On BIG-IP 11.5.1-11.5.8, 11.6.1-11.6.3, 12.1.0-12.1.3.6, 13.0.0-13.1.1.1, and 14.0.0-14.0.0.2, under certain conditions, hardware systems with a High-Speed Bridge and using non-default Layer 2 forwarding configurations may experience a lockup of the High-Speed Bridge.
In versions 7.1.5-7.1.8, the BIG-IP Edge Client components in BIG-IP APM, Edge Gateway, and FirePass legacy allow attackers to obtain the full session ID from process memory.
On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, internal methods used to prevent arbitrary file overwrites in Appliance Mode were not fully effective. An authenticated attacker with a high privilege level may be able to bypass protections implemented in appliance mode to overwrite arbitrary system files.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 6.0.0-6.0.1, 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.0.1-2.3.0, or Enterprise Manager 3.1.1 a BIG-IP user granted with tmsh access may cause the BIG-IP system to experience denial-of-service (DoS) when the BIG-IP user uses the tmsh utility to run the edit cli preference command and proceeds to save the changes to another filename repeatedly. This action utilises storage space on the /var partition and when performed repeatedly causes the /var partition to be full.
On BIG-IP 14.1.0-14.1.0.5 and 14.0.0-14.0.0.4, Malformed http requests made to an undisclosed iControl REST endpoint can lead to infinite loop of the restjavad process.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, a high volume of malformed analytics report requests leads to instability in restjavad process. This causes issues with both iControl REST and some portions of TMUI. The attack requires an authenticated user with any role.
On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, a user with the Resource Administrator role is able to overwrite sensitive low-level files (such as /etc/passwd) using SFTP to modify user permissions, without Advanced Shell access. This is contrary to our definition for the Resource Administrator (RA) role restrictions.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, and 11.5.1-11.6.4, a reflected cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Traffic Management User Interface (TMUI) also known as the BIG-IP Configuration utility.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.3, 12.1.0-12.1.3.7, and 11.6.0-11.6.3.2, a reflected Cross Site Scripting (XSS) vulnerability is present in an undisclosed page of the BIG-IP TMUI (Traffic Management User Interface) also known as the BIG-IP configuration utility.
On BIG-IP 14.0.0-14.0.0.2 or 13.0.0-13.1.1.1, in certain circumstances, when processing traffic through a Virtual Server with an associated MQTT profile, the TMM process may produce a core file and take the configured HA action.
On BIG-IP APM 14.0.0-14.0.0.2 or 13.0.0-13.1.1.1, TMM may restart when processing a specially crafted request with APM portal access.
A race condition which may occur when discarding malformed packets can result in BIND exiting due to a REQUIRE assertion failure in dispatch.c. Versions affected: BIND 9.11.0 -> 9.11.7, 9.12.0 -> 9.12.4-P1, 9.14.0 -> 9.14.2. Also all releases of the BIND 9.13 development branch and version 9.15.0 of the BIND 9.15 development branch and BIND Supported Preview Edition versions 9.11.3-S1 -> 9.11.7-S1.
On BIG-IP 11.5.1-11.6.3.2, 12.1.3.4-12.1.3.7, 13.0.0 HF1-13.1.1.1, and 14.0.0-14.0.0.2, Multi-Path TCP (MPTCP) does not protect against multiple zero length DATAFINs in the reassembly queue, which can lead to an infinite loop in some circumstances.
On BIG-IP versions 15.0.0-15.1.0, 14.0.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IQ versions 7.0.0, 6.0.0-6.1.0, and 5.0.0-5.4.0, iWorkflow version 2.3.0, and Enterprise Manager version 3.1.1, authenticated users granted TMOS Shell (tmsh) privileges are able access objects on the file system which would normally be disallowed by tmsh restrictions. This allows for authenticated, low privileged attackers to access objects on the file system which would not normally be allowed.
The BIG-IP APM Edge Client for macOS bundled with BIG-IP APM 15.0.0-15.0.1, 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.1.0-13.1.1.5, 12.1.0-12.1.5, and 11.5.1-11.6.5 may allow unprivileged users to access files owned by root.
On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, and 12.1.0-12.1.5.1 and BIG-IQ 5.2.0-7.1.0, when creating a QKView, credentials for binding to LDAP servers used for remote authentication of the BIG-IP administrative interface will not fully obfuscate if they contain whitespace.
On versions 11.2.1. and greater, unrestricted Snapshot File Access allows BIG-IP system's user with any role, including Guest Role, to have access and download previously generated and available snapshot files on the BIG-IP configuration utility such as QKView and TCPDumps.
When BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, 11.6.0-11.6.3.2, or 11.2.1-11.5.6, BIG-IQ Centralized Management 5.0.0-5.4.0 or 4.6.0, BIG-IQ Cloud and Orchestration 1.0.0, iWorkflow 2.1.0-2.3.0, or Enterprise Manager 3.1.1 is licensed for Appliance Mode, Admin and Resource administrator roles can by-pass BIG-IP Appliance Mode restrictions to overwrite critical system files. Attackers of high privilege level are able to overwrite critical system files which bypasses security controls in place to limit TMSH commands. This is possible with an administrator or resource administrator roles when granted TMSH. Resource administrator roles must have TMSH access in order to perform this attack.
The BIG-IP 15.0.0-15.0.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5.1, BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1 configuration utility is vulnerable to Anti DNS Pinning (DNS Rebinding) attack.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, under certain circumstances, attackers can decrypt configuration items that are encrypted because the vCMP configuration unit key is generated with insufficient randomness. The attack prerequisite is direct access to encrypted configuration and/or UCS files.
On BIG-IP APM 14.0.0 to 14.0.0.4, 13.0.0 to 13.1.1.3 and 12.1.0 to 12.1.3.7, a reflected cross-site scripting (XSS) vulnerability exists in the resource information page for authenticated users when a full webtop is configured on the BIG-IP APM system.
On BIG-IP versions 15.0.0-15.0.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, the TMM process may restart when the packet filter feature is enabled.
An Information Disclosure vulnerability exists in NTP 4.2.7p25 private (mode 6/7) messages via a GETRESTRICT control message, which could let a malicious user obtain sensitive information.
In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.2, 12.1.0-12.1.4.1, 11.5.2-11.6.4, when processing authentication attempts for control-plane users MCPD leaks a small amount of memory. Under rare conditions attackers with access to the management interface could eventually deplete memory on the system.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, SNMP exposes sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is inserted into various profile types and accessed using SNMPv2.
On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, Administrator and Resource Administrator roles might exploit TMSH access to bypass Appliance Mode restrictions on BIG-IP systems.
On versions 15.0.0-15.0.1.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, the BIG-IP APM system logs the client-session-id when a per-session policy is attached to the virtual server with debug logging enabled.
On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, users with the Resource Administrator role can modify sensitive portions of the filesystem if provided Advanced Shell Access, such as editing /etc/passwd. This allows modifications to user objects and is contrary to our definition for the Resource Administrator (RA) role restrictions.
On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5, vCMP hypervisors are incorrectly exposing the plaintext unit key for their vCMP guests on the filesystem.