Where
AND
-Infinity
0
Severity
10
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H

Due to a Missing Authorization weakness and Insufficient Granularity of Access Control in a specific device configuration, a vulnerability exists in Juniper Networks Junos OS on SRX Series whereby an attacker who attempts to access J-Web administrative interfaces can successfully do so from any device interface regardless of the web-management configuration and filter rules which may otherwise protect access to J-Web. This issue affects: Juniper Networks Junos OS SRX Series 20.4 version 20.4R1 and later versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1.

Remedy

The following software releases have been updated to resolve this specific issue: 20.4R2-S1, 20.4R3, 21.1R1-S1, 21.1R2, 21.2R1, and all subsequent releases.
First published (updated )
Severity
9.8
Input Validation
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

An Improper Input Validation vulnerability in the J-Web component of Juniper Networks Junos OS may allow an unauthenticated attacker to access data without proper authorization. Utilizing a crafted POST request, deserialization may occur which could lead to unauthorized local file access or the ability to execute arbitrary commands. This issue affects Juniper Networks Junos OS: all versions prior to 19.1R3-S9; 19.2 versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R2-S7, 19.4R3-S9; 20.1 versions prior to 20.1R3-S5; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S2; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R2-S2, 21.3R3; 21.4 versions prior to 21.4R1-S2, 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R1-S1, 22.1R2.

Remedy

The following software releases have been updated to resolve this specific issue: 19.1R3-S9, 19.2R3-S6, 19.3R3-S7, 19.4R2-S7, 19.4R3-S9, 20.1R3-S5, 20.2R3-S5, 20.3R3-S5, 20.4R3-S4, 21.1R3-S2, 21.2R3-S1, 21.3R2-S2, 21.3R3, 21.4R1-S2, 21.4R2-S1, 21.4R3, 22.1R1-S1, 22.1R2, 22.2R1, and all subsequent releases.
First published (updated )
Severity
9.8
Malicious File Upload
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

An Improper Authentication vulnerability in upload-file.php, used by the J-Web component of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to upload arbitrary files to temporary folders on the device. This issue affects Juniper Networks Junos OS: All versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions; 20.2 versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions; 20.4 versions prior to 20.4R3-S6; 21.1 version 21.1R1 and later versions; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 19.4R3-S11, 20.2R3-S7, 20.4R3-S6, 21.2R3-S4, 21.3R3-S3, 21.4R3-S3, 22.1R3-S1, 22.2R2-S1, 22.2R3, 22.3R1-S2, 22.3R2, 22.4R1, 22.4R2, 23.1R1, and all subsequent releases.
First published (updated )
Severity
9.3
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:L/A:N

A traffic classification vulnerability in Juniper Networks Junos OS on the SRX Series Services Gateways may allow an attacker to bypass Juniper Deep Packet Inspection (JDPI) rules and access unauthorized networks or resources, when 'no-syn-check' is enabled on the device. JDPI incorrectly classifies out-of-state asymmetric TCP flows as the dynamic-application INCONCLUSIVE instead of UNKNOWN, which is more permissive, causing the firewall to allow traffic to be forwarded that should have been denied. This issue only occurs when 'set security flow tcp-session no-syn-check' is configured on the device. This issue affects Juniper Networks Junos OS on SRX Series: 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S2; 19.4 versions prior to 19.4R2-S5, 19.4R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3; 20.2 versions prior to 20.2R3-S1; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 18.4R1.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 18.4R2-S9, 18.4R3-S9, 19.1R2-S3, 19.1R3-S6, 19.2R1-S7, 19.2R3-S3, 19.3R2-S6, 19.3R3-S2, 19.4R2-S5, 19.4R3-S3, 20.1R2-S2, 20.1R3, 20.2R3-S1, 20.3R3, 20.4R2-S1, 20.4R3, 21.1R1-S1, 21.1R2, 21.2R1, and all subsequent releases.
First published (updated )
Severity
9
Input Validation
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

An Improper Input Validation vulnerability in J-Web of Juniper Networks Junos OS allows a locally authenticated J-Web attacker to escalate their privileges to root over the target device. This issue affects: Juniper Networks Junos OS All versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R3-S3; 19.3 versions prior to 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2;

Remedy

The following software releases have been updated to resolve this specific issue: 18.3R3-S5, 18.4R3-S9, 19.1R3-S6, 19.2R3-S3, 19.3R3-S3, 19.4R3-S5, 20.1R3-S1, 20.2R3-S2, 20.3R3-S1, 20.4R3, 21.1R2, 21.1R3, 21.2R1-S1, 21.2R2, 21.3R1, and all subsequent releases.
First published (updated )
Severity
8.8
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

An Unchecked Return Value vulnerability in the user interfaces to the Juniper Networks Junos OS and Junos OS Evolved, the CLI, the XML API, the XML Management Protocol, the NETCONF Management Protocol, the gNMI interfaces, and the J-Web User Interfaces causes unintended effects such as demotion or elevation of privileges associated with an operators actions to occur.

Multiple scenarios may occur; for example: privilege escalation over the device or another account, access to files that should not otherwise be accessible, files not being accessible where they should be accessible, code expected to run as non-root may run as root, and so forth.

This issue affects:

Juniper Networks Junos OS

All versions prior to 20.4R3-S7; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S5; 21.3 versions prior to 21.3R3-S4; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S2; 22.2 versions prior to 22.2R2-S2, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.

