In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0, 12.1.0 - 12.1.2 and 11.5.1 - 11.6.1, an undisclosed sequence of packets, sourced from an adjacent network may cause TMM to crash.

On BIG-IP 13.1.0-13.1.3.4, 12.1.0-12.1.5.2, and 11.6.1-11.6.5.2, when negotiating IPSec tunnels with configured, authenticated peers, the peer may negotiate a different key length than the BIG-IP configuration would otherwise allow.

On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, a user with the Resource Administrator role is able to overwrite sensitive low-level files (such as /etc/passwd) using SFTP to modify user permissions, without Advanced Shell access. This is contrary to our definition for the Resource Administrator (RA) role restrictions.

In F5 BIG-IP 12.0.0-12.1.2, 11.6.0-11.6.1, 11.5.1-11.5.5, or 11.2.1 there is a vulnerability in TMM related to handling of invalid IP addresses.

When the F5 BIG-IP 12.1.0-12.1.1, 11.6.0-11.6.1, 11.5.1-11.5.5, or 11.2.1 system is configured with a wildcard IPSec tunnel endpoint, it may allow a remote attacker to disrupt or impersonate the tunnels that have completed phase 1 IPSec negotiations. The attacker must possess the necessary credentials to negotiate the phase 1 of the IPSec exchange to exploit this vulnerability; in many environment this limits the attack surface to other endpoints under the same administration.

On F5 BIG-IP 12.1.0-12.1.3.1, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1, carefully crafted URLs can be used to reflect arbitrary content into GeoIP lookup responses, potentially exposing clients to XSS.

On BIG-IP versions 16.0.x before 16.0.1.1, 15.1.x before 15.1.2.1, 14.1.x before 14.1.4, 13.1.x before 13.1.3.6, 12.1.x before 12.1.5.3, and 11.6.x before 11.6.5.3, undisclosed endpoints in iControl REST allow for a reflected XSS attack, which could lead to a complete compromise of the BIG-IP system if the victim user is granted the admin role. This vulnerability is due to an incomplete fix for CVE-2020-5948. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

In BIG-IP versions 15.1.0-15.1.0.4, 15.0.0-15.0.1.3, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1, an undisclosed TMUI page contains a vulnerability which allows a stored XSS when BIG-IP systems are setup in a device trust.

In BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.3, 12.1.0-12.1.3.7, 11.6.1-11.6.3.2, or 11.5.1-11.5.8, when remote authentication is enabled for administrative users and all external users are granted the "guest" role, unsanitized values can be reflected to the client via the login page. This can lead to a cross-site scripting attack against unauthenticated clients.

In version 11.6.1-11.6.5.2 of the BIG-IP system Configuration utility Network > WCCP page, the system does not sanitize all user-provided data before display.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, Websafe software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1, 11.4.0 to 11.5.4, 11.2.1, in some cases TMM may crash when processing TCP traffic. This vulnerability affects TMM via a virtual server configured with TCP profile. Traffic processing is disrupted while Traffic Management Microkernel (TMM) restarts. If the affected BIG-IP system is configured to be part of a device group, it will trigger a failover to the peer device.

In F5 BIG-IP AAM and PEM software version 12.0.0 to 12.1.1, 11.6.0 to 11.6.1, 11.4.1 to 11.5.4, a remote attacker may create maliciously crafted HTTP request to cause Traffic Management Microkernel (TMM) to restart and temporarily fail to process traffic. This issue is exposed on virtual servers using a Policy Enforcement profile or a Web Acceleration profile. Systems that do not have BIG-IP AAM module provisioned are not vulnerable. The Traffic Management Microkernel (TMM) may restart and temporarily fail to process traffic. Systems that do not have BIG-IP AAM or PEM module provisioned are not vulnerable.

