Improper input validation vulnerability in Apache Camel Atmosphere Websocket component.

This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.

The camel-atmosphere-websocket producer selects which connected WebSocket peers a message is delivered to through Exchange headers, and the string values of those headers sat outside the Camel namespace: websocket.connectionKey and websocket.connectionKey.list, along with websocket.sendToAll, websocket.eventType and websocket.errorType. WebsocketEndpoint extends ServletEndpoint and so inherits HttpHeaderFilterStrategy, which filters only the Camel and camel prefixes; the dotted names therefore fell outside the filtered namespace and were admitted in both directions by every HTTP-family consumer. In a route bridging an HTTP consumer into an atmosphere-websocket producer, an external sender could supply the list header and take over the producer's dispatch decision. WebsocketProducer.process tests the list header before the single-key header, so an injected value discarded the recipient the route had selected: a notification intended for one connected client could be suppressed, or delivered instead to a different client whose connection key the sender knows. The header need not be a query parameter and need not be supplied as a list literally - Camel's HTTP binding promotes a repeated header name, and a bracketed value, to a List when mapping onto the Exchange - so an ordinary inbound HTTP header is sufficient to reach the list-valued branch. This is distinct from CVE-2026-55993, which concerns the consumer-side query-parameter path in the same component. The behaviour dates back to the introduction of these constants, first released in 2.17.0, and was unchanged until this fix.

Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, strip the dispatch headers at the trust boundary before the producer, for example with removeHeaders(“websocket.”) placed between the HTTP consumer and the atmosphere-websocket producer. Note that the fix renames the header string values into the Camel namespace, which is a breaking change for routes that set them by literal string: routes referencing the WebsocketConstants fields symbolically are unaffected, and the change is documented in the upgrade guides. As defence in depth, do not bridge an untrusted HTTP consumer directly into a WebSocket producer whose dispatch is header-driven without stripping the dispatch namespace first.

Relative path traversal vulnerability in Apache Camel Azure-Storage Datalake component

This issue affects Apache Camel: from 4.0.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.

The camel-azure-storage-datalake component can download an Azure Data Lake Storage Gen2 file to the local filesystem through its downloadToFile operation, writing into the directory named by the fileDir endpoint option. DataLakeFileOperations.downloadToFile built the local target by joining fileDir with the remote path name exactly as the Azure SDK reported it (new File(fileDir, fileClientWrapper.getFileName())) and passed the result straight to the SDK download call, with no lexical normalization and no check that the resolved location stayed inside fileDir. The remote name is not route-controlled data: the consumer enumerates the filesystem in DataLakeConsumer.createBatchExchangesFromPath, which lists paths and creates one exchange per entry from PathItem.getName() verbatim, applying no name filtering by default. A path name containing parent-directory segments therefore resolved to a location outside the configured fileDir, letting anyone able to influence the names present in the consumed Data Lake filesystem cause Camel to create or overwrite a file at a location of their choosing, with the privileges of the Camel process. Depending on what the process can write to, overwriting a file outside the download directory can escalate beyond the loss of integrity of that file. The fileDir option is an ordinary common-group configuration parameter and carries no security marker, so nothing signalled to users that its value was not being enforced as a containment boundary. Camel's other file-download consumers - camel-file, camel-ftp, camel-smb, camel-mina-sftp and camel-azure-files - already constrained their local downloads to the configured directory using a path-segment boundary check; the camel-azure-storage-datalake download path was not covered by that work.

Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, constrain the names the consumer will act on using the regex endpoint option, which is applied to each listed path name as a full-string match, so that only simple single-segment names are accepted and any name carrying a path separator or a parent-directory segment is filtered out before an exchange is created. Alternatively, avoid the downloadToFile operation on untrusted filesystems and write the payload from the route under a file name the route itself controls, rather than one taken from the remote listing. As defence in depth, treat the object names in any externally writable Data Lake filesystem as untrusted input and do not derive local filesystem paths from them.

Improper input validation vulnerability in Apache Camel.

This issue affects Apache Camel: from 2.17.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.

