Platform dependent weakness. This issue only impacts iSeries platforms. On these platforms, in BIG-IP (LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, FPS, GTM, Link Controller, PEM, WebAccelerator) versions 14.0.0-14.1.0.1, 13.0.0-13.1.1.3, and 12.1.1 HF2-12.1.4, the secureKeyCapable attribute was not set which causes secure vault to not use the F5 hardware support to store the unit key. Instead the unit key is stored in plaintext on disk as would be the case for Z100 systems. Additionally this causes the unit key to be stored in UCS files taken on these platforms.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, WebAccelerator and WebSafe software version 13.0.0, 12.0.0 - 12.1.2, 11.6.0 - 11.6.1 and 11.5.0 - 11.5.4, in some circumstances, Traffic Management Microkernel (TMM) does not properly handle certain malformed TLS1.2 records, which allows remote attackers to cause a denial-of-service (DoS) or possible remote command execution on the BIG-IP system.
On the BIG-IP 2000s, 2200s, 4000s, 4200v, i5600, i5800, i7600, i7800, i10600,i10800, and VIPRION 4450 blades, running version 11.5.0, 11.5.1, 11.5.2, 11.5.3, 11.5.4, 11.6.0, 11.6.1, 12.0.0, 12.1.0, 12.1.1 or 12.1.2 of BIG-IP LTM, AAM, AFM, Analytics, ASM, DNS, GTM or PEM, an undisclosed sequence of packets sent to Virtual Servers with client or server SSL profiles may cause disruption of data plane services.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Link Controller, PEM and WebSafe software version 13.0.0 and 12.1.0 - 12.1.2, race conditions in iControl REST may lead to commands being executed with different privilege levels than expected.
On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, when an Internet Content Adaptation Protocol (ICAP) profile is configured on a virtual server, undisclosed traffic can cause an increase in Traffic Management Microkernel (TMM) memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, a directory traversal vulnerability exists in iControl SOAP that allows an authenticated attacker with at least guest role privileges to read wsdl files in the BIG-IP file system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
In F5 BIG-IP 12.0.0-12.1.2, 11.6.0-11.6.1, 11.5.1-11.5.5, or 11.2.1 there is a vulnerability in TMM related to handling of invalid IP addresses.
On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, directory traversal vulnerabilities exist in undisclosed iControl REST endpoints and TMOS Shell (tmsh) commands in F5 BIG-IP Guided Configuration, which may allow an authenticated attacker with at least resource administrator role privileges to read arbitrary files. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0 and 12.1.0 - 12.1.2, malicious requests made to virtual servers with an HTTP profile can cause the TMM to restart. The issue is exposed with BIG-IP APM profiles, regardless of settings. The issue is also exposed with the non-default "normalize URI" configuration options used in iRules and/or BIG-IP LTM policies.
On all versions of 16.1.x, 15.1.x, 14.1.x, 13.1.x, 12.1.x, and 11.6.x of F5 BIG-IP (fixed in 17.0.0), a cross-site request forgery (CSRF) vulnerability exists in an undisclosed page of the BIG-IP Configuration utility. This vulnerability allows an attacker to run a limited set of commands: ping, traceroute, and WOM diagnostics. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
On F5 BIG-IP 13.0.0, 12.1.0-12.1.2, 11.6.0-11.6.3.1, or 11.2.1-11.5.6 a domain name cached within the DNS Cache of TMM may continue to be resolved by the cache even after the parent server revokes the record, if the DNS Cache is receiving a stream of requests for the cached name.
On F5 BIG-IP 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, and F5 BIG-IQ Centralized Management all versions of 8.x and 7.x, when an IPv6 self IP address is configured and the ipv6.strictcompliance database key is enabled (disabled by default) on a BIG-IP system, undisclosed packets may cause decreased performance. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, and F5 BIG-IQ Centralized Management all versions of 8.x and 7.x, an authenticated, high-privileged attacker with no bash access may be able to access Certificate and Key files using Secure Copy (SCP) protocol from a remote system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, a flaw in the way reply ICMP packets are limited in the Traffic Management Microkernel (TMM) allows an attacker to quickly scan open UDP ports. This flaw allows an off-path remote attacker to effectively bypass source port UDP randomization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
In F5 BIG-IP LTM, AAM, AFM, APM, ASM, Link Controller, PEM, PSM software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1, 11.4.0 to 11.5.4, when a virtual server uses the standard configuration of HTTP/2 or SPDY profile with Client SSL profile, and the client initiates a number of concurrent streams beyond the advertised limit can cause a disruption of service. Remote client initiating stream beyond the advertised limit can cause a disruption of service. The Traffic Management Microkernel (TMM) data plane is exposed to this issue; the control plane is not exposed.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, WebAccelerator software version 12.0.0 - 12.1.2, 11.6.0 - 11.6.1, 11.4.0 - 11.5.4, 11.2.1, when ConfigSync is configured, attackers on adjacent networks may be able to bypass the TLS protections usually used to encrypted and authenticate connections to mcpd. This vulnerability may allow remote attackers to cause a denial-of-service (DoS) attack via resource exhaustion.
On F5 BIG-IP 15.1.x versions prior to 15.1.0.2, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, when a DNS listener is configured on a virtual server with DNS queueing (default), undisclosed requests can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and Websafe software version 13.0.0, 12.0.0 to 12.1.2, 11.6.0 to 11.6.1 and 11.5.0 - 11.5.4, an undisclosed sequence of packets sent to BIG-IP High Availability state mirror listeners (primary and/or secondary IP) may cause TMM to restart.
