BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Link Controller, and PEM 12.0.0 before HF1 on the 2000, 4000, 5000, 7000, and 10000 platforms do not properly sync passwords with the Always-On Management (AOM) subsystem, which might allow remote attackers to obtain login access to AOM via an (1) expired or (2) default password.

A directory traversal vulnerability exists in the BIG-IP Configuration utility that may allow an authenticated attacker to execute commands on the BIG-IP system. For BIG-IP systems running in Appliance mode, a successful exploit can allow the attacker to cross a security boundary.

When running in Appliance mode, and logged into a highly-privileged role, an authenticated remote command injection vulnerability exists in an undisclosed iControl REST endpoint. A successful exploit can allow the attacker to cross a security boundary.

Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A directory traversal vulnerability exists in the BIG-IP Configuration Utility that may allow an authenticated attacker to execute commands on the BIG-IP system. For BIG-IP system running in Appliance mode, a successful exploit can allow the attacker to cross a security boundary.

Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Dear Linux Developers,

We're reaching out to you as part of the disclosure process of our research.

In our research, which we will present at IEEE Security & Privacy in May 2024, we found that attackers can not only create TCP-spoofed connections (which was already known), but can also reliably transmit IP-spoofed data over such connections. This has security implications for applications that rely on TCP endpoint IP addresses, such as firewalling or host-based authentication (e.g., SMTP/SPF, of DBs).

We basically discovered two TCP spoofing primitives. First, attackers can bruteforce the server-chosen send window by acknowledging data that was never sent (what we call "ghost ACKs"; see Figure 3 in the paper). Second, we show that there are side channels that allow the attacker to leak the otherwise-secret server-chosen initial sequence number (ISN). One of these side channels leverages TCP SYN cookies.

We believe that the TCP/IP stack can take countermeasures to prevent such attacks, or at least make them harder. For example, we think that TCP endpoints should ignore ghost ACKs, and have some ideas to randomize the TCP backlog queue to prevent the SYN cookie side channel.

At the same time, we have disclosed our findings to the IETF folks and hope that they have helpful feedback for us.

F5 BIG-IP contains a missing authentication in critical function vulnerability which can allow for remote code execution, creation or deletion of files, or disabling services.

Last updated 13 November 2024

An old inffast.c optimization turns out to not be optimal anymore with modern compilers, and furthermore was not compliant with the C standard, for which decrementing a pointer before its allocated memory is undefined.

External References:

https://wiki.mozilla.org/images/0/09/Zlib-report.pdf https://docs.google.com/document/d/10i1KZS5so8xDqH2rplRa2xet0tyTvvJlLbQQmZIUIKE/edit#heading=h.t13tvnx4loq7

Upstream patch:

https://github.com/madler/zlib/commit/9aaec95e82117c1cb0f9624264c3618fc380cecb

CVE assignment:

http://seclists.org/oss-sec/2016/q4/602

Last updated 11 July 2025

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM, and WebSafe 11.5.1 HF6 through 11.5.4 HF4, 11.6.0 through 11.6.1 HF1, and 12.0.0 through 12.1.2 on VIPRION platforms only, the script which synchronizes SafeNet External Network HSM configuration elements between blades in a clustered deployment will log the HSM partition password in cleartext to the "/var/log/ltm" log file.

In some circumstances, an F5 BIG-IP version 12.0.0 to 12.1.2 and 13.0.0 Azure cloud instance may contain a default administrative password which could be used to remotely log into the BIG-IP system. The impacted administrative account is the Azure instance administrative user that was created at deployment. The root and admin accounts are not vulnerable. An attacker may be able to remotely access the BIG-IP host via SSH.

F5 BIG-IP LTM, Analytics, APM, ASM, and Link Controller 11.2.x before 11.2.1 HF16, 11.3.x, 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1 HF1, and 12.x before 12.0.0 HF3; BIG-IP AAM, AFM, and PEM 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1 HF1, and 12.x before 12.0.0 HF3; BIG-IP DNS 12.x before 12.0.0 HF3; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.2.x before 11.2.1 HF16 and 11.3.0; BIG-IP GTM 11.2.x before 11.2.1 HF16, 11.3.x, 11.4.x, 11.5.x before 11.5.4 HF2, and 11.6.x before 11.6.1 HF1; BIG-IP PSM 11.2.x before 11.2.1 HF16, 11.3.x, and 11.4.0 through 11.4.1; Enterprise Manager 3.1.1; BIG-IQ Cloud and Security 4.0.0 through 4.5.0; BIG-IQ Device 4.2.0 through 4.5.0; BIG-IQ ADC 4.5.0; BIG-IQ Centralized Management 5.0.0; BIG-IQ Cloud and Orchestration 1.0.0; and iWorkflow 2.0.0, when Packet Filtering is enabled on virtual servers and possibly self IP addresses, allow remote attackers to cause a denial of service (Traffic Management Microkernel restart) and possibly have unspecified other impact via crafted network traffic.