The camel-mail component ships a MimeMultipart data format that can unmarshal a MIME multipart message. When it is configured with headersInline set to true, the unmarshal path copies the MIME headers of the incoming message onto the Camel message: it enumerates every header that is not one of the three standard ones it generates itself - Message-ID, MIME-Version and Content-Type - and calls setHeader for each, applying no HeaderFilterStrategy. The names of those MIME headers come from the message being unmarshalled, so a sender able to influence the message could place a header whose name falls in the Camel-internal namespace and have it set on the Exchange. Camel components read control headers from that namespace to override their configured behaviour - the camel-sql producer, for instance, takes the statement to execute from a Camel header when one is present - so an injected header could redirect what a downstream step in the route does with data the route author never intended it to take from the message. Which sinks are reachable, and what the consequences are, depends entirely on what the route does after the unmarshal step. The camel-mail consumer already applied a header filter strategy on its own inbound path, so this was the parallel inbound path into the same component that the earlier hardening did not cover. The affected copy is reached only when headersInline is enabled, which is not the default: with the default setting the MIME headers are surfaced as attachments rather than as message headers, and are not affected. The behaviour dates back to the introduction of the data format in 2.17.0 and was present on every release line until this fix.

Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, leave headersInline at its default of false where the inline headers are not needed, since the copy is only reached when it is enabled. Where it must stay enabled, strip Camel-internal headers immediately after the unmarshal step, for example with removeHeaders(“Camel”) placed before any processor or producer that reads control headers, and do not unmarshal MIME content from an untrusted sender into a route that dispatches on header values. As defence in depth, treat the header names of any MIME message arriving from outside the trust boundary as untrusted input.

Severity: moderate

Affected versions:

- Apache Camel (org.apache.camel:camel-mail) 2.17.0 before 4.14.9 - Apache Camel (org.apache.camel:camel-mail) 4.15.0 before 4.18.4 - Apache Camel (org.apache.camel:camel-mail) 4.19.0 before 4.22.0

Description:

Improper input validation vulnerability in Apache Camel.

This issue affects Apache Camel: from 2.17.0 before 4.14.9, from 4.15.0 before 4.18.4, from 4.19.0 before 4.22.0.

The camel-mail component ships a MimeMultipart data format that can unmarshal a MIME multipart message. When it is configured with headersInline set to true, the unmarshal path copies the MIME headers of the incoming message onto the Camel message: it enumerates every header that is not one of the three standard ones it generates itself - Message-ID, MIME-Version and Content-Type - and calls setHeader for each, applying no HeaderFilterStrategy. The names of those MIME headers come from the message being unmarshalled, so a sender able to influence the message could place a header whose name falls in the Camel-internal namespace and have it set on the Exchange. Camel components read control headers from that namespace to override their configured behaviour - the camel-sql producer, for instance, takes the statement to execute from a Camel header when one is present - so an injected header could redirect what a downstream step in the route does with data the route author never intended it to take from the message. Which sinks are reachable, and what the consequences are, depends entirely on what the route does after the unmarshal step. The camel-mail consumer already applied a header filter strategy on its own inbound path, so this was the parallel inbound path into the same component that the earlier hardening did not cover. The affected copy is reached only when headersInline is enabled, which is not the default: with the default setting the MIME headers are surfaced as attachments rather than as message headers, and are not affected. The behaviour dates back to the introduction of the data format in 2.17.0 and was present on every release line until this fix.

Users are recommended to upgrade to version 4.22.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.9. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.4. For deployments that cannot upgrade immediately, leave headersInline at its default of false where the inline headers are not needed, since the copy is only reached when it is enabled. Where it must stay enabled, strip Camel-internal headers immediately after the unmarshal step, for example with removeHeaders(“Camel”) placed before any processor or producer that reads control headers, and do not unmarshal MIME content from an untrusted sender into a route that dispatches on header values. As defence in depth, treat the header names of any MIME message arriving from outside the trust boundary as untrusted input.

