The ISO-2022 encoding module used a stack buffer sized to MBLENMAX (6 bytes) for intermediate character output. Some ISO-2022 variants can require up to 10 bytes per character, in which case conversions can trigger a stack buffer overflow of up to four bytes.
An application that uses iconv(3) to convert untrusted input to or from one of the affected encodings may be vulnerable to buffer overflows if it uses one of the affected encoding modules.
Several encoding modules, including HZ, UTF-7, VIQR, and ZW, did not properly check the size of the caller-supplied output buffer before writing converted characters.
An application that uses iconv(3) to convert untrusted input to or from one of the affected encodings may be vulnerable to buffer overflows if it uses one of the affected encoding modules.
libcasper(3) communicates with helper processes via UNIX domain sockets, and uses the select(2) system call to wait for data to become available. However, it does not verify that its socket descriptor fits within select(2)'s descriptor set size limit of FDSETSIZE (1024).
An attacker able to cause an application using libcasper(3) to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, may trigger stack corruption. If the target application runs with setuid root privileges, this could be used to escalate local privileges.
When msync(MSINVALIDATE) is called on a mapping of an unmanaged device object, the physical pages in the mapping range are marked invalid but remain in the pager's page list. A subsequent page fault will cause the fault handler to re-insert the page into the object's list. This corrupts the list, and on object destruction the page is freed twice.
An unprivileged local user with access to a device that provides memory-mapped I/O can trigger a use-after-free in the kernel, though this is limited to a pool of objects ("fictitious pages") that are never recycled for a different purpose. It may be possible to exploit this to escalate privileges.
During execve(2) of a SUID binary, the new virtual address space is installed before the process credentials are updated. During this window, a process running as the same user can access the target process's memory via procfs or linprocfs, because the kernel's debugging permission check still saw the original credentials.
An unprivileged local user can exploit this race to modify the address space of a SUID binary before its credentials are elevated, potentially gaining full control of the affected system.
The RTSP handler in libalias rewrote outgoing packets into a fixed-length stack buffer without checking whether the rewritten data fit in the buffer, or whether the result fit back in the original packet.
A host sending crafted RTSP traffic from inside a NAT gateway using libalias can overflow a stack buffer, potentially achieving remote code execution in the kernel (when using ipfw(4) NAT) or in the natd(8) process (which generally runs as the root user).
Pages belonging to largepage shared memory objects were not explicitly wired. When sendfile(2) transmitted such an object with the SFNOCACHE flag, it freed the underlying pages after transmission even though existing mappings still referred to them.
An unprivileged local user can abuse the bug to access freed kernel memory. This can be exploited to escalate privileges.
ptrace(PTSCREMOTE) failed to properly validate parameters for the syscall(2) and syscall(2) meta-system calls. As a result, a user with the ability to debug a process may trigger arbitrary code execution in the kernel, even if the target process has no special privileges.
The missing validation allows an unprivileged local user to escalate privileges, potentially gaining full control of the affected system.
The RACK setsockopt(2) handler drops the connection lock in order to copy option data from userspace, then reacquires the lock. After reacquiring, it verifies that the TCP stack had not been switched away, but did not reload its pointer to the stack's per-connection control block. If userspace switches stacks twice during this window, the check will succeed but the saved pointer will refer to freed memory.
The bug may be exploitable by an unprivileged local user to escalate privileges.
Certain system calls, such open(2) with the OTRUNC flag set, and fspacectl(2), could incorrectly free memory in largepage objects. These operations are not permitted on largepage objects, but the implementation did not verify this.
An unprivileged local user can abuse the bug to access freed kernel memory. This can be exploited to escalate privileges.
The BOOTP file field is written to the lease file without escaping embedded double-quotes, allowing injection of arbitrary dhclient.conf directives. When the lease file is subsequently re-parsed by dhclient, e.g., after a system restart, an attacker-controlled field from the lease is passed to dhclient-script(8), which evaluates it.
