On BIG-IP 11.5.1-11.5.8, 11.6.1-11.6.3, 12.1.0-12.1.3.6, 13.0.0-13.1.1.1, and 14.0.0-14.0.0.2, under certain conditions, hardware systems with a High-Speed Bridge and using non-default Layer 2 forwarding configurations may experience a lockup of the High-Speed Bridge.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.3, 12.1.0-12.1.3.7, and 11.6.0-11.6.3.2, a reflected Cross Site Scripting (XSS) vulnerability is present in an undisclosed page of the BIG-IP TMUI (Traffic Management User Interface) also known as the BIG-IP configuration utility.
When BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.1.0-2.3.0, or Enterprise Manager 3.1.1 is licensed for Appliance Mode, Admin and Resource administrator roles can by-pass BIG-IP Appliance Mode restrictions to overwrite critical system files. Attackers of high privilege level are able to overwrite critical system files which bypasses security controls in place to limit TMSH commands. This is possible with an administrator or resource administrator roles when granted TMSH. Resource administrator roles must have TMSH access in order to perform this attack.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 6.0.0-6.0.1, 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.0.1-2.3.0, or Enterprise Manager 3.1.1 a BIG-IP user granted with tmsh access may cause the BIG-IP system to experience denial-of-service (DoS) when the BIG-IP user uses the tmsh utility to run the edit cli preference command and proceeds to save the changes to another filename repeatedly. This action utilises storage space on the /var partition and when performed repeatedly causes the /var partition to be full.
A vulnerability in BIG-IP APM portal access 11.5.1-11.5.7, 11.6.0-11.6.3, and 12.1.0-12.1.3 discloses the BIG-IP software version in rewritten pages.
A remote attacker may be able to disrupt services on F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.1, or 11.2.1-11.5.6 if the TMM virtual server is configured with a HTML or a Rewrite profile. TMM may restart while processing some specially prepared HTML content from the back end.
On F5 BIG-IP 13.0.0, 12.1.0-12.1.2, 11.6.0-11.6.3.1, or 11.2.1-11.5.6 a domain name cached within the DNS Cache of TMM may continue to be resolved by the cache even after the parent server revokes the record, if the DNS Cache is receiving a stream of requests for the cached name.
In F5 BIG-IP 12.0.0-12.1.2, 11.6.0-11.6.1, 11.5.1-11.5.5, or 11.2.1 there is a vulnerability in TMM related to handling of invalid IP addresses.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, Websafe software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1, 11.4.0 to 11.5.4, 11.2.1, in some cases TMM may crash when processing TCP traffic. This vulnerability affects TMM via a virtual server configured with TCP profile. Traffic processing is disrupted while Traffic Management Microkernel (TMM) restarts. If the affected BIG-IP system is configured to be part of a device group, it will trigger a failover to the peer device.
In F5 BIG-IP LTM, AAM, AFM, APM, ASM, Link Controller, PEM, PSM software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1, 11.4.0 to 11.5.4, when a virtual server uses the standard configuration of HTTP/2 or SPDY profile with Client SSL profile, and the client initiates a number of concurrent streams beyond the advertised limit can cause a disruption of service. Remote client initiating stream beyond the advertised limit can cause a disruption of service. The Traffic Management Microkernel (TMM) data plane is exposed to this issue; the control plane is not exposed.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, WebAccelerator software version 12.0.0 - 12.1.2, 11.6.0 - 11.6.1, 11.4.0 - 11.5.4, 11.2.1, when ConfigSync is configured, attackers on adjacent networks may be able to bypass the TLS protections usually used to encrypted and authenticate connections to mcpd. This vulnerability may allow remote attackers to cause a denial-of-service (DoS) attack via resource exhaustion.
A stored cross-site scripting (XSS) vulnerability in the Configuration utility device name change page in BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, PSM, WebAccelerator, WOM and WebSafe version 12.0.0 - 12.1.2, 11.4.0 - 11.6.1, and 11.2.1 allows an authenticated user to inject arbitrary web script or HTML. Exploitation requires Resource Administrator or Administrator privileges, and it could cause the Configuration utility client to become unstable.
