Last updated 24 July 2024

When TCP Verified Accept is enabled on a TCP profile that is configured on a Virtual Server, undisclosed requests can cause an increase in memory resource utilization.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

The Diffie-Hellman Key Agreement Protocol allows remote attackers (from the client side) to send arbitrary numbers that are actually not public keys, and trigger expensive server-side DHE modular-exponentiation calculations, aka a D(HE)at or D(HE)ater attack. The client needs very little CPU resources and network bandwidth. The attack may be more disruptive in cases where a client can require a server to select its largest supported key size. The basic attack scenario is that the client must claim that it can only communicate with DHE, and the server must be configured to allow DHE.

In all versions,

BIG-IP and BIG-IQ are vulnerable to cross-site request forgery (CSRF) attacks through iControl SOAP.

Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

In all versions of BIG-IP, when running in Appliance mode, an authenticated user assigned the Administrator role may be able to bypass Appliance mode restrictions, utilizing an undisclosed iControl REST endpoint. A successful exploit can allow the attacker to cross a security boundary.

Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

On BIG-IP versions 16.1.x before 16.1.3.3, 15.1.x before 15.1.8, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when a SIP profile is configured on a Message Routing type virtual server, undisclosed traffic can cause TMM to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

On version 14.1.x before 14.1.5.3, and all versions of 13.1.x, when the BIG-IP APM system is configured with all the following elements, undisclosed requests may cause the Traffic Management Microkernel (TMM) to terminate:

An OAuth Server that references an OAuth Provider An OAuth profile with the Authorization Endpoint set to '/' An access profile that references the above OAuth profile and is associated with an HTTPS virtual server

Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A DLL hijacking vulnerability exists in the BIG-IP Edge Client Windows Installer.

On BIG-IP versions 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when a SIP profile is configured on a Message Routing type virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

In BIP-IP versions 17.0.x before 17.0.0.2, 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, when OCSP authentication profile is configured on a virtual server, undisclosed requests can cause an increase in CPU resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

An improper certificate validation vulnerability exists in BIG-IP Edge Client for Windows and macOS and may allow an attacker to impersonate a BIG-IP APM system.

Multiple reflected cross-site scripting (XSS) vulnerabilities exist in undisclosed pages of the BIG-IP Configuration utility that allow an attacker to run JavaScript in the context of the currently logged-in user.

When running in Appliance mode, an authenticated user assigned the Administrator role may be able to bypass Appliance mode restrictions utilizing BIG-IP external monitor on a BIG-IP system. A successful exploit can allow the attacker to cross a security boundary.

An insufficient verification of data vulnerability exists in BIG-IP Edge Client Installer on macOS that may allow an attacker elevation of privileges during the installation process.

An insufficient verification of data vulnerability exists in BIG-IP Edge Client for Windows and macOS that may allow an attacker to modify its configured server list.

The BIG-IP Edge Client Installer on macOS does not follow best practices for elevating privileges during the installation process.

A reflected cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Configuration utility that allows an attacker to run JavaScript in the context of the currently logged-in user.

An authenticated user's session cookie may remain valid for a limited time after logging out from the BIG-IP Configuration utility on a multi-blade VIPRION platform.

When IPsec is configured on a virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.

When a non-admin user has been assigned an administrator role via an iControl REST PUT request and later the user's role is reverted back to a non-admin role via the Configuration utility, tmsh, or iControl REST, the BIG-IP non-admin user can still access the iControl REST admin resource.

The BIG-IP Edge Client Installer on macOS does not follow best practices for elevating privileges during the installation process.

On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, when an Internet Content Adaptation Protocol (ICAP) profile is configured on a virtual server, undisclosed traffic can cause an increase in Traffic Management Microkernel (TMM) memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

On all versions of 16.1.x, 15.1.x, 14.1.x, 13.1.x, 12.1.x, and 11.6.x of F5 BIG-IP Advanced WAF, ASM, and ASM, and F5 BIG-IP Guided Configuration (GC) all versions prior to 9.0, when running in Appliance mode, an authenticated attacker with Administrator role privilege may be able to bypass Appliance mode restrictions due to a missing integrity check in F5 BIG-IP Guided Configuration. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

In BIG-IP Versions 16.1.x before 16.1.3.1, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5, and all versions of 13.1.x, when an LTM virtual server is configured to perform normalization, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743.

In BIG-IP Versions 16.1.x before 16.1.3.1, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5.1, and all versions of 13.1.x, an authenticated attacker with Resource Administrator or Manager privileges can create or modify existing monitor objects in the Configuration utility in an undisclosed manner leading to a privilege escalation. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

On F5 BIG-IP 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, and 13.1.x versions prior to 13.1.5, when the BIG-IP CGNAT Large Scale NAT (LSN) pool is configured on a virtual server and packet filtering is enabled, undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

On all versions of 16.1.x, 15.1.x, 14.1.x, 13.1.x, 12.1.x, and 11.6.x of F5 BIG-IP Advanced WAF, ASM, and ASM, and F5 BIG-IP Guided Configuration (GC) all versions prior to 9.0, when running in Appliance mode, an authenticated attacker assigned the Administrator role may be able to bypass Appliance mode restrictions, utilizing command injection vulnerabilities in undisclosed URIs in F5 BIG-IP Guided Configuration. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

On all versions of 16.1.x, 15.1.x, 14.1.x, 13.1.x, 12.1.x, and 11.6.x of F5 BIG-IP APM, and F5 BIG-IP Guided Configuration (GC) all versions prior to 9.0, a reflected cross-site scripting (XSS) vulnerability exists in an undisclosed page of F5 BIG-IP Guided Configuration that allows an attacker to execute JavaScript in the context of the currently logged-in user. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, a flaw in the way reply ICMP packets are limited in the Traffic Management Microkernel (TMM) allows an attacker to quickly scan open UDP ports. This flaw allows an off-path remote attacker to effectively bypass source port UDP randomization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated