HTTP/2 Rapid reset attack The HTTP/2 protocol allows clients to indicate to the server that a previous stream should be canceled by sending a RSTSTREAM frame. The protocol does not require the client and server to coordinate the cancellation in any way, the client may do it unilaterally. The client may also assume that the cancellation will take effect immediately when the server receives the RSTSTREAM frame, before any other data from that TCP connection is processed.

Abuse of this feature is called a Rapid Reset attack because it relies on the ability for an endpoint to send a RSTSTREAM frame immediately after sending a request frame, which makes the other endpoint start working and then rapidly resets the request. The request is canceled, but leaves the HTTP/2 connection open.

The HTTP/2 Rapid Reset attack built on this capability is simple: The client opens a large number of streams at once as in the standard HTTP/2 attack, but rather than waiting for a response to each request stream from the server or proxy, the client cancels each request immediately.

The ability to reset streams immediately allows each connection to have an indefinite number of requests in flight. By explicitly canceling the requests, the attacker never exceeds the limit on the number of concurrent open streams. The number of in-flight requests is no longer dependent on the round-trip time (RTT), but only on the available network bandwidth.

In a typical HTTP/2 server implementation, the server will still have to do significant amounts of work for canceled requests, such as allocating new stream data structures, parsing the query and doing header decompression, and mapping the URL to a resource. For reverse proxy implementations, the request may be proxied to the backend server before the RSTSTREAM frame is processed. The client on the other hand paid almost no costs for sending the requests. This creates an exploitable cost asymmetry between the server and the client.

Multiple software artifacts implementing HTTP/2 are affected. This advisory was originally ingested from the swift-nio-http2 repo advisory and their original conent follows.

swift-nio-http2 specific advisory swift-nio-http2 is vulnerable to a denial-of-service vulnerability in which a malicious client can create and then reset a large number of HTTP/2 streams in a short period of time. This causes swift-nio-http2 to commit to a large amount of expensive work which it then throws away, including creating entirely new Channels to serve the traffic. This can easily overwhelm an EventLoop and prevent it from making forward progress.

swift-nio-http2 1.28 contains a remediation for this issue that applies reset counter using a sliding window. This constrains the number of stream resets that may occur in a given window of time. Clients violating this limit will have their connections torn down. This allows clients to continue to cancel streams for legitimate reasons, while constraining malicious actors.

An authenticated SQL injection vulnerability exists in the BIG-IP Configuration utility which

may allow an authenticated attacker with network access to the Configuration utility through the BIG-IP management port and/or self IP addresses to execute arbitrary system commands.

Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

On BIG-IP 15.0.0-15.0.1.2, 14.1.0-14.1.2.2, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1 and BIG-IQ 7.0.0, 6.0.0-6.1.0, and 5.2.0-5.4.0, users with non-administrator roles (for example, Guest or Resource Administrator) with tmsh shell access can execute arbitrary commands with elevated privilege via a crafted tmsh command.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2.2, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, undisclosed HTTP behavior may lead to a denial of service.

On F5 BIG-IP 13.1.0-13.1.0.3, 13.0.0, 12.1.0-12.1.3.1, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1 and Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.

On F5 BIG-IP 13.1.0-13.1.0.5, malformed TCP packets sent to a self IP address or a FastL4 virtual server may cause an interruption of service. The control plane is not exposed to this issue. This issue impacts the data plane virtual servers and self IPs.

On F5 BIG-IP 13.1.0-13.1.0.3, 13.0.0, 12.1.0-12.1.3.3, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1, a malformed TLS handshake causes TMM to crash leading to a disruption of service. This issue is only exposed on the data plane when Proxy SSL configuration is enabled. The control plane is not impacted by this issue.

On F5 BIG-IP 13.1.0-13.1.0.5, when Large Receive Offload (LRO) and SYN cookies are enabled (default settings), undisclosed traffic patterns may cause TMM to restart.

On F5 BIG-IP 13.1.0-13.1.0.5, maliciously crafted HTTP/2 request frames can lead to denial of service. There is data plane exposure for virtual servers when the HTTP2 profile is enabled. There is no control plane exposure to this issue.

On F5 BIG-IP 13.1.0-13.1.0.3 or 13.0.0, when authenticated administrative users execute commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.