Credit:

Atuin - Automated Vulnerability Discovery Engine, anciety of Tencent Xuanwu Lab (finder) Andrea Cosentino (remediation developer)

References:

https://camel.apache.org/security/CVE-2026-59230.html https://camel.apache.org/ https://www.cve.org/CVERecord?id=CVE-2026-59230

Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component.

The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATIONNAME / OPERATIONNAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.

Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component.

JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.;javax.;org.apache.camel.;!. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel. namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it. This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes.

Improper Input Validation, Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel Mail Component.

The camel-mail producer (MailProducer.getSender) scanned the outgoing Exchange for message headers in the mail.smtp. / mail.smtps. namespace and, when any were present, built a per-message JavaMail sender with those values applied as JavaMail session properties, overriding the endpoint configuration. This namespace is Camel-internal - only MailProducer interprets it - and was not blocked by any HeaderFilterStrategy, so the values could originate from any inbound protocol (for example platform-http query parameters or request headers, or JMS / Kafka messages from untrusted producers) that feeds a route ending in an smtp / smtps producer without an intervening removeHeaders. The maximal impact is version-dependent: on releases before 4.19.0, setting mail.smtp.host redirects the SMTP connection to a server under the attacker's control, and because the producer then authenticates with the endpoint's configured username and password those credentials are transmitted to the attacker; on 4.19.0 and later the producer connects to the endpoint's configured host explicitly, so the reachable impact is limited to weakening transport security (for example mail.smtp.ssl.trust, mail.smtp.starttls.enable or mail.smtp.socks.host) and interception of the outgoing message rather than host redirect. Exploitation requires a route that channels untrusted input into the mail producer without stripping the namespace. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the per-message override is disabled by default; enable it only on trusted endpoints with useJavaMailSessionPropertiesFromHeaders=true. For deployments that cannot upgrade immediately, strip the namespace before the mail producer with removeHeaders('mail.smtp.') and removeHeaders('mail.smtps.') between any untrusted ingress and the smtp / smtps producer. Even with the opt-in enabled, route authors should still strip the namespace on any path that carries untrusted input.

Improper Input Validation, Unintended Proxy or Intermediary ('Confused Deputy') vulnerability in Apache Camel CXF SOAP component.

The camel-cxf producer selects which SOAP operation to invoke on the backend service from the operationName (and operationNamespace) Exchange header, whose constant values (CxfConstants.OPERATIONNAME / OPERATIONNAMESPACE) were the plain strings operationName / operationNamespace. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a cxf: producer, any HTTP client could therefore set the operationName header and have CxfProducer resolve and invoke a different WSDL operation than the route intended - for example replacing a read operation with a destructive one - against the backend SOAP service (a confused-deputy redirection). The constant is defined in the shared camel-cxf-common module, so the same non-prefixed names also applied to camel-cxfrs. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, the operation-selection headers are named CamelCxfOperationName / CamelCxfOperationNamespace and are filtered at transport boundaries; see the 4.21 upgrade guide for the cross-transport carrier-header pattern. For deployments that cannot upgrade immediately, do not select the CXF operation from untrusted input: strip the operationName and operationNamespace headers from any untrusted ingress before the cxf: producer and set the operation from a trusted source in the route.

Deserialization of Untrusted Data vulnerability in Apache Camel, Apache Camel JMS component.

