When TCP Verified Accept is enabled on a TCP profile that is configured on a Virtual Server, undisclosed requests can cause an increase in memory resource utilization.  Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

The Diffie-Hellman Key Agreement Protocol allows remote attackers (from the client side) to send arbitrary numbers that are actually not public keys, and trigger expensive server-side DHE modular-exponentiation calculations, aka a D(HE)at or D(HE)ater attack. The client needs very little CPU resources and network bandwidth. The attack may be more disruptive in cases where a client can require a server to select its largest supported key size. The basic attack scenario is that the client must claim that it can only communicate with DHE, and the server must be configured to allow DHE.

Multiple reflected cross-site scripting (XSS) vulnerabilities exist in undisclosed pages of the BIG-IP Configuration utility that allow an attacker to run JavaScript in the context of the currently logged-in user.

A reflected cross-site scripting (XSS) vulnerability exists in an undisclosed page of the BIG-IP Configuration utility that allows an attacker to run JavaScript in the context of the currently logged-in user.

Undisclosed requests can cause the Traffic Management Microkernel (TMM) to terminate when a client-side HTTP/2 profile and the HTTP MRF Router option are enabled for a virtual server and an iRule using the HTTPREQUEST event or Local Traffic Policy are associated with the virtual server. TMM can also terminate when a client-side HTTP/2 profile and the HTTP MRF Router option are enabled, regardless of the presence of the iRule.

An authenticated user's session cookie may remain valid for a limited time after logging out from the BIG-IP Configuration utility on a multi-blade VIPRION platform.

When IPsec is configured on a virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.

When a non-admin user has been assigned an administrator role via an iControl REST PUT request and later the user's role is reverted back to a non-admin role via the Configuration utility, tmsh, or iControl REST, the BIG-IP non-admin user can still access the iControl REST admin resource.

The BIG-IP Edge Client Installer on macOS does not follow best practices for elevating privileges during the installation process.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, WebAccelerator and WebSafe software version 13.0.0, 12.0.0 - 12.1.2, 11.6.0 - 11.6.1 and 11.5.0 - 11.5.4, in some circumstances, Traffic Management Microkernel (TMM) does not properly handle certain malformed TLS1.2 records, which allows remote attackers to cause a denial-of-service (DoS) or possible remote command execution on the BIG-IP system.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Link Controller, PEM and WebSafe software version 13.0.0 and 12.1.0 - 12.1.2, race conditions in iControl REST may lead to commands being executed with different privilege levels than expected.

On F5 BIG-IP 13.0.0, 12.0.0-12.1.3.1, 11.6.0-11.6.2, 11.4.1-11.5.5, or 11.2.1, malformed SPDY or HTTP/2 requests may result in a disruption of service to TMM. Data plane is only exposed when a SPDY or HTTP/2 profile is attached to a virtual server. There is no control plane exposure.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and Websafe software version 12.0.0 to 12.1.1, 11.6.0 to 11.6.1, 11.5.0 - 11.5.4, virtual servers with a configuration using the HTTP Explicit Proxy functionality and/or SOCKS profile are vulnerable to an unauthenticated, remote attack that allows modification of BIG-IP system configuration, extraction of sensitive system files, and/or possible remote command execution on the BIG-IP system.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0 and 12.1.0 - 12.1.2, malicious requests made to virtual servers with an HTTP profile can cause the TMM to restart. The issue is exposed with BIG-IP APM profiles, regardless of settings. The issue is also exposed with the non-default "normalize URI" configuration options used in iRules and/or BIG-IP LTM policies.

On F5 WebSafe Alert Server 1.0.0-4.2.6, a malicious, authenticated user can execute code on the alert server by using a maliciously crafted payload.

Responses to SOCKS proxy requests made through F5 BIG-IP version 13.0.0, 12.0.0-12.1.3.1, 11.6.1-11.6.2, or 11.5.1-11.5.5 may cause a disruption of services provided by TMM. The data plane is impacted and exposed only when a SOCKS proxy profile is attached to a Virtual Server. The control plane is not impacted by this vulnerability.

Under certain conditions for F5 BIG-IP systems 13.0.0 or 12.1.0 - 12.1.3.1, using FastL4 profiles, when the Reassemble IP Fragments option is disabled (default), some specific large fragmented packets may restart the Traffic Management Microkernel (TMM).

F5 BIG-IP 13.0.0-13.1.0.5, 12.1.0-12.1.3.5, or 11.6.0-11.6.3.1 virtual servers with HTTP/2 profiles enabled are vulnerable to "HPACK Bomb".

