In BIG-IP versions 15.1.0-15.1.0.4, 15.0.0-15.0.1.3, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1, an undisclosed TMUI page contains a vulnerability which allows a stored XSS when BIG-IP systems are setup in a device trust.
In versions 7.1.5-7.1.8, the BIG-IP Edge Client components in BIG-IP APM, Edge Gateway, and FirePass legacy allow attackers to obtain the full session ID from process memory.
On BIG-IP 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.6.0-11.6.5.1, the tmm crashes under certain circumstances when using the connector profile if a specific sequence of connections are made.
On BIG-IP versions 15.0.0-15.1.0, 14.0.0-14.1.2.3, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IQ versions 7.0.0, 6.0.0-6.1.0, and 5.0.0-5.4.0, iWorkflow version 2.3.0, and Enterprise Manager version 3.1.1, authenticated users granted TMOS Shell (tmsh) privileges are able access objects on the file system which would normally be disallowed by tmsh restrictions. This allows for authenticated, low privileged attackers to access objects on the file system which would not normally be allowed.
On BIG-IP versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5 and BIG-IQ versions 6.0.0-6.1.0 and 5.2.0-5.4.0, a user is able to obtain the secret that was being used to encrypt a BIG-IP UCS backup file while sending SNMP query to the BIG-IP or BIG-IQ system, however the user can not access to the UCS files.
On BIG-IP versions 15.0.0-15.0.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, the TMM process may restart when the packet filter feature is enabled.
On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5, vCMP hypervisors are incorrectly exposing the plaintext unit key for their vCMP guests on the filesystem.
The BIG-IP 15.0.0-15.0.1, 14.0.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5.1, BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1 configuration utility is vulnerable to Anti DNS Pinning (DNS Rebinding) attack.
A race condition which may occur when discarding malformed packets can result in BIND exiting due to a REQUIRE assertion failure in dispatch.c. Versions affected: BIND 9.11.0 -> 9.11.7, 9.12.0 -> 9.12.4-P1, 9.14.0 -> 9.14.2. Also all releases of the BIND 9.13 development branch and version 9.15.0 of the BIND 9.15 development branch and BIND Supported Preview Edition versions 9.11.3-S1 -> 9.11.7-S1.
On versions 14.0.0-14.1.2, 13.0.0-13.1.3, 12.1.0-12.1.5, and 11.5.1-11.6.5, the BIG-IP system fails to perform Martian Address Filtering (As defined in RFC 1812 section 5.3.7) on the control plane (management interface). This may allow attackers on an adjacent system to force BIG-IP into processing packets with spoofed source addresses.
In BIG-IP 15.0.0, 14.1.0-14.1.0.6, 14.0.0-14.0.0.5, 13.0.0-13.1.1.5, 12.1.0-12.1.4.1, 11.5.1-11.6.4, BIG-IQ 7.0.0, 6.0.0-6.1.0,5.2.0-5.4.0, iWorkflow 2.3.0, and Enterprise Manager 3.1.1, the Configuration utility login page may not follow best security practices when handling a malicious request.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.2, 12.1.0-12.1.4.1, 11.5.2-11.6.4, when processing authentication attempts for control-plane users MCPD leaks a small amount of memory. Under rare conditions attackers with access to the management interface could eventually deplete memory on the system.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, SNMP exposes sensitive configuration objects over insecure transmission channels. This issue is exposed when a passphrase is inserted into various profile types and accessed using SNMPv2.
On BIG-IP 14.1.0-14.1.0.5 and 14.0.0-14.0.0.4, Malformed http requests made to an undisclosed iControl REST endpoint can lead to infinite loop of the restjavad process.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, a high volume of malformed analytics report requests leads to instability in restjavad process. This causes issues with both iControl REST and some portions of TMUI. The attack requires an authenticated user with any role.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.1-11.5.8, when the BIG-IP system is licensed for Appliance mode, a user with either the Administrator or the Resource Administrator role can bypass Appliance mode restrictions.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, under certain circumstances, attackers can decrypt configuration items that are encrypted because the vCMP configuration unit key is generated with insufficient randomness. The attack prerequisite is direct access to encrypted configuration and/or UCS files.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4.1, and 11.5.1-11.6.4, when the BIG-IP system is licensed with Appliance mode, user accounts with Administrator and Resource Administrator roles can bypass Appliance mode restrictions.