JmsBinding.extractBodyFromJms() in camel-jms - and the equivalent JmsBinding in camel-sjms - deserializes the payload of an incoming JMS ObjectMessage via jakarta.jms.ObjectMessage.getObject() whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer. The CVE-2026-40860 hardening added a post-deserialization class check that rejects classes outside the default allow-list java.;javax.;org.apache.camel.;!. However org.apache.camel.support.DefaultExchangeHolder itself lives in the allow-listed org.apache.camel. namespace, so an ObjectMessage whose top-level object is a DefaultExchangeHolder passes the check. The receiving side then calls DefaultExchangeHolder.unmarshal() on it without requiring the transferExchange option to be enabled - an asymmetric trust boundary, since the sending side gates ObjectMessage and transferExchange handling but the receiving side did not - writing every non-null field of the holder into the Exchange: the message body, the IN and OUT headers, the exchange properties, the variables, the exchange id and the exception. An attacker who can publish an ObjectMessage to a queue or topic consumed by an affected Camel application can therefore inject arbitrary Exchange state using only universally-trusted java.lang and java.util types, with no deserialization gadget chain required, to manipulate routing and headers, exchange properties and error handling. The same handling applies to camel-sjms and camel-sjms2, and to the JMS-family components built on JmsComponent and JmsBinding: camel-amqp, camel-activemq and camel-activemq6. This is a bypass of the CVE-2026-40860 fix rather than a flaw in it. This issue affects Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0; Apache Camel: from 3.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, JMS ObjectMessage handling is disabled by default in camel-jms, camel-sjms and the JMS-family components (a new objectMessageEnabled option defaults to false at the component and endpoint level), so an incoming ObjectMessage - including a DefaultExchangeHolder payload - is no longer deserialized unless the option is explicitly enabled; only set objectMessageEnabled=true when the consumed JMS destination is fed exclusively by trusted producers. For deployments that cannot upgrade immediately, restrict publish access to the queues and topics consumed by Camel to trusted producers via JMS broker authorization, and do not expose JMS consumers that map ObjectMessage bodies to untrusted networks; a JMS-provider deserialization allow-list does not mitigate this specific bypass because the crafted payload uses only universally-trusted classes.

Camel-CXF and Camel-Knative Message Header Injection via Missing Inbound Filtering

The CXF and Knative HeaderFilterStrategy implementations (CxfRsHeaderFilterStrategy in camel-cxf-rest, CxfHeaderFilterStrategy in camel-cxf-transport, and KnativeHttpHeaderFilterStrategy in camel-knative-http) only filter outbound Camel-internal headers via setOutFilterStartsWith, while not configuring inbound filtering via setInFilterStartsWith. As a result, an unauthenticated attacker can inject Camel-internal headers (e.g. CamelExecCommandExecutable, CamelFileName) via HTTP requests to CXF-RS or CXF-SOAP endpoints. When a route forwards messages from these endpoints to header-driven components such as camel-exec or camel-file, the injected headers override configured values, enabling remote code execution or arbitrary file writes. This is the same pattern that was previously addressed in camel-undertow (CVE-2025-30177), the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891), and non-HTTP strategies (CVE-2026-40453).

This issue affects Apache Camel: from 3.18.0 before 4.14.6, from 4.15.0 before 4.18.2.

Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.2. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6.

JmsBinding.extractBodyFromJms() in camel-jms, and the equivalent JmsBinding class in camel-sjms, deserialized the payload of incoming JMS ObjectMessage values via javax.jms.ObjectMessage.getObject() without applying any ObjectInputFilter, class allowlist or class denylist. Because this code path is reached whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer, an attacker able to publish a crafted ObjectMessage to a queue or topic consumed by a Camel application could achieve remote code execution when a deserialization gadget chain was present on the classpath. The same handling was reached transitively through camel-sjms2 (whose Sjms2Endpoint extends SjmsEndpoint) and through camel-amqp (whose AMQPJmsBinding extends JmsBinding), and by other JMS-family components built on JmsComponent such as camel-activemq and camel-activemq6.

This issue affects Apache Camel: from 3.0.0 before 4.14.7, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0.

Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.7. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.

The fix for CVE-2025-27636 added setLowerCase(true) to HttpHeaderFilterStrategy so that case-variant header names such as 'CAmelExecCommandExecutable' are filtered out alongside 'CamelExecCommandExecutable'. The same setLowerCase(true) call was not applied to five non-HTTP HeaderFilterStrategy implementations: JmsHeaderFilterStrategy and ClassicJmsHeaderFilterStrategy in camel-jms, SjmsHeaderFilterStrategy in camel-sjms, CoAPHeaderFilterStrategy in camel-coap, and GooglePubsubHeaderFilterStrategy in camel-google-pubsub. Because those strategies use case-sensitive String.startsWith('Camel'/'camel') filtering while the Camel Exchange stores headers in a case-insensitive map, an attacker with JMS (or equivalent) producer access to the broker consumed by a Camel route can inject case-variant Camel internal headers, which are then resolved by downstream components such as camel-exec and camel-file using their canonical casing. This enables remote code execution and arbitrary file write on routes that forward JMS messages to header-driven components.