Buffer overflow in the mcpq daemon in F5 BIG-IP systems 10.x before 10.2.4 HF12, 11.x before 11.2.1 HF15, 11.3.x, 11.4.x before 11.4.1 HF9, 11.5.x before 11.5.2 HF1, and 11.6.0 before HF4, and Enterprise Manager 2.1.0 through 2.3.0 and 3.x before 3.1.1 HF5 allows remote authenticated administrators to cause a denial of service via unspecified vectors.
The TMM SSO plugin in F5 BIG-IP APM 12.0.0 - 12.1.1, 11.6.0 - 11.6.1 HF1, 11.5.4 - 11.5.4 HF2, when configured as a SAML Identity Provider with a Service Provider (SP) connector, might allow traffic to be disrupted or failover initiated when a malformed, signed SAML authentication request from an authenticated user is sent via the SP connector.
In some cases the MCPD binary cache in F5 BIG-IP devices may allow a user with Advanced Shell access, or privileges to generate a qkview, to temporarily obtain normally unrecoverable information.
The Configuration utility in F5 BIG-IP systems 11.0.x, 11.1.x, 11.2.x before 11.2.1 HF16, 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4 HF2, 1.6.x before 11.6.1, and 12.0.0 before HF1 allows remote administrators to read Access Policy Manager (APM) access logs via unspecified vectors.
The iControl REST service in F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.5.x before 11.5.4, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF3; BIG-IP DNS 12.x before 12.0.0 HF3; BIG-IP GTM 11.5.x before 11.5.4 and 11.6.x before 11.6.1; BIG-IQ Cloud and Security 4.0.0 through 4.5.0; BIG-IQ Device 4.2.0 through 4.5.0; BIG-IQ ADC 4.5.0; BIG-IQ Centralized Management 4.6.0; and BIG-IQ Cloud and Orchestration 1.0.0 allows remote authenticated administrators to obtain sensitive information via unspecified vectors.
Open redirect vulnerability in F5 BIG-IP APM 11.2.1, 11.4.x, 11.5.x, and 11.6.x before 11.6.0 HF6 and Edge Gateway 11.2.1, when using multi-domain single sign-on (SSO), allows remote attackers to redirect users to arbitrary web sites and conduct phishing attacks via a base64-encoded URL in the SSOORIGURI parameter.
F5 BIG-IP LTM, AFM, Analytics, APM, ASM, Link Controller, and PEM 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF1; BIG-IP AAM 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF1; BIG-IP DNS 12.x before 12.0.0 HF1; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.3.0; BIG-IP GTM 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, and 11.6.x before 11.6.1; BIG-IP PSM 11.3.x and 11.4.x before 11.4.1 HF10; Enterprise Manager 3.0.0 through 3.1.1; BIG-IQ Cloud and BIG-IQ Security 4.0.0 through 4.5.0; BIG-IQ Device 4.2.0 through 4.5.0; BIG-IQ ADC 4.5.0; BIG-IQ Centralized Management 4.6.0; and BIG-IQ Cloud and Orchestration 1.0.0 on the 3900, 6900, 8900, 8950, 11000, 11050, PB100 and PB200 platforms, when software SYN cookies are configured on virtual servers, allow remote attackers to cause a denial of service (High-Speed Bridge hang) via an invalid TCP segment.
The Single Sign-On (SSO) feature in F5 BIG-IP APM 11.x before 11.6.0 HF6 and BIG-IP Edge Gateway 11.0.0 through 11.3.0 might allow remote attackers to obtain sensitive SessionId information by leveraging access to the Location HTTP header in a redirect.
Directory traversal vulnerability in the configuration utility in F5 BIG-IP before 12.0.0 and Enterprise Manager 3.0.0 through 3.1.1 allows remote authenticated users to access arbitrary files in the web root via unspecified vectors.
The automatic signature update functionality in the (1) Phone Home feature in F5 BIG-IP LTM, AAM, AFM, Analytics, APM, GTM, and Link Controller 11.5.0 through 11.6.0, ASM 10.0.0 through 11.6.0, and PEM 11.3.0 through 11.6.0 and the (2) Call Home feature in ASM 10.0.0 through 11.6.0 and PEM 11.3.0 through 11.6.0 does not properly validate server SSL certificates, which allows remote attackers to conduct man-in-the-middle attacks via a crafted certificate.