Juniper Networks Junos OS Evolved

All versions prior to 21.4R3-S3-EVO; 22.1-EVO version 22.1R1-EVO and later versions prior to 22.2R2-S2-EVO, 22.2R3-EVO; 22.3-EVO versions prior to 22.3R1-S2-EVO, 22.3R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS: 20.4R3-S7, 21.1R3-S5, 21.2R3-S4, 21.2R3-S5, 21.3R3-S4, 21.4R3-S3, 22.1R3-S2, 22.2R2-S2, 22.2R3, 22.3R1-S2, 22.3R2, 22.3R3, 22.4R1, and all subsequent releases. Junos OS Evolved: 21.4R3-S3-EVO, 22.2R2-S2-EVO, 22.2R3-EVO, 22.3R1-S2-EVO, 22.3R2-EVO, 22.4R1-EVO, and all subsequent releases.
First published (updated )
Severity
8.8
CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

An Out Of Bounds (OOB) access vulnerability in the handling of responses by a Juniper Agile License (JAL) Client in Juniper Networks Junos OS and Junos OS Evolved, configured in Network Mode (to use Juniper Agile License Manager) may allow an attacker to cause a partial Denial of Service (DoS), or lead to remote code execution (RCE). The vulnerability exists in the packet parsing logic on the client that processes the response from the server using a custom protocol. An attacker with control of a JAL License Manager, or with access to the local broadcast domain, may be able to spoof a new JAL License Manager and/or craft a response to the Junos OS License Client, leading to exploitation of this vulnerability. This issue only affects Junos systems configured in Network Mode. Systems that are configured in Standalone Mode (the default mode of operation for all systems) are not vulnerable to this issue. This issue affects: Juniper Networks Junos OS: 19.2 versions prior to 19.2R3-S3; 19.3 versions prior to 19.3R3-S3; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2. Juniper Networks Junos OS Evolved: version 20.1R1-EVO and later versions, prior to 21.2R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 19.2R1.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 19.3R3-S3, 20.1R2-S2, 20.1R3-S1, 20.2R3-S2, 20.3R3, 20.4R3, 21.1R2, 21.2R1, and all subsequent releases. Junos OS Evolved 21.2R2-EVO, 21.3R1-EVO, and all subsequent releases.
First published (updated )
Severity
8.8
Path Traversal
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

An Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in J-Web of Juniper Networks Junos OS allows any low-privileged authenticated attacker to elevate their privileges to root. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S19; 15.1 versions prior to 15.1R7-S10; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2.

Remedy

The following software releases have been updated to resolve this specific issue: 12.3R12-S19, 15.1R7-S10, 18.3R3-S5, 18.4R3-S9, 19.1R3-S6, 19.2R1-S7, 19.2R3-S3, 19.3R3-S3, 19.4R3-S5, 20.1R2-S2, 20.1R3-S1, 20.2R3-S2, 20.3R3, 20.4R2-S1, 20.4R3, 21.1R1-S1, 21.1R2, 21.2R1, and all subsequent releases.
First published (updated )
Severity
8.8
Input Validation
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

An Improper Input Validation vulnerability in J-Web of Juniper Networks Junos OS allows a locally authenticated attacker to escalate their privileges to root over the target device. junos:18.3R3-S5 junos:18.4R3-S9 junos:19.1R3-S6 junos:19.3R2-S6 junos:19.3R3-S3 junos:19.4R1-S4 junos:19.4R3-S4 junos:20.1R2-S2 junos:20.1R3 junos:20.2R3-S1 junos:20.3X75-D20 junos:20.3X75-D30 junos:20.4R2-S1 junos:20.4R3 junos:21.1R1-S1 junos:21.1R2 junos:21.2R1 junos:21.3R1 This issue affects: Juniper Networks Junos OS 19.3 versions 19.3R1 and above prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2. This issue does not affect Juniper Networks Junos OS versions prior to 19.3R1.

Remedy

The following software releases have been updated to resolve this specific issue: 19.3R2-S6, 19.3R3-S3, 19.4R3-S5, 20.1R2-S2, 20.1R3-S1, 20.2R3-S2, 20.3R3, 20.4R2-S1, 20.4R3, 21.1R1-S1, 21.1R2, 21.2R1, and all subsequent releases. In addition to the above fixed releases, for the following not-affected releases additional security enhancements were included in Junos OS 18.3R3-S5, 18.4R3-S9, 19.1R3-S6 as a result of resolving this issue.
First published (updated )
Severity
8.8
XSS
CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N

A Cross-site Scripting (XSS) vulnerability in Juniper Networks Junos OS J-Web allows an attacker to construct a URL that when visited by another user enables the attacker to execute commands with the target's permissions, including an administrator. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S19; 15.1 versions prior to 15.1R7-S10; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S10, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S6; 19.2 versions prior to 19.2R1-S8, 19.2R3-S3; 19.3 versions prior to 19.3R2-S6, 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S2; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2; 21.2 versions prior to 21.2R1-S1, 21.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: 12.3R12-S19, 15.1R7-S10, 18.3R3-S5, 18.4R2-S10, 18.4R3-S9, 19.1R2-S3, 19.1R3-S6, 19.2R1-S8, 19.2R3-S3, 19.3R2-S6, 19.3R3-S3, 19.4R3-S5, 20.1R3-S2, 20.2R3-S2, 20.3R3, 20.4R2-S2, 20.4R3, 21.1R1-S1, 21.1R2, 21.2R1-S1, 21.2R2, 21.3R1, and all subsequent releases.
First published (updated )
Severity
8.8
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