This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0.

Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.

The Camel-Mail component is vulnerable to Camel message header injection. The custom header filter strategy used by the component (MailHeaderFilterStrategy) only filters the 'out' direction via setOutFilterStartsWith, while it does not configure the 'in' direction via setInFilterStartsWith. As a result, when a Camel application consumes mail through camel-mail (for example via from(\"imap://...\") or from(\"pop3://...\")) the inbound filter check is skipped and Camel-prefixed MIME headers are mapped unfiltered into the Exchange. An attacker who can deliver an email to a mailbox monitored by such a consumer can inject Camel-specific headers that, for some Camel components downstream of the mail consumer (such as camel-bean, camel-exec, or camel-sql), can alter the behaviour of the route. This is the same pattern that was previously addressed in camel-undertow (CVE-2025-30177) and the broader incoming-header filter (CVE-2025-27636 and CVE-2025-29891).

This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.1.

Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.18.x LTS releases stream, then they are suggested to upgrade to 4.18.1. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6.

The ConsulRegistry in the camel-consul component (class org.apache.camel.component.consul.ConsulRegistry and its inner ConsulRegistryUtils.deserialize method) read Java-serialized values from the Consul KV store and passed them to ObjectInputStream.readObject() without configuring an ObjectInputFilter. An attacker who can write to the Consul KV store backing a Camel ConsulRegistry instance could inject a malicious serialized Java object that is deserialized the next time Camel performs a lookup against that registry, leading to arbitrary code execution in the Camel process. The issue mirrors the class of vulnerability already addressed for other Camel components in CVE-2024-22369, CVE-2024-23114 and CVE-2026-25747, and was overlooked during the original remediation of those CVEs.

This issue affects Apache Camel: from 3.0.0 before 4.14.6, from 4.15.0 before 4.18.1.

Users are recommended to upgrade to version 4.19.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.6. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.1.

Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component.

The camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java's default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client.

Improper Neutralization of Special Elements in Data Query Logic vulnerability in Apache Camel Neo4J component.

The camel-neo4j producer builds the Cypher WHERE clause for its match/retrieve and delete operations from the CamelNeo4jMatchProperties map. CVE-2025-66169 addressed Cypher injection through the property values by binding them as query parameters ($paramN), but the property names (the JSON keys of that map) were still concatenated into the query string verbatim in Neo4jProducer.retrieveNodes() and deleteNode(). A property name containing Cypher syntax therefore alters the structure of the executed query. Where a route maps untrusted input into the CamelNeo4jMatchProperties map - for example by passing a request body as the match map, or from a consumer that does not filter inbound Camel headers - an attacker who controls the JSON key names can inject arbitrary Cypher and read, modify or delete any node or relationship in the Neo4j database. The CamelNeo4jMatchProperties header is itself Camel-prefixed and is filtered by the HTTP header-filter strategy, so a plain HTTP client cannot set it directly; the issue is reachable through routes that deliberately or inadvertently carry untrusted data into that header. This issue affects Apache Camel: from 4.10.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, do not populate the CamelNeo4jMatchProperties map from untrusted input: validate or allow-list the property names (for example against ^[A-Za-z][A-Za-z0-9]$) before the Neo4j producer, and ensure that any consumer feeding such a route filters inbound Camel / camel headers so the match header cannot be supplied by an external sender.

Improper Input Validation, Improper Access Control vulnerability in Apache Camel in Camel Mongodb Gridfs component.