A rogue DHCP server may be able to execute arbirary code as root on a system running dhclient.
As dhclient is building an environment to pass to dhclient-script, it may need to resize the array of string pointers. The code which expands the array incorrectly calculates its new size when requesting memory, resulting in a heap buffer overrun.
A specially crafted packet can cause dhclient to overrun its buffer of environment entries. This can result in a crash, but it may be possible to leverage this bug to achieve remote code execution.
When processing the header of an incoming message, libnv failed to properly validate the message size.
The lack of validation allows a malicious program to write outside the bounds of a heap allocation. This can trigger a crash or system panic, and it may be possible for an unprivileged user to exploit the bug to elevate their privileges.
An operator precedence bug in the kernel results in a scenario where a buffer overflow causes attacker-controlled data to overwrite adjacent execve(2) argument buffers.
The bug may be exploitable by an unprivileged user to obtain superuser privileges.
When exchanging data over a socket, libnv uses select(2) to wait for data to arrive. However, it does not verify whether the provided socket descriptor fits in select(2)'s file descriptor set size limit of FDSETSIZE (1024).
An attacker who is able to force a libnv application to allocate large file descriptors, e.g., by opening many descriptors and executing a program which is not careful to close them upon startup, can trigger stack corruption. If the target application is setuid-root, then this could be used to elevate local privileges.
The setcred(2) system call is only available to privileged users. However, before the privilege level of the caller is checked, the user-supplied list of supplementary groups is copied into a fixed-size kernel stack buffer without first validating its length. If the supplied list exceeds the capacity of that buffer, a stack buffer overflow occurs.
Because the bounds check on the supplementary groups list occurs after the kernel stack buffer has already been written, an unprivileged local user may trigger the overflow without holding any special privilege. Successful exploitation may allow an attacker to execute arbitrary code in the context of the kernel, allowing an unprivileged local user to gain elevated privileges on the affected system.
A file descriptor can be closed while a thread is blocked in a poll(2) or select(2) call waiting for that descriptor. Because the blocked thread does not hold a reference to the underlying object, this closure may result in the object being freed while the thread remains blocked. In this situation, the kernel must remove the blocked thread from the per-object wait queue prior to freeing the object.
In the case of some file descriptor types, the kernel failed to unlink blocked threads from the object before freeing it. When the blocked thread is subsequently woken, it accesses memory that has already been freed resulting in a use-after-free vulnerability.
The use-after-free vulnerability may be triggered by an unprivileged local user and can be exploited to obtain superuser privileges.
The KTLS receive path decrypted each record in place, assuming that the mbufs holding received data were anonymous and safe to modify. This assumption does not hold for data placed on a socket by sendfile(2), which can reference file-backed memory directly through non-anonymous MEXTPG pages or EXTSFBUF mbufs. When the sender transmits such data over a loopback connection without enabling KTLS on the transmit side, the file-backed mbufs reach the receiver's decryption path unchanged. Decrypting a record in place then overwrites the backing file's page cache instead of a private copy of the data.
An unprivileged local user who can read a file can overwrite its contents with data of their choosing by sending the file over a loopback connection on which they have enabled KTLS receive. The write modifies the page cache directly, so it bypasses file flags such as schg and is written back to disk. By overwriting a setuid binary or other trusted file, a local user can escalate privileges, potentially gaining full control of the affected system.
dspmmapsingle() validated the requested mapping by checking the sum of the user-supplied offset and length against the buffer size. This addition could overflow, so that a large offset and length wrapped around and passed the check. The offset was then narrowed from 64 to 32 bits when converted to a buffer address, yielding a mapping that extended past the audio buffer into unrelated kernel memory.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS).
The kernel handler for IPV6MSFILTER dropped a serializing lock in order to copy the source-filter list from userspace, then reacquired the lock. During this window another thread could free the multicast filter structure, leaving the handler with a stale pointer to freed memory.
An unprivileged local user can exploit this use-after-free to escalate privileges.