A PHP Local File Inclusion (LFI) vulnerability in the J-Web component of Juniper Networks Junos OS may allow a low-privileged authenticated attacker to execute an untrusted PHP file. By chaining this vulnerability with other unspecified vulnerabilities, and by circumventing existing attack requirements, successful exploitation could lead to a complete system compromise. This issue affects Juniper Networks Junos OS: all versions prior to 19.1R3-S9; 19.2 versions prior to 19.2R3-S6; 19.3 versions prior to 19.3R3-S6; 19.4 versions prior to 19.4R2-S7, 19.4R3-S8; 20.1 versions prior to 20.1R3-S5; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S2; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R2-S2, 21.3R3; 21.4 versions prior to 21.4R1-S2, 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R1-S1, 22.1R2.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 19.1R3-S9, 19.2R3-S6, 19.3R3-S6, 19.4R2-S7, 19.4R3-S8, 20.1R3-S5, 20.2R3-S5, 20.3R3-S5, 20.4R3-S4, 21.1R3-S2, 21.2R3-S1, 21.3R2-S2, 21.3R3, 21.4R1-S2, 21.4R2-S1, 21.4R3, 22.1R1-S1, 22.1R2, 22.2R1, and all subsequent releases.
First published (updated )
Severity
8.4
CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

An Incorrect Default Permissions vulnerability in Juniper Networks Junos OS allows an unauthenticated attacker with local access to the device to create a backdoor with root privileges. The issue is caused by improper directory permissions on a certain system directory, allowing an attacker with access to this directory to create a backdoor with root privileges.

This issue affects Juniper Networks Junos OS:

All versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S1.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 20.4R3-S5, 21.1R3-S4, 21.2R3-S4, 21.3R3-S3, 21.4R3-S1, 22.1R1, and all subsequent releases.
First published (updated )
Severity
8
XSS
CVSS:3.1/AV:N/AC:L/PR:L/UI:R/S:C/C:L/I:L/A:N

A persistent cross-site scripting (XSS) vulnerability in the captive portal graphical user interface of Juniper Networks Junos OS may allow a remote authenticated user to inject web script or HTML and steal sensitive data and credentials from a web administration session, possibly tricking a follow-on administrative user to perform administrative actions on the device. This issue affects Juniper Networks Junos OS: All versions, including the following supported releases: 12.3X48 versions prior to 12.3X48-D105; 15.1X49 versions prior to 15.1X49-D220; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R3-S9; 19.1 versions prior to 19.1R3-S7; 19.2 versions prior to 19.2R3-S3; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R3-S6; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R1-S1, 20.2R2; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R2; 21.1 versions prior to 21.1R2.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 12.3X48-D105, 15.1X49-D220, 18.3R3-S5, 18.4R3-S9, 19.1R3-S7, 19.2R3-S3, 19.3R3-S4, 19.4R3-S6, 20.1R3, 20.2R1-S1, 20.2R2, 20.3R2, 20.4R2, 21.1R2, 21.2R1 and all subsequent releases. Additionally, after performing an upgrade to a resolved release, additional steps must be taken to ensure that all stored malicious scripts are removed from the configuration.
First published (updated )
Severity
7.8
Buffer Overflow
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A buffer overflow vulnerability in the TCP/IP stack of Juniper Networks Junos OS allows an attacker to send specific sequences of packets to the device thereby causing a Denial of Service (DoS). By repeatedly sending these sequences of packets to the device, an attacker can sustain the Denial of Service (DoS) condition. The device will abnormally shut down as a result of these sent packets. A potential indicator of compromise will be the following message in the log files: "eventd[13955]: SYSTEMABNORMALSHUTDOWN: System abnormally shut down" These issue are only triggered by traffic destined to the device. Transit traffic will not trigger these issues. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S19; 15.1 versions prior to 15.1R7-S10; 16.1 version 16.1R1 and later versions; 16.2 version 16.2R1 and later versions; 17.1 version 17.1R1 and later versions; 17.2 version 17.2R1 and later versions; 17.3 versions prior to 17.3R3-S12; 17.4 version 17.4R1 and later versions; 18.1 versions prior to 18.1R3-S13; 18.2 version 18.2R1 and later versions; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R3-S6; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R2-S2, 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2-S1, 20.4R3; 21.1 versions prior to 21.1R1-S1, 21.1R2; 21.2 versions prior to 21.2R1-S1, 21.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: 12.3R12-S19, 15.1R7-S10, 17.3R3-S12, 18.1R3-S13, 18.3R3-S5, 18.4R2-S9, 18.4R3-S9, 19.1R3-S6, 19.2R1-S7, 19.2R3-S3, 19.3R2-S7, 19.3R3-S3, 19.4R3-S5, 20.1R2-S2, 20.1R3-S1, 20.2R3-S2, 20.3R3, 20.4R2-S1, 20.4R3, 21.1R1-S1, 21.1R2, 21.2R1-S1, 21.2R2, 21.3R1, and all subsequent releases.
First published (updated )
Severity
7.8
Buffer Overflow
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A buffer overflow vulnerability in the TCP/IP stack of Juniper Networks Junos OS allows an attacker to send specific sequences of packets to the device thereby causing a Denial of Service (DoS). By repeatedly sending these sequences of packets to the device, an attacker can sustain the Denial of Service (DoS) condition. The device will abnormally shut down as a result of these sent packets. A potential indicator of compromise will be the following message in the log files: "eventd[13955]: SYSTEMABNORMALSHUTDOWN: System abnormally shut down" This issue is only triggered by traffic destined to the device. Transit traffic will not trigger this issue. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S19; 15.1 versions prior to 15.1R7-S10; 17.3 versions prior to 17.3R3-S12; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S3; 19.4 versions prior to 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R2; 21.2 versions prior to 21.2R1-S1, 21.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: 12.3R12-S19, 15.1R7-S10, 17.3R3-S12, 18.4R2-S9, 18.4R3-S9, 19.1R3-S7, 19.2R1-S7, 19.2R3-S3, 19.3R2-S7, 19.3R3-S3, 19.4R3-S5, 20.1R3-S1, 20.2R3-S2, 20.3R3-S1, 20.4R2-S2, 20.4R3, 21.1R2, 21.2R1-S1, 21.2R2, 21.3R1, and all subsequent releases.
First published (updated )
Severity
7.5
Input Validation
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Input Validation vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS).

