When BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8 are processing certain rare data sequences occurring in PPTP VPN traffic, the BIG-IP system may execute incorrect logic. The TMM may restart and produce a core file as a result of this condition. The BIG-IP system provisioned with the CGNAT module and configured with a virtual server using a PPTP profile is exposed to this vulnerability.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, WebAccelerator and WebSafe software version 13.0.0, 12.0.0 - 12.1.2, 11.6.0 - 11.6.1 and 11.5.0 - 11.5.4, in some circumstances, Traffic Management Microkernel (TMM) does not properly handle certain malformed TLS1.2 records, which allows remote attackers to cause a denial-of-service (DoS) or possible remote command execution on the BIG-IP system.

By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743.

An excessive resource consumption flaw was found in the way the Linux kernel's networking subsystem processed TCP Selective Acknowledgment (SACK) segments. While processing SACK segments, the Linux kernel's socket buffer (SKB) data structure becomes fragmented, which leads to increased resource utilization to traverse and process these fragments as further SACK segments are received on the same TCP connection. A remote attacker could use this flaw to cause a denial of service (DoS) by sending a crafted sequence of SACK segments on a TCP connection.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and Websafe software version 13.0.0, 12.0.0 to 12.1.2, 11.6.0 to 11.6.1 and 11.5.0 - 11.5.4, an undisclosed sequence of packets sent to BIG-IP High Availability state mirror listeners (primary and/or secondary IP) may cause TMM to restart.

In F5 BIG-IP APM software versions 11.5.0, 11.5.1, 11.5.2, 11.5.3, 11.5.4, 11.6.0, 11.6.1, 12.0.0, 12.1.0, 12.1.1 and 12.1.2 BIG-IP APM portal access requests do not return the intended resources in some cases. This may allow access to internal BIG-IP APM resources, however the application resources and backend servers are unaffected.

The Configuration utility in F5 BIG-IP LTM, Analytics, APM, ASM, GTM, and Link Controller 11.x before 11.2.1 HF16, 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, and 11.6.x before 11.6.1; BIG-IP AAM 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, and 11.6.x before 11.6.1; BIG-IP AFM and PEM 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, and 11.6.x before 11.6.1; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.x before 11.2.1 HF16 and 11.3.0; and BIG-IP PSM 11.x before 11.2.1 HF16, 11.3.x, and 11.4.x before 11.4.1 HF10 allows remote authenticated users with certain permissions to gain privileges by leveraging an Access Policy Manager customization configuration section that allows file uploads.

Memory leak in the last hop kernel module in F5 BIG-IP LTM, GTM, and Link Controller 10.1.x, 10.2.x before 10.2.4 HF13, 11.x before 11.2.1 HF15, 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.x before HF6, BIG-IP AAM 11.4.x, 11.5.x before 11.5.3 HF2 and 11.6.0 before HF6, BIG-IP AFM and PEM 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.0 before HF6, BIG-IP Analytics 11.x before 11.2.1 HF15, 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.0 before HF6, BIG-IP APM and ASM 10.1.0 through 10.2.4, 11.x before 11.2.1 HF15, 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.0 before HF6, BIG-IP Edge Gateway, WebAccelerator, and WOM 10.1.x, 10.2.x before 10.2.4 HF13, 11.x before 11.2.1 HF15, and 11.3.0, BIG-IP PSM 10.1.x, 10.2.x before 10.2.4 HF13, 11.x before 11.2.1 HF15, 11.3.x, and 11.4.x before 11.4.1 HF, Enterprise Manager 3.0.0 through 3.1.1, BIG-IQ Cloud and Security 4.0.0 through 4.5.0, BIG-IQ Device 4.2.0 through 4.5.0, and BIG-IQ ADC 4.5.0 might allow remote attackers to cause a denial of service (memory consumption) via a large number of crafted UDP packets.

In F5 BIG-IP 11.2.1, 11.4.0 through 11.6.1, and 12.0.0 through 12.1.2, an unauthenticated user with access to the control plane may be able to delete arbitrary files through an undisclosed mechanism.

The Traffic Management Microkernel (TMM) in F5 BIG-IP before 11.5.4 HF3, 11.6.x before 11.6.1 HF2 and 12.x before 12.1.2 does not properly handle minimum path MTU options for IPv6, which allows remote attackers to cause a denial-of-service (DoS) through unspecified vectors.

The Traffic Management Microkernel (TMM) in F5 BIG-IP LTM, AAM, AFM, APM, ASM, GTM, Link Controller, PEM, PSM, and WebSafe 11.6.0 before 11.6.0 HF6, 11.5.0 before 11.5.3 HF2, and 11.3.0 before 11.4.1 HF10 may suffer from a memory leak while handling certain types of TCP traffic. Remote attackers may cause a denial of service (DoS) by way of a crafted TCP packet.

The RESOLV::lookup iRule command in F5 BIG-IP LTM, APM, ASM, and Link Controller 10.2.1 through 10.2.4, 11.2.1, 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1, and 12.0.0 before HF3; BIG-IP AAM, AFM, and PEM 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1, and 12.0.0 before HF3; BIG-IP Analytics 11.2.1, 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1, and 12.0.0 before HF3; BIG-IP DNS 12.0.0 before HF3; BIG-IP Edge Gateway, WebAccelerator, and WOM 10.2.1 through 10.2.4 and 11.2.1; BIG-IP GTM 10.2.1 through 10.2.4, 11.2.1, 11.4.x, 11.5.x before 11.5.4 HF2, and 11.6.x before 11.6.1; and BIG-IP PSM 10.2.1 through 10.2.4 and 11.4.0 through 11.4.1 allows remote DNS servers to cause a denial of service (CPU consumption or Traffic Management Microkernel crash) via a crafted PTR response.