The ELF image activator cleared per-process ASLR preference flags for setuid binaries after the code that computes the PIE base address, rather than before. As a result, a user-requested ASLR disable was still in effect at the point where the base address was chosen.
An unprivileged local user can disable ASLR for a setuid PIE binary by calling procctl(2) before execve(2). This makes exploitation of any separate memory corruption vulnerability in that binary significantly easier.
The CONSHISTORY ioctl handler did not adequately validate the requested history size. A large value caused an integer overflow in the buffer size calculation, resulting in a heap allocation smaller than expected. Subsequent initialization of the buffer wrote beyond the end of the allocation.
An unprivileged local user with access to a vt(4) device can trigger an out-of-bounds write in the kernel, potentially escalating privileges.
The ZFSIOCUSERSPACEMANY ioctl, used by zfs-userspace(8), truncated a 64-bit output buffer size to a 32-bit integer for the kernel allocation, but used the original 64-bit size as the buffer limit when writing records.
A local user with the "userused" delegated ZFS permission can trigger a kernel heap overflow via the ZFSIOCUSERSPACEMANY ioctl, potentially escalating privileges.
The ZFSIOCRECVNEW ioctl, in the heal receive path, similarly truncated a 64-bit payload size to a 32-bit integer for allocation, then used the original 64-bit size as the length for a byteswap operation.
A local user with the "receive" delegated ZFS permission can trigger kernel memory corruption via ZFSIOCRECVNEW by sending a crafted receive stream in heal mode.
Incorrect packet validation allowed unbounded recursion parsing SCTP chunk parameters. This can eventually result in a stack overflow and panic.
Remote attackers can craft packets which cause affected systems to panic. This affects any system where pf is configured to process traffic, independent of the configured ruleset.
When bsdinstall or bsdconfig are prompted to scan for nearby Wi-Fi networks, they build up a list of network names and use bsddialog(1) to prompt the user to select a network. This is implemented using a shell script, and the code which handled network names was not careful to prevent expansion by the shell. As a result, a suitably crafted network name can be used to execute commands via a subshell.
The problem can be exploited to execute code as root on the system running bsdinstall or bsdconfig. The attacker would need to create an access point with a specially crafted name and be within range of a Wi-Fi scan. Note that bsdinstall and bsdconfig are vulnerable as soon as the user prompts them to scan for nearby networks; they do not need to actually select the malicious network.
The Linuxulator determined whether a binary was set-user-ID or set-group-ID by checking the PSUGID process flag. During execve(2), this flag is not yet set at the point where the auxiliary vector is constructed, so ATSECURE was incorrectly set to zero for set-user-ID and set-group-ID executables.
An unprivileged local user can inject a shared library via LDPRELOAD into a set-user-ID or set-group-ID Linux binary, gaining the privileges of that binary.
The kernel function that implements unlinkat(2) and funlinkat(2) validated the ATRESOLVEBENEATH flag but failed to pass it through to the underlying path lookup. The flag was silently dropped, so path resolution was not actually restricted.
A process that uses ATRESOLVEBENEATH with unlinkat(2) or funlinkat(2) to confine path resolution can in fact resolve paths above the starting directory. A caller relying on this flag for path containment may delete files outside the intended directory tree.
Second, the audio buffer backing a mapping could be freed when the device was closed even though the mapping remained valid. The freed memory could then be reused elsewhere while still accessible through the stale mapping.
The /dev/dsp device nodes are world-accessible by default. On a system with an audio device, either issue allows an unprivileged local user to read and write kernel memory, which can be used to escalate privileges, potentially gaining full control of the affected system. At a minimum, an attacker can crash the kernel, resulting in a Denial of Service (DoS).
In the case of the capnet service, when a key present in the old limit was omitted from the new limit, the missing key was treated as "allow any" instead of being rejected.
In certain scenarios, an application that had previously restricted a subset of network operations could ask for a new limit that extended the permissions of the process.