A race condition which may occur when discarding malformed packets can result in BIND exiting due to a REQUIRE assertion failure in dispatch.c. Versions affected: BIND 9.11.0 -> 9.11.7, 9.12.0 -> 9.12.4-P1, 9.14.0 -> 9.14.2. Also all releases of the BIND 9.13 development branch and version 9.15.0 of the BIND 9.15 development branch and BIND Supported Preview Edition versions 9.11.3-S1 -> 9.11.7-S1.

An Information Disclosure vulnerability exists in NTP 4.2.7p25 private (mode 6/7) messages via a GETRESTRICT control message, which could let a malicious user obtain sensitive information.

On BIG-IP versions 15.0.0-15.1.0, 14.0.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IQ versions 7.0.0, 6.0.0-6.1.0, and 5.0.0-5.4.0, iWorkflow version 2.3.0, and Enterprise Manager version 3.1.1, authenticated users granted TMOS Shell (tmsh) privileges are able access objects on the file system which would normally be disallowed by tmsh restrictions. This allows for authenticated, low privileged attackers to access objects on the file system which would not normally be allowed.

On versions 15.0.0-15.0.1.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, the BIG-IP APM system logs the client-session-id when a per-session policy is attached to the virtual server with debug logging enabled.

Logic issue in the subsystem for Intel(R) SPS before versions SPSE504.01.04.275.0, SPSSoC-X04.00.04.100.0 and SPSSoC-A04.00.04.191.0 may allow a privileged user to potentially enable denial of service via local access.

On BIG-IP versions 15.0.0-15.0.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, the TMM process may restart when the packet filter feature is enabled.

The BIG-IP 15.0.0-15.0.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5.1, BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1 configuration utility is vulnerable to Anti DNS Pinning (DNS Rebinding) attack.

On BIG-IP versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5 and BIG-IQ versions 6.0.0-6.1.0 and 5.2.0-5.4.0, a user is able to obtain the secret that was being used to encrypt a BIG-IP UCS backup file while sending SNMP query to the BIG-IP or BIG-IQ system, however the user can not access to the UCS files.

The BIG-IP APM Edge Client for macOS bundled with BIG-IP APM 15.0.0-15.0.1, 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.1.0-13.1.1.5, 12.1.0-12.1.5, and 11.5.1-11.6.5 may allow unprivileged users to access files owned by root.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5, vCMP hypervisors are incorrectly exposing the plaintext unit key for their vCMP guests on the filesystem.

In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.

In versions 16.0.0-16.0.0.1, 15.1.0-15.1.0.5, 14.1.0-14.1.3, 13.1.0-13.1.3.4, and 12.1.0-12.1.5.2, a reflected cross-site scripting (XSS) vulnerability exists in the resource information page for authenticated users when a full webtop is configured on the BIG-IP APM system.

On BIG-IP 16.0.0-16.0.0.1, 15.1.0-15.1.0.5, and 14.1.0-14.1.3, a cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Configuration utility.

In BIG-IP APM versions 16.0.0-16.0.0.1, 15.1.0-15.1.0.4, 15.0.0-15.0.1.3, 14.1.0-14.1.3, 13.1.0-13.1.3.4, 12.1.0-12.1.5.2, and 11.6.1-11.6.5.2, on systems running more than one TMM instance, authenticated VPN users may consume excessive resources by sending specially-crafted malicious traffic over the tunnel.

In BIG-IP APM versions 15.0.0-15.0.1.3, 14.1.0-14.1.3, and 13.1.0-13.1.3.4, under certain conditions, the VDI plugin does not observe plugin flow-control protocol causing excessive resource consumption.

In versions 16.0.0-16.0.0.1, 15.1.0-15.1.0.5, 14.1.0-14.1.3, 13.1.0-13.1.3.4, 12.1.0-12.1.5.2, and 11.6.1-11.6.5.2, an undisclosed link on the BIG-IP APM virtual server allows a malicious user to build an open redirect URI.

On BIG-IP version 16.0.0-16.0.0.1, 15.1.0-15.1.0.5, 14.1.0-14.1.3, and 13.1.0-13.1.3.4, when an authenticated administrative user installs RPMs using the iAppsLX REST installer, the BIG-IP system does not sufficiently validate user input, allowing the user read access to the filesystem.

On versions 15.1.0-15.1.0.1, 15.0.0-15.0.1.2, and 14.1.0-14.1.2.3, in BIG-IP APM portal access, a specially crafted HTTP request can lead to reflected XSS after the BIG-IP APM system rewrites the HTTP response from the untrusted backend server and sends it to the client.

In BIG-IP versions 15.0.0-15.1.0.4, 14.1.0-14.1.2.6, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1 and BIG-IQ versions 5.4.0-7.0.0, Self-IP port-lockdown bypass via IPv6 link-local addresses.

In versions 7.1.5-7.1.9, BIG-IP Edge Client Windows Stonewall driver does not sanitize the pointer received from the userland. A local user on the Windows client system can send crafted DeviceIoControl requests to \\.\urvpndrv device causing the Windows kernel to crash.

In versions 16.0.0-16.0.0.1 and 15.1.0-15.1.1, on specific BIG-IP platforms, attackers may be able to obtain TCP sequence numbers from the BIG-IP system that can be reused in future connections with the same source and destination port and IP numbers. Only these platforms are affected: BIG-IP 2000 series (C112), BIG-IP 4000 series (C113), BIG-IP i2000 series (C117), BIG-IP i4000 series (C115), BIG-IP Virtual Edition (VE).

In versions 7.1.5-7.1.8, when a user connects to a VPN using BIG-IP Edge Client over an unsecure network, BIG-IP Edge Client responds to authentication requests over HTTP while sending probes for captive portal detection.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, and 12.1.0-12.1.5.1 and BIG-IQ 5.2.0-7.1.0, when creating a QKView, credentials for binding to LDAP servers used for remote authentication of the BIG-IP administrative interface will not fully obfuscate if they contain whitespace.

In versions 7.1.5-7.1.8, the BIG-IP Edge Client components in BIG-IP APM, Edge Gateway, and FirePass legacy allow attackers to obtain the full session ID from process memory.

On BIG-IP (LTM, AAM, AFM, Analytics, APM, ASM, DNS, FPS, GTM, Link Controller, PEM) versions 15.1.0-15.1.0.5, 14.1.0-14.1.2.3, and 13.1.0-13.1.3.3, when handling MQTT traffic through a BIG-IP virtual server associated with an MQTT profile and an iRule performing manipulations on that traffic, TMM may produce a core file.

In BIG-IP versions 15.1.0-15.1.0.4 and 15.0.0-15.0.1.3 the Certificate Administrator user role and higher privileged roles can perform arbitrary file reads outside of the web root directory.

In BIG-IP versions 15.1.0-15.1.0.4, 15.0.0-15.0.1.3, 14.1.0-14.1.2.3, 13.1.0-13.1.3.4, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.2 and BIG-IQ versions 5.2.0-7.0.0, the host OpenSSH servers utilize keys of less than 2048 bits which are no longer considered secure.

In BIG-IP versions 15.1.0-15.1.0.4, 15.0.0-15.0.1.3, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1, an undisclosed TMUI page contains a vulnerability which allows a stored XSS when BIG-IP systems are setup in a device trust.

In BIG-IP versions 15.0.0-15.1.0.3, 14.1.0-14.1.2.5, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, a Cross-Site Scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Configuration utility.