When certain specific crafted BGP UPDATE messages are received over an established BGP session, one BGP session may be torn down with an UPDATE message error, or the issue may propagate beyond the local system which will remain non-impacted, but may affect one or more remote systems. This issue is exploitable remotely as the crafted UPDATE message can propagate through unaffected systems and intermediate BGP speakers. Continuous receipt of the crafted BGP UPDATE messages will create a sustained Denial of Service (DoS) condition for impacted devices.

This issue affects eBGP and iBGP, in both IPv4 and IPv6 implementations. This issue requires a remote attacker to have at least one established BGP session.

1 / 2

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS: 20.4R3-S10, 21.2R3-S7, 21.3R3-S5, 21.4R3-S5 or 21.4R3-S7, 22.1R3-S4, 22.2R3-S3, 22.3R3-S1, 22.4R3, 23.2R2, 23.3R2, 23.4R1, and all subsequent releases Note: except for Junos OS 21.4R3-S6 which is affected and unfixed. Junos OS Evolved: 20.4R3-S10-EVO, 21.2R3-S7-EVO, 21.3R3-S5-EVO, 21.4R3-S5-EVO, 22.1R3-S4-EVO, 22.2R3-S3-EVO, 22.3R3-S1-EVO, 22.4R3-EVO, 23.2R2-EVO, 23.4R1-EVO, and all subsequent releases. It is important that customers implement the workaround in addition to taking any updated software as these crafted UPDATE messages may be propagated to other devices even if non-impacted locally, thereby protecting the network by stopping the propagation of these crafted UPDATE messages. The workaround is to configure BGP error tolerance by way of:   [ protocols bgp bgp-error-tolerance ... ] Additional details can be found at https://www.juniper.net/documentation/us/en/software/junos/bgp/topics/topic-map/bgp-error-messages.h... https://www.juniper.net/documentation/us/en/software/junos/bgp/topics/topic-map/bgp-error-messages.html Juniper considers configuring this option to be a Best Common Practice (BCP) as it not only prevents this issue from happening, but protects against similar issues as well. This issue is being tracked as PR 1709837 https://prsearch.juniper.net/problemreport/PR1709837  which is visible on the Customer Support website. Note: Juniper SIRT's policy https://kb.juniper.net/KB16765  is not to evaluate releases which are beyond End of Engineering (EOE) or End of Life (EOL).
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Handling of Exceptional Conditions vulnerability in AS PATH processing of Juniper Networks Junos OS and Junos OS Evolved allows an attacker to send a BGP update message with an AS PATH containing a large number of 4-byte ASes, leading to a Denial of Service (DoS). Continued receipt and processing of these BGP updates will create a sustained Denial of Service (DoS) condition.

This issue is hit when the router has Non-Stop Routing (NSR) enabled, has a non-4-byte-AS capable BGP neighbor, receives a BGP update message with a prefix that includes a long AS PATH containing large number of 4-byte ASes, and has to advertise the prefix towards the non-4-byte-AS capable BGP neighbor.

Note: NSR is not supported on the SRX Series and is therefore not affected by this vulnerability. This issue affects:

Juniper Networks Junos OS:

All versions prior to 20.4R3-S8; 21.1 versions 21.1R1 and later; 21.2 versions prior to 21.2R3-S6; 21.3 versions prior to 21.3R3-S5; 21.4 versions prior to 21.4R3-S5; 22.1 versions prior to 22.1R3-S4; 22.2 versions prior to 22.2R3-S2; 22.3 versions prior to 22.3R2-S2, 22.3R3-S1; 22.4 versions prior to 22.4R2-S1, 22.4R3; 23.2 versions prior to 23.2R2.

Juniper Networks Junos OS Evolved

All versions prior to 20.4R3-S8-EVO; 21.1 versions 21.1R1-EVO and later; 21.2 versions prior to 21.2R3-S6-EVO; 21.3 versions prior to 21.3R3-S5-EVO; 21.4 versions prior to 21.4R3-S5-EVO; 22.1 versions prior to 22.1R3-S4-EVO; 22.2 versions prior to 22.2R3-S2-EVO; 22.3 versions prior to 22.3R2-S2-EVO, 22.3R3-S1-EVO; 22.4 versions prior to 22.4R2-S1-EVO, 22.4R3-EVO; 23.2 versions prior to 23.2R2-EVO.

