Source 13.x before 13.18.4, 14.x before 14.7.4, and 15.x before 15.1.4 and Certified Asterisk before 13.13-cert9. Certain compound RTCP packets cause a crash in the RTCP Stack.
An issue was discovered in chanskinny.c in Asterisk Open Source 13.18.2 and older, 14.7.2 and older, and 15.1.2 and older, and Certified Asterisk 13.13-cert7 and older. If the chanskinny (aka SCCP protocol) channel driver is flooded with certain requests, it can cause the asterisk process to use excessive amounts of virtual memory, eventually causing asterisk to stop processing requests of any kind.