On BIG-IP 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.1.4, 12.1.0-12.1.4, and 11.5.1-11.6.4, a reflected cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Traffic Management User Interface (TMUI) also known as the BIG-IP Configuration utility.
On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, users with the Resource Administrator role can modify sensitive portions of the filesystem if provided Advanced Shell Access, such as editing /etc/passwd. This allows modifications to user objects and is contrary to our definition for the Resource Administrator (RA) role restrictions.
On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, a user with the Resource Administrator role is able to overwrite sensitive low-level files (such as /etc/passwd) using SFTP to modify user permissions, without Advanced Shell access. This is contrary to our definition for the Resource Administrator (RA) role restrictions.
On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, and 12.1.0-12.1.4, internal methods used to prevent arbitrary file overwrites in Appliance Mode were not fully effective. An authenticated attacker with a high privilege level may be able to bypass protections implemented in appliance mode to overwrite arbitrary system files.
On BIG-IP 14.0.0-14.1.0.1, 13.0.0-13.1.1.4, 12.1.0-12.1.4, 11.6.1-11.6.3.4, and 11.5.2-11.5.8, Administrator and Resource Administrator roles might exploit TMSH access to bypass Appliance Mode restrictions on BIG-IP systems.
On BIG-IP 11.5.1-11.6.3.4, 12.1.0-12.1.3.7, 13.0.0-13.1.1.3, and 14.0.0-14.0.0.2, when processing certain SNMP requests with a request-id of 0, the snmpd process may leak a small amount of memory.
On BIG-IP 11.5.1-11.5.8, 11.6.1-11.6.3, 12.1.0-12.1.3.6, 13.0.0-13.1.1.1, and 14.0.0-14.0.0.2, under certain conditions, hardware systems with a High-Speed Bridge and using non-default Layer 2 forwarding configurations may experience a lockup of the High-Speed Bridge.
In BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.0.7, 12.1.0-12.1.3.5, 11.6.1-11.6.3.2, or 11.5.1-11.5.8 or Enterprise Manager 3.1.1, malformed requests to the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, may lead to disruption of TMUI services. This attack requires an authenticated user with any role (other than the No Access role). The No Access user role cannot login and does not have the access level to perform the attack.
In BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.3, 12.1.0-12.1.3.7, 11.6.1-11.6.3.2, or 11.5.1-11.5.8, when remote authentication is enabled for administrative users and all external users are granted the "guest" role, unsanitized values can be reflected to the client via the login page. This can lead to a cross-site scripting attack against unauthenticated clients.
On BIG-IP 11.5.1-11.6.3.2, 12.1.3.4-12.1.3.7, 13.0.0 HF1-13.1.1.1, and 14.0.0-14.0.0.2, Multi-Path TCP (MPTCP) does not protect against multiple zero length DATAFINs in the reassembly queue, which can lead to an infinite loop in some circumstances.
A vulnerability was found in OpenSSL 1.0.2. When an application encounters a fatal protocol error and then calls SSLshutdown() twice, OpenSSL can respond differently to the calling application if a 0 byte record is received with invalid padding compared to if a 0 byte record is received with an invalid MAC. This difference in behaviour can be detected by a remote peer, then this amounts to a padding oracle that could be used to decrypt data. In order for this to be exploitable "non-stitched" ciphersuites must be in use. Also the application must call SSLshutdown() twice even if a protocol error has occurred (applications should not do this but some do anyway). AEAD ciphersuites are not impacted. This issue does not impact OpenSSL 1.1.1 or 1.1.0.
Upstream bug: https://www.openssl.org/news/secadv/20190226.txt
Upstream Patch: https://github.com/openssl/openssl/commit/e9bbefbf0f24c57645e7ad6a5a71ae649d18ac8e
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.3, 12.1.0-12.1.3.7, and 11.6.0-11.6.3.2, a reflected Cross Site Scripting (XSS) vulnerability is present in an undisclosed page of the BIG-IP TMUI (Traffic Management User Interface) also known as the BIG-IP configuration utility.