1 / 2

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS: 20.4R3-S8, 21.2R3-S6, 21.3R3-S5, 21.4R3-S5, 22.1R3-S4, 22.2R3-S2, 22.3R2-S2, 22.3R3-S1, 22.4R2-S1, 22.4R3, 23.2R1, and all subsequent releases. Junos OS Evolved: 20.4R3-S8-EVO, 21.2R3-S6-EVO, 21.3R3-S5-EVO, 21.4R3-S5-EVO, 22.1R3-S4-EVO, 22.2R3-S2-EVO, 22.3R2-S2-EVO, 22.3R3-S1-EVO, 22.4R2-S1-EVO, 22.4R3-EVO, 23.2R1-EVO, and all subsequent releases.
First published (updated )
Severity
7.5
Input Validation
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Input Validation vulnerability in the routing protocol daemon (rpd) of Juniper Networks allows an attacker to cause a Denial of Service (DoS )to the device upon receiving and processing a specific malformed ISO VPN BGP UPDATE packet.

Continued receipt of this packet will cause a sustained Denial of Service condition.

This issue affects:

Juniper Networks Junos OS: All versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2.

Juniper Networks Junos OS Evolved:

All versions prior to 20.4R3-S6-EVO; 21.1-EVO version 21.1R1-EVO and later versions prior to 21.2R3-S4-EVO; 21.3-EVO versions prior to 21.3R3-S3-EVO; 21.4-EVO versions prior to 21.4R3-S3-EVO; 22.1-EVO versions prior to 22.1R3-EVO; 22.2-EVO versions prior to 22.2R2-S1-EVO, 22.2R3-EVO; 22.3-EVO versions prior to 22.3R1-S2-EVO, 22.3R2-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS: 20.4R3-S6, 21.1R3-S5, 21.2R3-S4, 21.3R3-S3, 21.4R3-S3, 22.1R2-S2, 22.1R3, 22.2R2-S1, 22.2R3, 22.3R1-S2, 22.3R2, 22.4R1, and all subsequent releases. Junos OS Evolved: 20.4R3-S6-EVO, 21.2R3-S4-EVO, 21.3R3-S3-EVO, 21.4R3-S3-EVO, 22.1R3-EVO, 22.2R2-S1-EVO, 22.2R3-EVO, 22.3R1-S2-EVO, 22.3R2-EVO, 22.4R1-EVO, and all subsequent releases.
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improperly Implemented Security Check for Standard vulnerability in storm control of Juniper Networks Junos OS QFX5k devices allows packets to be punted to ARP queue causing a l2 loop resulting in a DDOS violations and DDOS syslog.

This issue is triggered when Storm control is enabled and ICMPv6 packets are present on device.

This issue affects Juniper Networks:

Junos OS

All versions prior to 20.2R3-S6 on QFX5k; 20.3 versions prior to 20.3R3-S5 on QFX5k; 20.4 versions prior to 20.4R3-S5 on QFX5k; 21.1 versions prior to 21.1R3-S4 on QFX5k; 21.2 versions prior to 21.2R3-S3 on QFX5k; 21.3 versions prior to 21.3R3-S2 on QFX5k; 21.4 versions prior to 21.4R3 on QFX5k; 22.1 versions prior to 22.1R3 on QFX5k; 22.2 versions prior to 22.2R2 on QFX5k.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 20.2R3-S6, 20.3R3-S5, 20.4R3-S5, 21.1R3-S4, 21.2R3-S3, 21.3R3-S2, 21.4R3, 22.1R3, 22.2R2, 22.3R1, and all subsequent releases.
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Out-of-Bounds Write vulnerability in the Routing Protocol Daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS).

On all Junos OS and Junos OS Evolved devices an rpd crash and restart can occur while processing BGP route updates received over an established BGP session. This specific issue is observed for BGP routes learned via a peer which is configured with a BGP import policy that has hundreds of terms matching IPv4 and/or IPv6 prefixes.

This issue affects Juniper Networks Junos OS:

All versions prior to 20.4R3-S8; 21.1 version 21.1R1 and later versions; 21.2 versions prior to 21.2R3-S2; 21.3 versions prior to 21.3R3-S5; 21.4 versions prior to 21.4R2-S1, 21.4R3-S5.

This issue affects Juniper Networks Junos OS Evolved:

All versions prior to 20.4R3-S8-EVO; 21.1-EVO version 21.1R1-EVO and later versions; 21.2-EVO versions prior to 21.2R3-S2-EVO; 21.3-EVO version 21.3R1-EVO and later versions; 21.4-EVO versions prior to 21.4R2-S1-EVO, 21.4R3-S5-EVO.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS: 20.4R3-S8, 21.2R3-S2, 21.3R3-S5, 21.4R2-S1, 21.4R3-S5, 22.1R1, and all subsequent releases. Junos OS Evolved: 20.4R3-S8-EVO, 21.2R3-S2-EVO, 21.4R2-S1-EVO, 21.4R3-S5-EVO, 22.1R1-EVO, and all subsequent releases.
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Handling of Inconsistent Special Elements vulnerability in the Junos Services Framework (jsf) module of Juniper Networks Junos OS allows an unauthenticated network based attacker to cause a crash in the Packet Forwarding Engine (pfe) and thereby resulting in a Denial of Service (DoS).

Upon receiving malformed SSL traffic, the PFE crashes. A manual restart will be needed to recover the device.