BIG-IP configurations using Active Directory, LDAP, or Client Certificate LDAP for management authentication with multiple servers are exposed to a vulnerability which allows an authentication bypass. This can result in a complete compromise of the system. This issue only impacts specific engineering hotfixes using the aforementioned authentication configuration. NOTE: This vulnerability does not affect any of the BIG-IP major, minor or maintenance releases you obtained from downloads.f5.com. The affected Engineering Hotfix builds are as follows: Hotfix-BIGIP-14.1.0.3.0.79.6-ENG.iso, Hotfix-BIGIP-14.1.0.3.0.97.6-ENG.iso, Hotfix-BIGIP-14.1.0.3.0.99.6-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.15.5-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.36.5-ENG.iso, Hotfix-BIGIP-14.1.0.5.0.40.5-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.11.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.14.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.68.9-ENG.iso, Hotfix-BIGIP-14.1.0.6.0.70.9-ENG.iso, Hotfix-BIGIP-14.1.2.0.11.37-ENG.iso, Hotfix-BIGIP-14.1.2.0.18.37-ENG.iso, Hotfix-BIGIP-14.1.2.0.32.37-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.46.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.14.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.16.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.34.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.97.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.99.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.105.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.111.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.115.4-ENG.iso, Hotfix-BIGIP-14.1.2.1.0.122.4-ENG.iso, Hotfix-BIGIP-15.0.1.0.33.11-ENG.iso, Hotfix-BIGIP-15.0.1.0.48.11-ENG.iso

Heap-based buffer overflow in the DHCP client (udhcpc) in BusyBox before 1.25.0 allows remote attackers to have unspecified impact via vectors involving OPTION6RD parsing.

Platform dependent weakness. This issue only impacts iSeries platforms. On these platforms, in BIG-IP (LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, FPS, GTM, Link Controller, PEM, WebAccelerator) versions 14.0.0-14.1.0.1, 13.0.0-13.1.1.3, and 12.1.1 HF2-12.1.4, the secureKeyCapable attribute was not set which causes secure vault to not use the F5 hardware support to store the unit key. Instead the unit key is stored in plaintext on disk as would be the case for Z100 systems. Additionally this causes the unit key to be stored in UCS files taken on these platforms.

In BIG-IP Versions 17.0.x before 17.0.0.1, 16.1.x before 16.1.3.1, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5.1, and all versions of 13.1.x, and BIG-IQ version 8.x before 8.2.0 and all versions of 7.x, an authenticated user's iControl REST token may remain valid for a limited time after logging out from the Configuration utility. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

In BIG-IP versions 15.0.0-15.1.0.3, 14.1.0-14.1.2.5, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1, the Traffic Management User Interface (TMUI), also referred to as the Configuration utility, has a Remote Code Execution (RCE) vulnerability in undisclosed pages.

F5 BIG-IP Configuration utility contains an authentication bypass using an alternate path or channel vulnerability due to undisclosed requests that may allow an unauthenticated attacker with network access to the BIG-IP system through the management port and/or self IP addresses to execute system commands. This vulnerability can be used in conjunction with CVE-2023-46748.

On BIG-IP versions 16.0.0-16.0.0.1, 15.1.0-15.1.0.5, 14.1.0-14.1.2.7, 13.1.0-13.1.3.4, 12.1.0-12.1.5.2, and 11.6.1-11.6.5.2, undisclosed endpoints in iControl REST allow for a reflected XSS attack, which could lead to a complete compromise of the BIG-IP system if the victim user is granted the admin role.

Similar to the issue identified in CVE-2018-12120, on versions 14.1.0-14.1.0.5, 14.0.0-14.0.0.4, 13.0.0-13.1.2, and 12.1.0-12.1.4 BIG-IP will bind a debug nodejs process to all interfaces when invoked. This may expose the process to unauthorized users if the plugin is left in debug mode and the port is accessible.

F5 BIG-IP APM contains a stack-based buffer overflow vulnerability that could allow a threat actor to achieve remote code execution.

In BIG-IP versions 15.0.0-15.1.0.4, 14.1.0-14.1.2.6, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.2, iControl REST does not implement Cross Site Request Forgery protections for users which make use of Basic Authentication in a web browser.

Apache HTTP Server contains an improper escaping of output vulnerability in modrewrite that allows an attacker to map URLs to filesystem locations that are permitted to be served by the server but are not intentionally/directly reachable by any URL, resulting in code execution or source code disclosure.

When running in Appliance mode, a highly privileged authenticated attacker with access to SCP and SFTP may be able to bypass Appliance mode restrictions using undisclosed commands.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A vulnerability exists in an undisclosed iControl REST and BIG-IP TMOS Shell (tmsh) command that may allow an authenticated attacker with at least resource administrator role to execute arbitrary system commands with higher privileges.  A successful exploit can allow the attacker to cross a security boundary.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A vulnerability exists in the iHealth command that may allow an authenticated attacker with at least a resource administrator role to bypass tmsh restrictions and gain access to a bash shell.  For BIG-IP systems running in Appliance mode, a successful exploit can allow the attacker to cross a security boundary.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

On versions 15.0.0-15.1.0.3, 14.1.0-14.1.2.4, 13.1.0-13.1.3.3, 12.1.0-12.1.5.1, and 11.6.1-11.6.5.1, the default deployment mode for BIG-IP high availability (HA) pair mirroring is insecure. This is a control plane issue that is exposed only on the network used for mirroring.

On versions 15.0.0-15.1.0.1, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, and 12.1.0-12.1.5.1, BIG-IP systems set up for connection mirroring in a high availability (HA) pair transfer sensitive cryptographic objects over an insecure communications channel. This is a control plane issue which is exposed only on the network used for connection mirroring.

On versions 15.0.0-15.1.0.1, 14.1.0-14.1.2.3, 13.1.0-13.1.3.3, and 12.1.0-12.1.5.1, BIG-IP systems setup for connection mirroring in a High Availability (HA) pair transfers sensitive cryptographic objects over an insecure communications channel. This is a control plane issue which is exposed only on the network used for connection mirroring.

On versions 15.1.0-15.1.0.1, 15.0.0-15.0.1.2, and 14.1.0-14.1.2.3, BIG-IP Virtual Edition (VE) may expose a mechanism for remote attackers to access local daemons and bypass port lockdown settings.