A flaw was found in Node.js versions before 6.15.0, 8.14.0, 10.14.0 and 11.3.0. A hostname spoofing in URL parser for javascript protocol. If a Node.js application is using url.parse() to determine the URL hostname, that hostname can be spoofed by using a mixed case "javascript:" (e.g. "javAscript:") protocol (other protocols are not affected). If security decisions are made about the URL based on the hostname, they may be incorrect.

References: https://nodejs.org/en/blog/vulnerability/november-2018-security-releases/

Excessive time spent in DH check / generation with large Q parameter value

Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow.

Impact summary: Applications that use OBJobj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service.

A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE.

For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.

cURL libcurl could allow a remote attacker to bypass security restrictions, caused by a mixed case flaw when curl is built without PSL support. By sending a specially crafted request, an attacker could exploit this vulnerability to allow a HTTP server to set "super cookies" in curl.

When running in Appliance mode, an authenticated attacker assigned the Administrator role may be able to bypass Appliance mode restrictions utilizing iAppsLX templates on a BIG-IP system.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

BIG-IP or BIG-IQ Resource Administrators and Certificate Managers who have access to the secure copy (scp) utility but do not have access to Advanced Shell (bash) can execute arbitrary commands with a specially crafted command string. This vulnerability is due to an incomplete fix for CVE-2020-5873.

In BIG-IP versions 17.0.x before 17.0.0.1, 16.1.x before 16.1.3.1, 15.1.x before 15.1.7, 14.1.x before 14.1.5.1, and all versions of 13.1.x, and BIG-IQ all versions of 8.x and 7.x, an authenticated iControl REST user can cause an increase in memory resource utilization, via undisclosed requests.

CVE-2023-5981 A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding. CVE-2024-0553 A vulnerability was found in GnuTLS. The response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from the response times of ciphertexts with correct PKCS#1 v1.5 padding. This issue may allow a remote attacker to perform a timing side-channel attack in the RSA-PSK key exchange, potentially leading to the leakage of sensitive data. CVE-2024-0553 is designated as an incomplete resolution for CVE-2023-5981.

A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.

Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DHgeneratekey() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DHcheckpubkey(), DHcheckpubkeyex() or EVPPKEYpubliccheck() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DHcheck() performs all the necessary checks (as of CVE-2023-3817), DHcheckpubkey() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DHgeneratekey() performs a check for an excessively large P, it doesn't check for an excessively large Q. An application that calls DHgeneratekey() or DHcheckpubkey() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DHgeneratekey() and DHcheckpubkey() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DHcheckpubkeyex(), EVPPKEYpubliccheck(), and EVPPKEYgenerate(). Also vulnerable are the OpenSSL pkey command line application when using the "-pubcheck" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.

The original TLS protocol includes a weakness in master secret negotiation, potentially allowing the Triple Handshake Attack that is mitigated by the Extended Master Secret (EMS) extension defined in RFC 7627.

An issue was discovered in function libssh2packetadd in libssh2 1.10.0 allows attackers to access out of bounds memory.

CVE-2018-7167 Calling Buffer.fill() or Buffer.alloc() with some parameters can lead to a hang which could result in a Denial of Service. In order to address this vulnerability, the implementations of Buffer.alloc() and Buffer.fill() were updated so that they zero fill instead of hanging in these cases. All versions of Node.js 6.x (LTS "Boron"), 8.x (LTS "Carbon"), and 9.x are vulnerable. All versions of Node.js 10.x (Current) are NOT vulnerable. CVE-2018-12115 In all versions of Node.js prior to 6.14.4, 8.11.4 and 10.9.0 when used with UCS-2 encoding (recognized by Node.js under the names 'ucs2', 'ucs-2', 'utf16le' and 'utf-16le'), Buffer#write() can be abused to write outside of the bounds of a single Buffer. Writes that start from the second-to-last position of a buffer cause a miscalculation of the maximum length of the input bytes to be written. CVE-2018-12116 Node.js: All versions prior to Node.js 6.15.0 and 8.14.0: HTTP request splitting: If Node.js can be convinced to use unsanitized user-provided Unicode data for the path option of an HTTP request, then data can be provided which will trigger a second, unexpected, and user-defined HTTP request to made to the same server.

An issue in the urllib.parse component of Python before 3.11.4 allows attackers to bypass blocklisting methods by supplying a URL that starts with blank characters.

Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow. Impact summary: Applications that use OBJobj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service. An OBJECT IDENTIFIER is composed of a series of numbers - sub-identifiers - most of which have no size limit. OBJobj2txt() may be used to translate an ASN.1 OBJECT IDENTIFIER given in DER encoding form (using the OpenSSL type ASN1OBJECT) to its canonical numeric text form, which are the sub-identifiers of the OBJECT IDENTIFIER in decimal form, separated by periods. When one of the sub-identifiers in the OBJECT IDENTIFIER is very large (these are sizes that are seen as absurdly large, taking up tens or hundreds of KiBs), the translation to a decimal number in text may take a very long time. The time complexity is O(n^2) with 'n' being the size of the sub-identifiers in bytes (). With OpenSSL 3.0, support to fetch cryptographic algorithms using names / identifiers in string form was introduced. This includes using OBJECT IDENTIFIERs in canonical numeric text form as identifiers for fetching algorithms. Such OBJECT IDENTIFIERs may be received through the ASN.1 structure AlgorithmIdentifier, which is commonly used in multiple protocols to specify what cryptographic algorithm should be used to sign or verify, encrypt or decrypt, or digest passed data. Applications that call OBJobj2txt() directly with untrusted data are affected, with any version of OpenSSL. If the use is for the mere purpose of display, the severity is considered low. In OpenSSL 3.0 and newer, this affects the subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS. It also impacts anything that processes X.509 certificates, including simple things like verifying its signature. The impact on TLS is relatively low, because all versions of OpenSSL have a 100KiB limit on the peer's certificate chain. Additionally, this only impacts clients, or servers that have explicitly enabled client authentication. In OpenSSL 1.1.1 and 1.0.2, this only affects displaying diverse objects, such as X.509 certificates. This is assumed to not happen in such a way that it would cause a Denial of Service, so these versions are considered not affected by this issue in such a way that it would be cause for concern, and the severity is therefore considered low.

An authenticated attacker granted a Viewer or Auditor role on a BIG-IQ can upload arbitrary files using an undisclosed iControl REST endpoint.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

A flaw was found in the Serialization component of OpenJDK. The invokeWriteObject() method of the ObjectStreamClass method failed to catch InstantiationError exception during object stream deserialization, which could cause an unexpected exception to be raised when processing an untrusted serialized input.

It was discovered that the implementation of the PatternSyntaxException class in the Concurrency component of OpenJDK failed to sufficiently validate the 'index' value (to ensure it's not greater than the regular expression length) in the getMessage() method. An instance of the class with invalid index value, for example one created via deserialization on an untrusted input, could cause a Java application to use an excessive amount of memory.