This issue only affects devices with Juniper Networks Advanced Threat Prevention (ATP) Cloud enabled with Encrypted Traffic Insights (configured via ‘security-metadata-streaming policy’).

This issue affects Juniper Networks Junos OS:

All versions prior to 20.4R3-S8, 20.4R3-S9; 21.1 version 21.1R1 and later versions; 21.2 versions prior to 21.2R3-S6; 21.3 versions prior to 21.3R3-S5; 21.4 versions prior to 21.4R3-S5; 22.1 versions prior to 22.1R3-S4; 22.2 versions prior to 22.2R3-S2; 22.3 versions prior to 22.3R2-S2, 22.3R3; 22.4 versions prior to 22.4R2-S1, 22.4R3;

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 20.4R3-S8, 21.2R3-S6, 21.3R3-S5, 21.4R3-S5, 22.1R3-S4, 22.2R3-S2, 22.3R2-S2, 22.3R3, 22.4R2-S1, 22.4R3, 23.1R2, 23.2R1, and all subsequent releases.
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Allocation of Resources Without Limits or Throttling vulnerability in Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause Denial of Service (DoS).

On all Junos OS QFX5000 Series and EX4000 Series platforms, when a high number of VLANs are configured, a specific DHCP packet will cause PFE hogging which will lead to dropping of socket connections.

This issue affects:

Juniper Networks Junos OS on QFX5000 Series and EX4000 Series

21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S5; 21.3 versions prior to 21.3R3-S5; 21.4 versions prior to 21.4R3-S4; 22.1 versions prior to 22.1R3-S3; 22.2 versions prior to 22.2R3-S1; 22.3 versions prior to 22.3R2-S2, 22.3R3; 22.4 versions prior to 22.4R2.

This issue does not affect Juniper Networks Junos OS versions prior to 21.1R1

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 21.2R3-S5, 21.3R3-S5, 21.4R3-S4, 22.1R3-S3, 22.2R3-S1, 22.3R2-S2, 22.3R3, 22.4R2, 23.2R1, and all subsequent releases.
First published (updated )
Severity
7.5
Input Validation
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Input Validation vulnerability in the Packet Forwarding Engine of Juniper Networks Junos OS allows an unauthenticated, network-based attacker to cause memory leak, leading to Denial of Service (DoS).

On all Junos OS QFX5000 Series platforms, when pseudo-VTEP (Virtual Tunnel End Point) is configured under EVPN-VXLAN scenario, and specific DHCP packets are transmitted, DMA memory leak is observed. Continuous receipt of these specific DHCP packets will cause memory leak to reach 99% and then cause the protocols to stop working and traffic is impacted, leading to Denial of Service (DoS) condition. A manual reboot of the system recovers from the memory leak.

To confirm the memory leak, monitor for "sheaf:possible leak" and "vtep not found" messages in the logs.

This issue affects:

Juniper Networks Junos OS QFX5000 Series:

All versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S5; 21.3 versions prior to 21.3R3-S4; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S2; 22.2 versions prior to 22.2R2-S2, 22.2R3; 22.3 versions prior to 22.3R2-S1, 22.3R3; 22.4 versions prior to 22.4R1-S2, 22.4R2.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 20.4R3-S6, 21.1R3-S5, 21.2R3-S5, 21.3R3-S4, 21.4R3-S3, 22.1R3-S2, 22.2R2-S2, 22.2R3, 22.3R2-S1, 22.3R3, 22.4R1-S2, 22.4R2, 23.2R1, and all subsequent releases.
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (pfe) of Juniper Networks Junos OS on MX Series allows a unauthenticated network-based attacker to cause an infinite loop, resulting in a Denial of Service (DoS).

An attacker who sends malformed TCP traffic via an interface configured with PPPoE, causes an infinite loop on the respective PFE. This results in consuming all resources and a manual restart is needed to recover.

This issue affects interfaces with PPPoE configured and tcp-mss enabled.

This issue affects Juniper Networks Junos OS

All versions prior to 20.4R3-S7; 21.1 version 21.1R1 and later versions; 21.2 versions prior to 21.2R3-S6; 21.3 versions prior to 21.3R3-S5; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S4; 22.2 versions prior to 22.2R3; 22.3 versions prior to 22.3R2-S2; 22.4 versions prior to 22.4R2;

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 20.4R3-S7, 21.2R3-S6, 21.4R3-S3, 22.1R3-S4, 22.2R3, 22.3R2-S2, 22.3R3, 22.4R2, 23.2R1, and all subsequent releases.
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Locking vulnerability in the SIP ALG of Juniper Networks Junos OS on MX Series and SRX Series allows an unauthenticated networked attacker to cause a flowprocessing daemon (flowd) crash and thereby a Denial of Service (DoS). Continued receipt of these specific packets will cause a sustained Denial of Service condition. This issue can occur in a scenario where the SIP ALG is enabled and specific SIP messages are being processed simultaneously. This issue affects: Juniper Networks Junos OS on MX Series and SRX Series 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R2-S2, 21.1R3; 21.2 versions prior to 21.2R1-S2, 21.2R2; 21.3 versions prior to 21.3R1-S1, 21.3R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1.