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and Websafe software version 13.0.0, 12.0.0 to 12.1.2, 11.6.0 to 11.6.1 and 11.5.0 - 11.5.4, an undisclosed sequence of packets sent to BIG-IP High Availability state mirror listeners (primary and/or secondary IP) may cause TMM to restart.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, Edge Gateway, GTM, Link Controller, PEM, WebAccelerator and WebSafe software version 13.0.0, undisclosed requests made to BIG-IP virtual servers which make use of the "HTTP/2 profile" may result in a disruption of service to TMM.

In F5 BIG-IP LTM, AAM, AFM, Analytics, APM, ASM, DNS, GTM, Link Controller, PEM and WebSafe software version 13.0.0, a slow memory leak as a result of undisclosed IPv4 or IPv6 packets sent to BIG-IP management port or self IP addresses may lead to out of memory (OOM) conditions.

The Configuration utility in F5 BIG-IP LTM, Analytics, APM, ASM, GTM, and Link Controller 11.x before 11.2.1 HF16, 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, and 11.6.x before 11.6.1; BIG-IP AAM 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, and 11.6.x before 11.6.1; BIG-IP AFM and PEM 11.3.x, 11.4.x before 11.4.1 HF10, 11.5.x before 11.5.4, and 11.6.x before 11.6.1; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.x before 11.2.1 HF16 and 11.3.0; and BIG-IP PSM 11.x before 11.2.1 HF16, 11.3.x, and 11.4.x before 11.4.1 HF10 allows remote authenticated users with certain permissions to gain privileges by leveraging an Access Policy Manager customization configuration section that allows file uploads.

In F5 BIG-IP 12.1.0 through 12.1.2, specific websocket traffic patterns may cause a disruption of service for virtual servers configured to use the websocket profile.

In F5 BIG-IP 11.2.1, 11.4.0 through 11.6.1, and 12.0.0 through 12.1.2, an unauthenticated user with access to the control plane may be able to delete arbitrary files through an undisclosed mechanism.

In F5 BIG-IP 12.1.0 through 12.1.2, permissions enforced by iControl can lag behind the actual permissions assigned to a user if the rolemap is not reloaded between the time the permissions are changed and the time of the user's next request. This is a race condition that occurs rarely in normal usage; the typical period in which this is possible is limited to at most a few seconds after the permission change.

In F5 BIG-IP 12.0.0 through 12.1.2, an authenticated attacker may be able to cause an escalation of privileges through a crafted iControl REST connection.

The Traffic Management Microkernel (TMM) in F5 BIG-IP before 11.5.4 HF3, 11.6.x before 11.6.1 HF2 and 12.x before 12.1.2 does not properly handle minimum path MTU options for IPv6, which allows remote attackers to cause a denial-of-service (DoS) through unspecified vectors.

The Traffic Management Microkernel (TMM) in F5 BIG-IP LTM, AAM, AFM, APM, ASM, GTM, Link Controller, PEM, PSM, and WebSafe 11.6.0 before 11.6.0 HF6, 11.5.0 before 11.5.3 HF2, and 11.3.0 before 11.4.1 HF10 may suffer from a memory leak while handling certain types of TCP traffic. Remote attackers may cause a denial of service (DoS) by way of a crafted TCP packet.

The default configuration of the IPsec IKE peer listener in F5 BIG-IP LTM, Analytics, APM, ASM, and Link Controller 11.2.1 before HF16, 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF2; BIG-IP AAM, AFM, and PEM 11.4.x, 11.5.x before 11.5.4 HF2, 11.6.x before 11.6.1, and 12.x before 12.0.0 HF2; BIG-IP DNS 12.x before 12.0.0 HF2; BIG-IP Edge Gateway, WebAccelerator, and WOM 11.2.1 before HF16; BIG-IP GTM 11.2.1 before HF16, 11.4.x, 11.5.x before 11.5.4 HF2, and 11.6.x before 11.6.1; and BIG-IP PSM 11.4.0 through 11.4.1 improperly enables the anonymous IPsec IKE peer configuration object, which allows remote attackers to establish an IKE Phase 1 negotiation and possibly conduct brute-force attacks against Phase 2 negotiations via unspecified vectors.

On BIG-IP versions 11.6.0-11.6.2 (fixed in 11.6.2 HF1), 12.0.0-12.1.2 HF1 (fixed in 12.1.2 HF2), or 13.0.0-13.0.0 HF2 (fixed in 13.0.0 HF3) a virtual server configured with a Client SSL profile may be vulnerable to an Adaptive Chosen Ciphertext attack (AKA Bleichenbacher attack) against RSA, which when exploited, may result in plaintext recovery of encrypted messages and/or a Man-in-the-middle (MiTM) attack, despite the attacker not having gained access to the server's private key itself, aka a ROBOT attack.