F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM, Websafe software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1 are vulnerable to a denial of service attack when the MPTCP option is enabled on a virtual server. Data plane is vulnerable when using the MPTCP option of a TCP profile. There is no control plane exposure. An attacker may be able to disrupt services by causing TMM to restart hence temporarily failing to process traffic.

In F5 BIG-IP LTM, AAM, AFM, APM, ASM, Link Controller, PEM, PSM software version 12.0.0 to 12.1.2, 11.6.0 to 11.6.1, 11.4.0 to 11.5.4, when a virtual server uses the standard configuration of HTTP/2 or SPDY profile with Client SSL profile, and the client initiates a number of concurrent streams beyond the advertised limit can cause a disruption of service. Remote client initiating stream beyond the advertised limit can cause a disruption of service. The Traffic Management Microkernel (TMM) data plane is exposed to this issue; the control plane is not exposed.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, PSM, WebAccelerator, and WebSafe 11.6.1 HF1, 12.0.0 HF3, 12.0.0 HF4, and 12.1.0 through 12.1.2, undisclosed traffic patterns received while software SYN cookie protection is engaged may cause a disruption of service to the Traffic Management Microkernel (TMM) on specific platforms and configurations.

Virtual servers in F5 BIG-IP systems 11.6.1 before 11.6.1 HF1 and 12.1.x before 12.1.2, when configured to parse RADIUS messages via an iRule, allow remote attackers to cause a denial of service (Traffic Management Microkernel restart) via crafted network traffic.

In versions 13.0.0-13.0.0 HF2, 12.1.0-12.1.2 HF1, and 11.6.1-11.6.2, BIG-IP platforms with Cavium Nitrox SSL hardware acceleration cards, a Virtual Server configured with a Client SSL profile, and using Anonymous (ADH) or Ephemeral (DHE) Diffie-Hellman key exchange and Single DH use option not enabled in the options list may be vulnerable to crafted SSL/TLS Handshakes that may result with a PMS (Pre-Master Secret) that starts in a 0 byte and may lead to a recovery of plaintext messages as BIG-IP TLS/SSL ADH/DHE sends different error messages acting as an oracle. Similar error messages when PMS starts with 0 byte coupled with very precise timing measurement observation may also expose this vulnerability.

In BIG-IP versions 15.1.0-15.1.0.4, 15.0.0-15.0.1.3, 14.1.0-14.1.2.3, 13.1.0-13.1.3.4, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.2 and BIG-IQ versions 5.2.0-7.0.0, the host OpenSSH servers utilize keys of less than 2048 bits which are no longer considered secure.

Angelo Prado, Neal Harris and Yoel Gluck reported [1],[2] that SSL/TLS attacks are still viable via a "BREACH" (Browser Reconnaissance & Exfiltration via Adaptive Compression of Hypertext) attack, which they describe as:

While CRIME was mitigated by disabling TLS/SPDY compression (and by modifying gzip to allow for explicit separation of compression contexts in SPDY), BREACH attacks HTTP responses. These are compressed using the common HTTP compression, which is much more common than TLS-level compression. This allows essentially the same attack demonstrated by Duong and Rizzo, but without relying on TLS-level compression (as they anticipated).

BREACH is a category of vulnerabilities and not a specific instance affecting a specific piece of software. To be vulnerable, a web application must:

Be served from a server that uses HTTP-level compression Reflect user-input in HTTP response bodies Reflect a secret (such as a CSRF token) in HTTP response bodies

It is important to note that the attack is agnostic to the version of TLS/SSL, and does not require TLS-layer compression. Additionally, the attack works against any cipher suite. Against a stream cipher, the attack is simpler; the difference in sizes across response bodies is much more granular in this case. If a block cipher is used, additional work must be done to align the output to the cipher text blocks.

