Contiki-NG is an open-source, cross-platform operating system for IoT devices. An out-of-bounds read of 1 byte can be triggered when sending a packet to a device running the Contiki-NG operating system with SNMP enabled. The SNMP module is disabled in the default Contiki-NG configuration. The vulnerability exists in the os/net/app-layer/snmp/snmp-ber.c module, where the function snmpberdecodestringlenbuffer decodes the string length from a received SNMP packet. In one place, one byte is read from the buffer, without checking that the buffer has another byte available, leading to a possible out-of-bounds read. The problem has been patched in Contiki-NG pull request #2936. It will be included in the next release of Contiki-NG. Users are advised to apply the patch manually or to wait for the next release. A workaround is to disable the SNMP module in the Contiki-NG build configuration.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. An out-of-bounds read of 1 byte can be triggered when sending a packet to a device running the Contiki-NG operating system with SNMP enabled. The SNMP module is disabled in the default Contiki-NG configuration. The vulnerability exists in the os/net/app-layer/snmp/snmp-message.c module, where the snmpmessagedecode function fails to check the boundary of the message buffer when reading a byte from it immediately after decoding an object identifier (OID). The problem has been patched in Contiki-NG pull request 2937. It will be included in the next release of Contiki-NG. Users are advised to either apply the patch manually or to wait for the next release. A workaround is to disable the SNMP module in the Contiki-NG build configuration.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. An unaligned memory access can be triggered in the two RPL implementations of the Contiki-NG operating system. The problem can occur when either one of these RPL implementations is enabled and connected to an RPL instance. If an IPv6 packet containing an odd number of padded bytes before the RPL option, it can cause the rplextheaderhbhupdate function to read a 16-bit integer from an odd address. The impact of this unaligned read is architecture-dependent, but can potentially cause the system to crash. The problem has not been patched as of release 4.9, but will be included in the next release. One can apply the changes in Contiki-NG pull request #2962 to patch the system or wait for the next release.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An out-of-bounds read can be caused by an incoming DIO message when using the RPL-Lite implementation in the Contiki-NG operating system. More specifically, the prefix information of the DIO message contains a field that specifies the length of an IPv6 address prefix. The value of this field is not validated, which means that an attacker can set a value that is longer than the maximum prefix length. Subsequently, a memcmp function call that compares different prefixes can be called with a length argument that surpasses the boundary of the array allocated for the prefix, causing an out-of-bounds read. The problem has been patched in the "develop" branch of Contiki-NG, and is expected to be included in the next release. Users are advised to update as soon as they are able to or to manually apply the changes in Contiki-NG pull request #2721.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An attacker can trigger out-of-bounds reads in the RPL-Lite implementation of the RPL protocol in the Contiki-NG operating system. This vulnerability is caused by insufficient control of the lengths for DIO and DAO messages, in particular when they contain RPL sub-option headers. The problem has been patched in Contiki-NG 4.9. Users are advised to upgrade. Users unable to upgrade should manually apply the code changes in PR #2484.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An out-of-bounds write exists in the driver for IEEE 802.15.4 radios on nRF platforms in the Contiki-NG operating system. The problem is triggered when parsing radio frames in the readframe function in the arch/cpu/nrf/net/nrf-ieee-driver-arch.c module. More specifically, the readframe function performs an incomplete validation of the payload length of the packet, which is a value that can be set by an external party that sends radio packets to a Contiki-NG system. Although the value is validated to be in the range of the MTU length, it is not validated to fit into the given buffer into which the packet will be copied. The problem has been patched in the "develop" branch of Contiki-NG and is expected to be included in subsequent releases. Users are advised to update their develop branch or to update to a subsequent release when available. Users unable to upgrade should consider manually applying the changes in PR #2741.

In Contiki 4.5, TCP ISNs are improperly random.

Contiki-NG is an operating system for internet-of-things devices. In versions 4.9 and prior, when a packet is received, the Contiki-NG network stack attempts to start the periodic TCP timer if it is a TCP packet with the SYN flag set. But the implementation does not first verify that a full TCP header has been received. Specifically, the implementation attempts to access the flags field from the TCP buffer in the following conditional expression in the checkfortcpsyn function. For this reason, an attacker can inject a truncated TCP packet, which will lead to an out-of-bound read from the packet buffer. As of time of publication, a patched version is not available. As a workaround, one can apply the changes in Contiki-NG pull request #2510 to patch the system.

Contiki-NG is an operating system for internet-of-things devices. In versions 4.9 and prior, when processing the various IPv6 header fields during IPHC header decompression, Contiki-NG confirms the received packet buffer contains enough data as needed for that field. But no similar check is done before decompressing the IPv6 address. Therefore, up to 16 bytes can be read out of bounds on the line with the statement memcpy(&ipaddr->u8[16 - postcount], iphcptr, postcount);. The value of postcount depends on the address compression used in the received packet and can be controlled by the attacker. As a result, an attacker can inject a packet that causes an out-of-bound read. As of time of publication, a patched version is not available. As a workaround, one can apply the changes in Contiki-NG pull request #2509 to patch the system.