An integer overflow flaw was found in the way the Linux kernel's networking subsystem processed TCP Selective Acknowledgment (SACK) segments. While processing SACK segments, the Linux kernel's socket buffer (SKB) data structure becomes fragmented. Each fragment is about TCP maximum segment size (MSS) bytes. To efficiently process SACK blocks, the Linux kernel merges multiple fragmented SKBs into one, potentially overflowing the variable holding the number of segments. A remote attacker could use this flaw to crash the Linux kernel by sending a crafted sequence of SACK segments on a TCP connection with small value of TCP MSS, resulting in a denial of service (DoS).

Last updated 24 July 2024

When TCP Verified Accept is enabled on a TCP profile that is configured on a Virtual Server, undisclosed requests can cause an increase in memory resource utilization.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

The Diffie-Hellman Key Agreement Protocol allows remote attackers (from the client side) to send arbitrary numbers that are actually not public keys, and trigger expensive server-side DHE modular-exponentiation calculations, aka a D(HE)at or D(HE)ater attack. The client needs very little CPU resources and network bandwidth. The attack may be more disruptive in cases where a client can require a server to select its largest supported key size. The basic attack scenario is that the client must claim that it can only communicate with DHE, and the server must be configured to allow DHE.

Multiple reflected cross-site scripting (XSS) vulnerabilities exist in undisclosed pages of the BIG-IP Configuration utility that allow an attacker to run JavaScript in the context of the currently logged-in user.

ImageMagick before 7.0.8-50 has a "use of uninitialized value" vulnerability in the function ReadCUTImage in coders/cut.c.

An excessive resource consumption flaw was found in the way the Linux kernel's networking subsystem processed TCP segments. If the Maximum Segment Size (MSS) of a TCP connection was set to low values, such as 48 bytes, it can leave as little as 8 bytes for the user data, which significantly increases the Linux kernel's resource (CPU, Memory, and Bandwidth) utilization. A remote attacker could use this flaw to cause a denial of service (DoS) by repeatedly sending network traffic on a TCP connection with low TCP MSS.

A reflected cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Configuration utility that allows an attacker to run JavaScript in the context of the currently logged-in user.

An authenticated user's session cookie may remain valid for a limited time after logging out from the BIG-IP Configuration utility on a multi-blade VIPRION platform.

When IPsec is configured on a virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.

When a non-admin user has been assigned an administrator role via an iControl REST PUT request and later the user's role is reverted back to a non-admin role via the Configuration utility, tmsh, or iControl REST, the BIG-IP non-admin user can still access the iControl REST admin resource.

The BIG-IP Edge Client Installer on macOS does not follow best practices for elevating privileges during the installation process.

By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743.

An excessive resource consumption flaw was found in the way the Linux kernel's networking subsystem processed TCP Selective Acknowledgment (SACK) segments. While processing SACK segments, the Linux kernel's socket buffer (SKB) data structure becomes fragmented, which leads to increased resource utilization to traverse and process these fragments as further SACK segments are received on the same TCP connection. A remote attacker could use this flaw to cause a denial of service (DoS) by sending a crafted sequence of SACK segments on a TCP connection.

Under certain conditions on F5 BIG-IP 13.1.0-13.1.0.5, 13.0.0, 12.1.0-12.1.3.1, 11.6.0-11.6.3.1, or 11.5.0-11.5.6, TMM may core while processing SSL forward proxy traffic.

Last updated 24 July 2024

On BIG-IP versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, users with access to edit iRules are able to create iRules which can lead to an elevation of privilege, configuration modification, and arbitrary system command execution.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, and 13.1.0-13.1.3.1, under certain conditions tmm may leak memory when processing packet fragments, leading to resource starvation.

On versions 15.0.0-15.0.1.1, 14.1.0-14.1.2.2, 14.0.0-14.0.1, 13.1.0-13.1.3.2, 12.1.0-12.1.5, and 11.5.2-11.6.5.1, BIG-IP virtual servers with Loose Initiation enabled on a FastL4 profile may be subject to excessive flow usage under undisclosed conditions.

On BIG-IP 15.0.0-15.0.1, 14.1.0-14.1.2, 14.0.0-14.0.1, 13.1.0-13.1.3.1, 12.1.0-12.1.5, and 11.5.1-11.6.5.1, undisclosed traffic flow may cause TMM to restart under some circumstances.