The default configuration of the IPsec IKE peer listener in F5 BIG-IP LTM, Analytics, APM, ASM, and Link Controller 11.2.1 before HF16, 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF2; BIG-IP AAM, AFM, and PEM 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF2; BIG-IP DNS 12.x before 12.0.0 HF2; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.2.1 before HF16; BIG-IP GTM 11.2.1 before HF16, 11.4.x, 11.5.x before 11.5.4 HF2, and 11.6.x before 11.6.1; and BIG-IP PSM 11.4.0 through 11.4.1 improperly enables the anonymous IPsec IKE peer configuration object, which allows remote attackers to establish an IKE Phase 1 negotiation and possibly conduct brute-force attacks against Phase 2 negotiations via unspecified vectors.

F5 BIG-IP LTM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.3.x, 11.4.x before 11.4.1 build 685-HF10, 11.5.1 before build 10.104.180, 11.5.2 before 11.5.4 build 0.1.256, 11.6.0 before build 6.204.442, and 12.0.0 before build 1.14.628; BIG-IP AAM 11.4.x before 11.4.1 build 685-HF10, 11.5.1 before build 10.104.180, 11.5.2 before 11.5.4 build 0.1.256, 11.6.0 before build 6.204.442, and 12.0.0 before build 1.14.628; BIG-IP DNS 12.0.0 before build 1.14.628; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.3.0; BIG-IP GTM 11.3.x, 11.4.x before 11.4.1 build 685-HF10, 11.5.1 before build 10.104.180, 11.5.2 before 11.5.4 build 0.1.256, and 11.6.0 before build 6.204.442; BIG-IP PSM 11.3.x and 11.4.x before 11.4.1 build 685-HF10; BIG-IQ Cloud, Device, and Security 4.2.0 through 4.5.0; and BIG-IQ ADC 4.5.0 do not properly regenerate certificates and keys when deploying cloud images in Amazon Web Services (AWS), Azure or Verizon cloud services environments, which allows attackers to obtain sensitive information or cause a denial of service (disruption) by leveraging a target instance configuration.

An attacker may be able to cause a denial-of-service (DoS) attack against the sshd component in F5 BIG-IP, Enterprise Manager, BIG-IQ, and iWorkflow.

Last updated 24 July 2024

On BIG-IP versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, users with access to edit iRules are able to create iRules which can lead to an elevation of privilege, configuration modification, and arbitrary system command execution.

On versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IP virtual servers with Loose Initiation enabled on a FastL4 profile may be subject to excessive flow usage under undisclosed conditions.

On BIG-IP versions 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5, while processing traffic through a standard virtual server that targets a FastL4 virtual server (VIP on VIP), hardware appliances may stop responding.

On versions 15.0.0-15.0.1.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, under certain conditions, a multi-bladed BIG-IP Virtual Clustered Multiprocessing (vCMP) may drop broadcast packets when they are rebroadcast to the vCMP guest secondary blades. An attacker can leverage the fragmented broadcast IP packets to perform any type of fragmentation-based attack.

BIG-IP APM Edge Client before version 7.1.8 (7180.2019.508.705) logs the full apm session ID in the log files. Vulnerable versions of the client are bundled with BIG-IP APM versions 15.0.0-15.0.1, 14,1.0-14.1.0.6, 14.0.0-14.0.0.4, 13.0.0-13.1.1.5, 12.1.0-12.1.5, and 11.5.1-11.6.5. In BIG-IP APM 13.1.0 and later, the APM Clients components can be updated independently from BIG-IP software. Client version 7.1.8 (7180.2019.508.705) and later has the fix.

On BIG-IP 11.5.1-11.6.4, iRules performing HTTP header manipulation may cause an interruption to service when processing traffic handled by a Virtual Server with an associated HTTP profile, in specific circumstances, when the requests do not strictly conform to RFCs.

On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, DNS query TCP connections that are aborted before receiving a response from a DNS cache may cause TMM to restart.

On versions 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.2, 12.1.0-12.1.4.1, and 11.5.2-11.6.4, an attacker sending specifically crafted DHCPv6 requests through a BIG-IP virtual server configured with a DHCPv6 profile may be able to cause the TMM process to produce a core file.

On BIG-IP 11.5.2-11.6.4 and Enterprise Manager 3.1.1, REST users with guest privileges may be able to escalate their privileges and run commands with admin privileges.

On BIG-IP 14.0.0-14.1.0.5, 13.0.0-13.1.2, 12.1.0-12.1.4.1, 11.5.2-11.6.4, FTP traffic passing through a Virtual Server with both an active FTP profile associated and connection mirroring configured may lead to a TMM crash causing the configured HA action to be taken.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4.1, 11.6.1-11.6.3.4, and 11.5.2-11.5.8 and BIG-IQ 7.0.0-7.1.0.2, 6.0.0-6.1.0, and 5.1.0-5.4.0, an undisclosed iControl REST worker is vulnerable to command injection by an admin/resource admin user. This issue impacts both iControl REST and tmsh implementations.

On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.5, 13.0.0-13.1.1.4, 12.1.0-12.1.4.1, and 11.5.1-11.6.4 and BIG-IQ 6.0.0-6.1.0 and 5.1.0-5.4.0, an undisclosed iControl REST worker vulnerable to command injection for an Administrator user.

On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, administrative users with TMSH access can overwrite critical system files on BIG-IP which can result in bypass of whitelist / blacklist restrictions enforced by appliance mode.

In BIG-IP versions 15.0.0-15.1.0.3, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1, an authorized user provided with access only to the TMOS Shell (tmsh) may be able to conduct arbitrary file read/writes via the built-in sftp functionality.