The Contiki-NG operating system versions 4.8 and prior can be triggered to dereference a NULL pointer in the message handling code for IPv6 router solicitiations. Contiki-NG contains an implementation of IPv6 Neighbor Discovery (ND) in the module os/net/ipv6/uip-nd6.c. The ND protocol includes a message type called Router Solicitation (RS), which is used to locate routers and update their address information via the SLLAO (Source Link-Layer Address Option). If the indicated source address changes, a given neighbor entry is set to the STALE state.

The message handler does not check for RS messages with an SLLAO that indicates a link-layer address change that a neighbor entry can actually be created for the indicated address. The resulting pointer is used without a check, leading to the dereference of a NULL pointer of type uipds6nbrt.

The problem has been patched in the develop branch of Contiki-NG, and will be included in the upcoming 4.9 release. As a workaround, users can apply Contiki-NG pull request #2271 to patch the problem directly.

Contiki-NG is an operating system for Internet of Things devices. An off-by-one error can be triggered in the Antelope database management system in the Contiki-NG operating system in versions 4.8 and prior. The problem exists in the Contiki File System (CFS) backend for the storage of data (file os/storage/antelope/storage-cfs.c). In the functions storagegetindex and storageputindex, a buffer for merging two strings is allocated with one byte less than the maximum size of the merged strings, causing subsequent function calls to the cfsopen function to read from memory beyond the buffer size. The vulnerability has been patched in the "develop" branch of Contiki-NG, and is expected to be included in the next release. As a workaround, the problem can be fixed by applying the patch in Contiki-NG pull request #2425.

Contiki-NG is an open-source, cross-platform operating system for internet of things (IoT) devices. In versions 4.8 and prior, an out-of-bounds write can occur in the BLE L2CAP module of the Contiki-NG operating system. The network stack of Contiki-NG uses a global buffer (packetbuf) for processing of packets, with the size of PACKETBUFSIZE. In particular, when using the BLE L2CAP module with the default configuration, the PACKETBUFSIZE value becomes larger then the actual size of the packetbuf. When large packets are processed by the L2CAP module, a buffer overflow can therefore occur when copying the packet data to the packetbuf. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be worked around by applying the patch manually.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to and including 4.8 are vulnerable to an out-of-bounds write that can occur in the BLE-L2CAP module. The Bluetooth Low Energy - Logical Link Control and Adaptation Layer Protocol (BLE-L2CAP) module handles fragmentation of packets up the configured MTU size. When fragments are reassembled, they are stored in a packet buffer of a configurable size, but there is no check to verify that the packet buffer is large enough to hold the reassembled packet. In Contiki-NG's default configuration, it is possible that an out-of-bounds write of up to 1152 bytes occurs. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. The problem can be fixed by applying the patch in Contiki-NG pull request #2254 prior to the release of version 4.9.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. Versions prior to 4.9 contain a NULL Pointer Dereference in BLE L2CAP module. The Contiki-NG operating system for IoT devices contains a Bluetooth Low Energy stack. An attacker can inject a packet in this stack, which causes the implementation to dereference a NULL pointer and triggers undefined behavior. More specifically, while processing the L2CAP protocol, the implementation maps an incoming channel ID to its metadata structure. In this structure, state information regarding credits is managed through calls to the function inputl2capcredit in the module os/net/mac/ble/ble-l2cap.c. Unfortunately, the inputl2capcredit function does not check that the metadata corresponding to the user-supplied channel ID actually exists, which can lead to the channel variable being set to NULL before a pointer dereferencing operation is performed. The vulnerability has been patched in the "develop" branch of Contiki-NG, and will be included in release 4.9. Users can apply the patch in Contiki-NG pull request #2253 as a workaround until the new package is released.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in the Contiki-NG operating system (file os/net/ipv6/sicslowpan.c) contains an input function that processes incoming packets and copies them into a packet buffer. Because of a missing length check in the input function, it is possible to write outside the packet buffer's boundary. The vulnerability can be exploited by anyone who has the possibility to send 6LoWPAN packets to a Contiki-NG system. In particular, the vulnerability is exposed when sending either of two types of 6LoWPAN packets: an unfragmented packet or the first fragment of a fragmented packet. If the packet is sufficiently large, a subsequent memory copy will cause an out-of-bounds write with data supplied by the attacker.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The 6LoWPAN implementation in Contiki-NG may cast a UDP header structure at a certain offset in a packet buffer. The code does not check whether the packet buffer is large enough to fit a full UDP header structure from the offset where the casting is made. Hence, it is possible to cause an out-of-bounds read beyond the packet buffer. The problem affects anyone running devices with Contiki-NG versions previous to 4.8, and which may receive 6LoWPAN packets from external parties. The problem has been patched in Contiki-NG version 4.8.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. The low-power IPv6 network stack of Contiki-NG has a buffer module (os/net/ipv6/uipbuf.c) that processes IPv6 extension headers in incoming data packets. As part of this processing, the function uipbufgetnextheader casts a pointer to a uipexthdr structure into the packet buffer at different offsets where extension headers are expected to be found, and then reads from this structure. Because of a lack of bounds checking, the casting can be done so that the structure extends beyond the packet's end. Hence, with a carefully crafted packet, it is possible to cause the Contiki-NG system to read data outside the packet buffer. A patch that fixes the vulnerability is included in Contiki-NG 4.8.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. In the RPL-Classic routing protocol implementation in the Contiki-NG operating system, an incoming DODAG Information Option (DIO) control message can contain a prefix information option with a length parameter. The value of the length parameter is not validated, however, and it is possible to cause a buffer overflow when copying the prefix in the setipfromprefix function. This vulnerability affects anyone running a Contiki-NG version prior to 4.7 that can receive RPL DIO messages from external parties. To obtain a patched version, users should upgrade to Contiki-NG 4.7 or later. There are no workarounds for this issue.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. Because of insufficient validation of IPv6 neighbor discovery options in Contiki-NG, attackers can send neighbor solicitation packets that trigger an out-of-bounds read. The problem exists in the module os/net/ipv6/uip-nd6.c, where memory read operations from the main packet buffer, <code>uipbuf</code>, are not checked if they go out of bounds. In particular, this problem can occur when attempting to read the 2-byte option header and the Source Link-Layer Address Option (SLLAO). This attack requires ipv6 be enabled for the network. The problem has been patched in the develop branch of Contiki-NG. The upcoming 4.8 release of Contiki-NG will include the patch.Users unable to upgrade may apply the patch in Contiki-NG PR #1654.