CERT has an entry describing the flaw as well [3]. Currently no CVE is assigned as MITRE is attempting to determine whether one CVE will suffice, or whether it will require multiple CVEs (one per affected product). [4]

Mitigations are noted by the researchers as follows

1. Disable HTTP compression. 2. Separate the secrets from the user input. 3. Randomize the secrets in each client request. 4. Mask secrets (effectively randomizing by XORing with a random secret per request). 5. Protect web pages from CSRF attacks. 6. Obfuscate the length of web responses by adding random amounts of arbitrary bytes.

[1] http://breachattack.com/ [2] http://breachattack.com/resources/BREACH%20-%20SSL,%20gone%20in%2030%20seconds.pdf [3] http://www.kb.cert.org/vuls/id/987798 [4] http://www.openwall.com/lists/oss-security/2013/08/07/1

A race condition which may occur when discarding malformed packets can result in BIND exiting due to a REQUIRE assertion failure in dispatch.c. Versions affected: BIND 9.11.0 -> 9.11.7, 9.12.0 -> 9.12.4-P1, 9.14.0 -> 9.14.2. Also all releases of the BIND 9.13 development branch and version 9.15.0 of the BIND 9.15 development branch and BIND Supported Preview Edition versions 9.11.3-S1 -> 9.11.7-S1.

In some circumstances, on F5 BIG-IP systems running 13.0.0, 12.1.0 - 12.1.3.1, any 11.6.x or 11.5.x release, or 11.2.1, TCP DNS profile allows excessive buffering due to lack of flow control.

On F5 BIG-IP systems running 13.0.0, 12.1.0 - 12.1.3.1, or 11.6.1 - 11.6.2, every Multipath TCP (MCTCP) connection established leaks a small amount of memory. Virtual server using TCP profile with Multipath TCP (MCTCP) feature enabled will be affected by this issue.

On all versions of BIG-IP 12.1.x and 11.6.x, the original TLS protocol includes a weakness in the master secret negotiation that is mitigated by the Extended Master Secret (EMS) extension defined in RFC 7627. TLS connections that do not use EMS are vulnerable to man-in-the-middle attacks during renegotiation. Note: Software versions which have reached End of Software Development (EoSD) are not evaluated.

In some cases the MCPD binary cache in F5 BIG-IP devices may allow a user with Advanced Shell access, or privileges to generate a qkview, to temporarily obtain normally unrecoverable information.

In BIG-IP 13.0.0, 12.1.0-12.1.3.7, 11.6.1-11.6.3.2, or 11.5.1-11.5.8, the Application Acceleration Manager (AAM) wamd process used in processing of images and PDFs fails to drop group permissions when executing helper scripts.

A stored cross-site scripting (XSS) vulnerability in the Configuration utility device name change page in BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, PSM, WebAccelerator, WOM and WebSafe version 12.0.0 - 12.1.2, 11.4.0 - 11.6.1, and 11.2.1 allows an authenticated user to inject arbitrary web script or HTML. Exploitation requires Resource Administrator or Administrator privileges, and it could cause the Configuration utility client to become unstable.

In BIG-IP versions 15.0.0-15.1.0.4, 14.1.0-14.1.2.6, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1 and BIG-IQ versions 5.4.0-7.0.0, Self-IP port-lockdown bypass via IPv6 link-local addresses.

On BIG-IP version 16.x before 16.1.0, 15.1.x before 15.1.4.1, 14.1.x before 14.1.4.4, and all versions of 13.1.x, 12.1.x, and 11.6.x, when a FastL4 profile is configured on a virtual server, undisclosed traffic can cause an increase in memory resource utilization. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

On BIG-IP 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, SNMP may expose sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is used with various profile types and is accessed using SNMPv2.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, WebAccelerator software version 12.0.0 - 12.1.2, 11.6.0 - 11.6.1, 11.4.0 - 11.5.4, 11.2.1, when ConfigSync is configured, attackers on adjacent networks may be able to bypass the TLS protections usually used to encrypted and authenticate connections to mcpd. This vulnerability may allow remote attackers to cause a denial-of-service (DoS) attack via resource exhaustion.