Under certain conditions on F5 BIG-IP 13.0.0, 12.1.0-12.1.2, 11.6.0-11.6.3.1, or 11.5.0-11.5.6, TMM may core while processing SSL forward proxy traffic.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0 and 12.0.0 - 12.1.2, undisclosed traffic patterns sent to BIG-IP virtual servers, with the TCP Fast Open and Tail Loss Probe options enabled in the associated TCP profile, may cause a disruption of service to the Traffic Management Microkernel (TMM).
X509 certificate verification was not correctly implemented in the IP Intelligence Subscription and IP Intelligence feed-list features, and thus the remote server's identity is not properly validated in F5 BIG-IP 12.0.0-12.1.2, 11.6.0-11.6.2, or 11.5.0-11.5.5.
Angelo Prado, Neal Harris and Yoel Gluck reported [1],[2] that SSL/TLS attacks are still viable via a "BREACH" (Browser Reconnaissance & Exfiltration via Adaptive Compression of Hypertext) attack, which they describe as:
While CRIME was mitigated by disabling TLS/SPDY compression (and by modifying gzip to allow for explicit separation of compression contexts in SPDY), BREACH attacks HTTP responses. These are compressed using the common HTTP compression, which is much more common than TLS-level compression. This allows essentially the same attack demonstrated by Duong and Rizzo, but without relying on TLS-level compression (as they anticipated).
BREACH is a category of vulnerabilities and not a specific instance affecting a specific piece of software. To be vulnerable, a web application must:
Be served from a server that uses HTTP-level compression Reflect user-input in HTTP response bodies Reflect a secret (such as a CSRF token) in HTTP response bodies
It is important to note that the attack is agnostic to the version of TLS/SSL, and does not require TLS-layer compression. Additionally, the attack works against any cipher suite. Against a stream cipher, the attack is simpler; the difference in sizes across response bodies is much more granular in this case. If a block cipher is used, additional work must be done to align the output to the cipher text blocks.
CERT has an entry describing the flaw as well [3]. Currently no CVE is assigned as MITRE is attempting to determine whether one CVE will suffice, or whether it will require multiple CVEs (one per affected product). [4]
Mitigations are noted by the researchers as follows
1. Disable HTTP compression. 2. Separate the secrets from the user input. 3. Randomize the secrets in each client request. 4. Mask secrets (effectively randomizing by XORing with a random secret per request). 5. Protect web pages from CSRF attacks. 6. Obfuscate the length of web responses by adding random amounts of arbitrary bytes.
[1] http://breachattack.com/ [2] http://breachattack.com/resources/BREACH%20-%20SSL,%20gone%20in%2030%20seconds.pdf [3] http://www.kb.cert.org/vuls/id/987798 [4] http://www.openwall.com/lists/oss-security/2013/08/07/1
In F5 BIG-IP 12.1.0 through 12.1.2, specific websocket traffic patterns may cause a disruption of service for virtual servers configured to use the websocket profile.
In F5 BIG-IP 11.2.1, 11.4.0 through 11.6.1, and 12.0.0 through 12.1.2, an unauthenticated user with access to the control plane may be able to delete arbitrary files through an undisclosed mechanism.
In F5 BIG-IP 12.1.0 through 12.1.2, permissions enforced by iControl can lag behind the actual permissions assigned to a user if the rolemap is not reloaded between the time the permissions are changed and the time of the user's next request. This is a race condition that occurs rarely in normal usage; the typical period in which this is possible is limited to at most a few seconds after the permission change.
In F5 BIG-IP 12.0.0 through 12.1.2, an authenticated attacker may be able to cause an escalation of privileges through a crafted iControl REST connection.
In F5 BIG-IP systems 12.1.0 - 12.1.2, malicious requests made to virtual servers with an HTTP profile can cause the TMM to restart. The issue is exposed with BIG-IP APM profiles, regardless of settings. The issue is also exposed with the non-default "Normalize URI" configuration options used in iRules and/or BIG-IP LTM policies. An attacker may be able to disrupt traffic or cause the BIG-IP system to fail over to another device in the device group.
A stored cross-site scripting (XSS) vulnerability in the Configuration utility device name change page in BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, PSM, WebAccelerator, WOM and WebSafe version 12.0.0 - 12.1.2, 11.4.0 - 11.6.1, and 11.2.1 allows an authenticated user to inject arbitrary web script or HTML. Exploitation requires Resource Administrator or Administrator privileges, and it could cause the Configuration utility client to become unstable.
In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM, and WebSafe 11.5.1 HF6 through 11.5.4 HF4, 11.6.0 through 11.6.1 HF1, and 12.0.0 through 12.1.2 on VIPRION platforms only, the script which synchronizes SafeNet External Network HSM configuration elements between blades in a clustered deployment will log the HSM partition password in cleartext to the "/var/log/ltm" log file.
In some circumstances, an F5 BIG-IP version 12.0.0 to 12.1.2 and 13.0.0 Azure cloud instance may contain a default administrative password which could be used to remotely log into the BIG-IP system. The impacted administrative account is the Azure instance administrative user that was created at deployment. The root and admin accounts are not vulnerable. An attacker may be able to remotely access the BIG-IP host via SSH.