Remedy

The following software releases have been updated to resolve this specific issue: 20.4R3-S1, 21.1R2-S2, 21.1R3, 21.2R1-S2, 21.2R2, 21.3R1-S1, 21.3R2, 21.4R1, and all subsequent releases.
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Check for Unusual or Exceptional Conditions vulnerability in the processing of specific IPv6 packets on certain EX Series devices may lead to exhaustion of DMA memory causing a Denial of Service (DoS). Over time, exploitation of this vulnerability may cause traffic to stop being forwarded, or a crash of the fxpc process. An indication of the issue occurring may be observed through the following log messages: Sep 13 17:14:59 hostname : %PFE-3: fpc0 (buf alloc) failed allocating packet buffer Sep 13 17:14:59 hostname : %PFE-7: fpc0 brcmpktbufalloc:393 (buf alloc) failed allocating packet buffer When Packet DMA heap utilization reaches 99%, the system will become unstable. Packet DMA heap utilization can be monitored using the command: user@junos# request pfe execute target fpc0 timeout 30 command "show heap" ID Base Total(b) Free(b) Used(b) % Name -- ---------- ----------- ----------- ----------- --- ----------- 0 213301a8 536870488 387228840 149641648 27 Kernel 1 91800000 8388608 3735120 4653488 55 DMA 2 92000000 75497472 74452192 1045280 1 PKT DMA DESC 3 d330000 335544320 257091400 78452920 23 Bcmsdk 4 96800000 184549376 2408 184546968 99 Packet DMA <<<< 5 903fffe0 20971504 20971504 0 0 Blob This issue affects: Juniper Networks Junos OS 18.4 versions prior to 18.4R2-S10, 18.4R3-S10 on EX2300 Series, EX2300-MP Series, EX3400 Series; 19.1 versions prior to 19.1R3-S7 on EX2300 Series, EX2300-MP Series, EX3400 Series; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4 on EX2300 Series, EX2300-MP Series, EX3400 Series; 19.3 versions prior to 19.3R3-S5 on EX2300 Series, EX2300-MP Series, EX3400 Series; 19.4 versions prior to 19.4R3-S7 on EX2300 Series, EX2300-MP Series, EX3400 Series; 20.1 versions prior to 20.1R3-S3 on EX2300 Series, EX2300-MP Series, EX3400 Series; 20.2 versions prior to 20.2R3-S3 on EX2300 Series, EX2300-MP Series, EX3400 Series; 20.3 versions prior to 20.3R3-S2 on EX2300 Series, EX2300-MP Series, EX3400 Series; 20.4 versions prior to 20.4R3-S1 on EX2300 Series, EX2300-MP Series, EX3400 Series; 21.1 versions prior to 21.1R2-S2, 21.1R3 on EX2300 Series, EX2300-MP Series, EX3400 Series; 21.2 versions prior to 21.2R1-S2, 21.2R2 on EX2300 Series, EX2300-MP Series, EX3400 Series; 21.3 versions prior to 21.3R1-S1, 21.3R2 on EX2300 Series, EX2300-MP Series, EX3400 Series.

Remedy

The following software releases have been updated to resolve this specific issue: 18.4R2-S10, 18.4R3-S10, 19.1R3-S7, 19.2R1-S8, 19.2R3-S4, 19.4R3-S7, 20.1R3-S3, 20.2R3-S3, 20.3R3-S2, 20.4R3-S1, 21.1R2-S2, 21.1R3, 21.2R1-S2, 21.2R2, 21.2R3, 21.3R1-S1, 21.3R2, 21.4R1, and all subsequent releases.
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Uncontrolled Resource Consumption vulnerability in the kernel of Juniper Networks Junos OS allows an unauthenticated network based attacker to cause 100% CPU load and the device to become unresponsive by sending a flood of traffic to the out-of-band management ethernet port. Continued receipted of a flood will create a sustained Denial of Service (DoS) condition. Once the flood subsides the system will recover by itself. An indication that the system is affected by this issue would be that an irq handled by the fman process is shown to be using a high percentage of CPU cycles like in the following example output: user@host> show system processes extensive ... PID USERNAME PRI NICE SIZE RES STATE TIME WCPU COMMAND 31 root -84 -187 0K 16K WAIT 22.2H 56939.26% irq96: fman0 This issue affects Juniper Networks Junos OS: All versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S7, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R2-S2, 20.4R3; 21.1 versions prior to 21.1R2; 21.2 versions prior to 21.2R1-S1, 21.2R2.

Remedy

The following software releases have been updated to resolve this specific issue: 18.3R3-S6, 18.4R2-S9, 18.4R3-S9, 19.1R2-S3, 19.1R3-S7, 19.2R1-S7, 19.2R3-S3, 19.3R2-S7, 19.3R3-S4, 19.4R2-S5, 19.4R3-S5, 20.1R3-S1, 20.2R3-S2, 20.3R3-S1, 20.4R2-S2, 20.4R3, 21.1R2, 21.2R1-S1, 21.2R2, 21.3R1, and all subsequent releases.
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A vulnerability in the processing of inbound IPv6 packets in Juniper Networks Junos OS on QFX5000 Series and EX4600 switches may cause the memory to not be freed, leading to a packet DMA memory leak, and eventual Denial of Service (DoS) condition. Once the condition occurs, further packet processing will be impacted, creating a sustained Denial of Service (DoS) condition. The following error logs may be observed using the "show heap" command and the device may eventually run out of memory if such packets are received continuously. Jan 12 12:00:00 device-name fpc0 (buf alloc) failed allocating packet buffer Jan 12 12:00:01 device-name fpc0 (buf alloc) failed allocating packet buffer user@device-name> request pfe execute target fpc0 timeout 30 command "show heap" ID Base Total(b) Free(b) Used(b) % Name -- ---------- ----------- ----------- ----------- --- ----------- 0 246fc1a8 536870488 353653752 183216736 34 Kernel 1 91800000 16777216 12069680 4707536 28 DMA 2 92800000 75497472 69997640 5499832 7 PKT DMA DESC 3 106fc000 335544320 221425960 114118360 34 Bcmsdk 4 97000000 176160768 200 176160568 99 Packet DMA <<<<<<<<<<<<<< 5 903fffe0 20971504 20971504 0 0 Blob This issue affects Juniper Networks Junos OS on QFX5000 Series, EX4600: 18.3R3 versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S9; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S3; 19.3 versions prior to 19.3R2-S7, 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S6; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2-S1, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue does not affect Juniper Networks Junos OS: Any versions prior to 17.4R3; 18.1 versions prior to 18.1R3-S6; 18.2 versions prior to 18.2R3; 18.3 versions prior to 18.3R3; 18.4 versions prior to 18.4R2; 19.1 versions prior to 19.1R2.