Contiki-NG is an open-source, cross-platform operating system for IoT devices. In affected versions it is possible to cause a buffer overflow when copying an IPv6 address prefix in the RPL-Classic implementation in Contiki-NG. In order to trigger the vulnerability, the Contiki-NG system must have joined an RPL DODAG. After that, an attacker can send a DAO packet with a Target option that contains a prefix length larger than 128 bits. The problem was fixed after the release of Contiki-NG 4.7. Users unable to upgrade may apply the patch in Contiki-NG PR #1615.

A buffer overflow in os/net/mac/ble/ble-l2cap.c in the BLE stack in Contiki-NG 4.4 and earlier allows an attacker to execute arbitrary code via malicious L2CAP frames.

An out-of-bounds read in the SNMP stack in Contiki-NG 4.4 and earlier allows an attacker to cause a denial of service and potentially disclose information via crafted SNMP packets to snmpberdecodestringlenbuffer in os/net/app-layer/snmp/snmp-ber.c.

Contiki-NG is an open-source, cross-platform operating system for Next-Generation IoT devices. An out-of-bounds read can be triggered by 6LoWPAN packets sent to devices running Contiki-NG 4.6 and prior. The IPv6 header decompression function (<code>uncompresshdriphc</code>) does not perform proper boundary checks when reading from the packet buffer. Hence, it is possible to construct a compressed 6LoWPAN packet that will read more bytes than what is available from the packet buffer. As of time of publication, there is not a release with a patch available. Users can apply the patch for this vulnerability out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. The RPL-Classic and RPL-Lite implementations in the Contiki-NG operating system versions prior to 4.6 do not validate the address pointer in the RPL source routing header This makes it possible for an attacker to cause out-of-bounds writes with packets injected into the network stack. Specifically, the problem lies in the rplextheadersrhupdate function in the two rpl-ext-header.c modules for RPL-Classic and RPL-Lite respectively. The addrptr variable is calculated using an unvalidated CMPR field value from the source routing header. An out-of-bounds write can be triggered on line 151 in os/net/routing/rpl-lite/rpl-ext-header.c and line 261 in os/net/routing/rpl-classic/rpl-ext-header.c, which contain the following memcpy call with addrptr as destination. The problem has been patched in Contiki-NG 4.6. Users can apply a patch out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. In verions prior to 4.6, an attacker can perform a denial-of-service attack by triggering an infinite loop in the processing of IPv6 neighbor solicitation (NS) messages. This type of attack can effectively shut down the operation of the system because of the cooperative scheduling used for the main parts of Contiki-NG and its communication stack. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. It is possible to cause an out-of-bounds write in versions of Contiki-NG prior to 4.6 when transmitting a 6LoWPAN packet with a chain of extension headers. Unfortunately, the written header is not checked to be within the available space, thereby making it possible to write outside the buffer. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. A buffer overflow vulnerability exists in Contiki-NG versions prior to 4.6. After establishing a TCP socket using the tcp-socket library, it is possible for the remote end to send a packet with a data offset that is unvalidated. The problem has been patched in Contiki-NG 4.6. Users can apply the patch for this vulnerability out-of-band as a workaround.

Contiki-NG is an open-source, cross-platform operating system for internet of things devices. In versions prior to 4.5, buffer overflow can be triggered by an input packet when using either of Contiki-NG's two RPL implementations in source-routing mode. The problem has been patched in Contiki-NG 4.5. Users can apply the patch for this vulnerability out-of-band as a workaround.

LeoCAD before 21.03 sometimes allows a use-after-free during the opening of a new document.

An issue was discovered in uIP through 1.0, as used in Contiki and Contiki-NG. Domain name parsing lacks bounds checks, allowing an attacker to corrupt memory with crafted DNS packets.