Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow.

Impact summary: Applications that use OBJobj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service.

A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE.

For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.

The original TLS protocol includes a weakness in master secret negotiation, potentially allowing the Triple Handshake Attack that is mitigated by the Extended Master Secret (EMS) extension defined in RFC 7627.

Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJobj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJobj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n' being the size of the sub-identifiers in bytes (). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJobj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer's certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.

A flaw was found in the Serialization component of OpenJDK. The invokeWriteObject() method of the ObjectStreamClass method failed to catch InstantiationError exception during object stream deserialization, which could cause an unexpected exception to be raised when processing an untrusted serialized input.

It was discovered that the implementation of the PatternSyntaxException class in the Concurrency component of OpenJDK failed to sufficiently validate the 'index' value (to ensure it's not greater than the regular expression length) in the getMessage() method. An instance of the class with invalid index value, for example one created via deserialization on an untrusted input, could cause a Java application to use an excessive amount of memory.

An authenticated attacker with guest privileges or higher can cause the iControl SOAP process to terminate by sending undisclosed requests.

An open redirect vulnerability exists on virtual servers enabled with a BIG-IP APM access policy. This vulnerability allows an unauthenticated malicious attacker to build an open redirect URI.

In BIG-IP versions 17.0.x before 17.0.0.2, 16.1.x before 16.1.3.3, 15.1.x before 15.1.8.1, 14.1.x before 14.1.5.3, and all versions of 13.1.x, and all versions of BIG-IQ 8.x and 7.1.x, incorrect permission assignment vulnerabilities exist in the iControl REST and TMOS shell (tmsh) dig command which may allow an authenticated attacker with resource administrator or administrator role privileges to view sensitive information. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

In BIG-IP versions 17.0.x before 17.0.0.2, and 16.1.x beginning in 16.1.2.2 to before 16.1.3.3, when an HTTP profile is configured on a virtual server and conditions beyond the attacker’s control exist on the target pool member, undisclosed requests sent to the BIG-IP system can cause the Traffic Management Microkernel (TMM) to terminate. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A directory traversal vulnerability exists in an undisclosed page of the BIG-IP Configuration utility that may allow an authenticated attacker to read files with an .xml extension. Access to restricted information is limited and the attacker does not control what information is obtained.

A cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Configuration utility that allows an attacker to run JavaScript in the context of the currently logged-in user.

On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, a directory traversal vulnerability exists in iControl SOAP that allows an authenticated attacker with at least guest role privileges to read wsdl files in the BIG-IP file system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, directory traversal vulnerabilities exist in undisclosed iControl REST endpoints and TMOS Shell (tmsh) commands in F5 BIG-IP Guided Configuration, which may allow an authenticated attacker with at least resource administrator role privileges to read arbitrary files. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

On all versions of 16.1.x, 15.1.x, 14.1.x, 13.1.x, 12.1.x, and 11.6.x of F5 BIG-IP (fixed in 17.0.0), a cross-site request forgery (CSRF) vulnerability exists in an undisclosed page of the BIG-IP Configuration utility. This vulnerability allows an attacker to run a limited set of commands: ping, traceroute, and WOM diagnostics. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

In BIG-IP Versions 17.0.x before 17.0.0.1, 16.1.x before 16.1.3.1, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5.1, and all versions of 13.1.x, and BIG-IQ Centralized Management all versions of 8.x, an authenticated attacker may cause iControl SOAP to become unavailable through undisclosed requests. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

On F5 BIG-IP 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, and F5 BIG-IQ Centralized Management all versions of 8.x and 7.x, when an IPv6 self IP address is configured and the ipv6.strictcompliance database key is enabled (disabled by default) on a BIG-IP system, undisclosed packets may cause decreased performance. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

On F5 BIG-IP 16.1.x versions prior to 16.1.2.2, 15.1.x versions prior to 15.1.5.1, 14.1.x versions prior to 14.1.4.6, 13.1.x versions prior to 13.1.5, and all versions of 12.1.x and 11.6.x, and F5 BIG-IQ Centralized Management all versions of 8.x and 7.x, an authenticated, high-privileged attacker with no bash access may be able to access Certificate and Key files using Secure Copy (SCP) protocol from a remote system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

In BIG-IP Versions 17.0.x before 17.0.0.1, 16.1.x before 16.1.3.1, 15.1.x before 15.1.6.1, 14.1.x before 14.1.5.1, and all versions of 13.1.x, certain iRules commands may allow an attacker to bypass the access control restrictions for a self IP address, regardless of the port lockdown settings. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.