Remedy

The following software releases have been updated to resolve this specific issue: Junos OS 18.3R3-S6, 18.4R2-S9, 18.4R3-S9, 19.1R2-S3, 19.1R3-S7, 19.2R1-S8, 19.2R3-S3, 19.3R2-S7, 19.3R3-S4, 19.4R2-S5, 19.4R3-S6, 20.1R3-S1, 20.2R3-S2, 20.3R3-S1, 20.4R3, 21.1R2-S1, 21.1R3, 21.2R1-S1, 21.2R2, 21.3R1, 21.4R1, and all subsequent releases.
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A Missing Release of Memory after Effective Lifetime vulnerability in the Public Key Infrastructure daemon (pkid) of Juniper Networks Junos OS allows an unauthenticated networked attacker to cause Denial of Service (DoS). In a scenario where Public Key Infrastructure (PKI) is used in combination with Certificate Revocation List (CRL), if the CRL fails to download the memory allocated to store the CRL is not released. Repeated occurrences will eventually consume all available memory and lead to an inoperable state of the affected system causing a DoS. This issue affects Juniper Networks Junos OS: All versions prior to 18.3R3-S6; 18.4 versions prior to 18.4R2-S9, 18.4R3-S10; 19.1 versions prior to 19.1R2-S3, 19.1R3-S7; 19.2 versions prior to 19.2R1-S8, 19.2R3-S4; 19.3 versions prior to 19.3R3-S4; 19.4 versions prior to 19.4R2-S5, 19.4R3-S5; 20.1 versions prior to 20.1R3-S1; 20.2 versions prior to 20.2R3-S2; 20.3 versions prior to 20.3R3-S1; 20.4 versions prior to 20.4R3; 21.1 versions prior to 21.1R2, 21.1R3; 21.2 versions prior to 21.2R1-S1, 21.2R2. This issue can be observed by monitoring the memory utilization of the pkid process via: root@jtac-srx1500-r2003> show system processes extensive | match pki 20931 root 20 0 733M 14352K select 0:00 0.00% pkid which increases over time: root@jtac-srx1500-r2003> show system processes extensive | match pki 22587 root 20 0 901M 181M select 0:03 0.00% pkid

Remedy

The following software releases have been updated to resolve this specific issue: 18.3R3-S6, 18.4R2-S9, 18.4R3-S10, 19.1R2-S3, 19.1R3-S7, 19.2R1-S8, 19.2R3-S4, 19.3R3-S4, 19.4R2-S5, 19.4R3-S5, 20.1R3-S1, 20.2R3-S2, 20.3R3-S1, 20.4R3, 21.1R2, 21.1R3, 21.2R1-S1, 21.2R2, 21.3R1, and all subsequent releases.
First published (updated )
Severity
7.5
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

An Improper Check for Unusual or Exceptional Conditions vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows an unauthenticated networked attacker to cause a Denial of Service (DoS) by sending specific packets over VXLAN which cause the PFE to reset. This issue affects: Juniper Networks Junos OS 19.4 versions prior to 19.4R3-S7; 20.1 versions prior to 20.1R3-S3; 20.2 versions prior to 20.2R3-S3; 20.3 versions prior to 20.3R3-S2; 20.4 versions prior to 20.4R3-S1; 21.1 versions prior to 21.1R3; 21.2 versions prior to 21.2R2; 21.3 versions prior to 21.3R1-S1, 21.3R2. This issue does not affect versions of Junos OS prior to 19.4R1.

Remedy

The following Junos OS software releases have been updated to resolve this specific issue: 19.4R3-S7, 20.1R3-S3, 20.2R3-S3, 20.3R3-S2, 20.4R3-S1, 21.1R3, 21.2R2, 21.3R1-S1, 21.3R2, 21.4R1, and all subsequent releases.
First published (updated )

Contact

SecAlerts Pty Ltd.
132 Wickham Terrace
Fortitude Valley,
QLD 4006, Australia
info@secalerts.co
By using SecAlerts services, you agree to our services end-user license agreement. This website is safeguarded by reCAPTCHA and governed by the Google Privacy Policy and Terms of Service. All names, logos, and brands of products are owned by their respective owners, and any usage of these names, logos, and brands for identification purposes only does not imply endorsement. If you possess any content that requires removal, please get in touch with us.
© 2026 SecAlerts Pty Ltd.
ABN: 70 645 966 203, ACN: 645 966 203