The camel-mongodb-gridfs producer selects the GridFS operation to perform from the gridfs.operation Exchange header when the endpoint's operation parameter is not set - which is the default. The control-header constants (GridFsConstants.GRIDFSOPERATION, GRIDFSOBJECTID, GRIDFSMETADATA, GRIDFSCHUNKSIZE, GRIDFSFILEIDPRODUCED) were the plain strings gridfs.operation, gridfs.objectid, gridfs.metadata, gridfs.chunksize and gridfs.fileid. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a mongodb-gridfs: producer with no explicit operation, any HTTP client could therefore set the gridfs.operation header to override the route's intended operation - switching, for example, a file upload to remove (deleting a file identified by the attacker-supplied gridfs.objectid), listAll (enumerating every file in the bucket) or findOne (reading a file) - and supply a gridfs.metadata value that is parsed as a MongoDB document, enabling NoSQL operator injection. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that drive GridFS operations or metadata via the raw header names must use CamelGridFsOperation / CamelGridFsObjectId / CamelGridFsMetadata / CamelGridFsChunkSize / CamelGridFsFileId instead of the gridfs. names. For deployments that cannot upgrade immediately, set an explicit operation on the mongodb-gridfs: endpoint so the operation is not taken from a header, and strip the gridfs. headers from any untrusted ingress before the producer.

Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel Salesforce Component.

The camel-salesforce producer resolves its operation parameters - the SOQL query, the SOSL search, the target SObject name and id, the Apex REST URL and method, and the Apex query parameters - from Exchange message headers, reading the header in preference to the value configured on the endpoint (AbstractSalesforceProcessor.getParameter() reads the header first and uses the endpoint configuration only as a fallback). The control-header constants in SalesforceEndpointConfig (for example SOBJECTQUERY = sObjectQuery, SOBJECTSEARCH = sObjectSearch, SOBJECTNAME = sObjectName, SOBJECTID = sObjectId, APEXURL = apexUrl, APEXMETHOD = apexMethod, and the apexQueryParam. prefix) used plain, non-Camel-prefixed values. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a salesforce: producer, any HTTP client could therefore set these headers and override what the route intended - supplying its own SOQL query or SOSL search to read data from any SObject the connected Salesforce user can access, overriding the target SObject name and id for CRUD operations, or redirecting an Apex REST call to a different endpoint and HTTP method (including destructive methods) with injected query parameters. All such operations run with the full permissions of the Salesforce connected (integration) user, which is typically broad. No credentials are required from the attacker when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Salesforce operation parameters via the raw header names must use the CamelSalesforce names (for example CamelSalesforceSObjectQuery and CamelSalesforceApexUrl) instead of the old sObject / apex values; the endpoint-option spelling is unchanged. For deployments that cannot upgrade immediately, strip the Salesforce control headers from any untrusted ingress before the salesforce: producer (for example removeHeaders('sObject') and removeHeaders('apex') at the start of the route), and set the query, SObject and Apex parameters from a trusted source.

Deserialization of Untrusted Data vulnerability in Apache Camel.

The default ObjectInputFilter pattern shipped with several Apache Camel components for defense-in-depth deserialization filtering ('java.;javax.;org.apache.camel.;!', or the no-'javax.' variant in the aggregation-repository components) uses a recursive 'java.' glob that admits classes whose hashCode/equals/readObject methods perform network I/O, notably java.net.URL and java.net.InetAddress. When an attacker can deliver a Java-serialized payload to an affected Camel consumer, deserialization of a HashMap (or any collection that calls hashCode on its elements) containing java.net.URL keys causes the JVM to issue DNS queries to the attacker-supplied host during the deserialization side-effect. The class-level filter check passes because the resulting object's class (HashMap) is allow-listed; the DNS query is observable on an attacker-controlled DNS server, providing an out-of-band side channel. The exposure is highest on the camel-jms family because JmsBinding.extractBodyFromJms invokes ObjectMessage.getObject() unconditionally when mapJmsMessage=true (default). Affected components: camel-jms, camel-sjms, camel-amqp, camel-mina, camel-netty, camel-netty-http, camel-vertx-http, camel-infinispan, and the aggregation repository components camel-leveldb, camel-cassandraql, camel-consul, camel-sql (JDBC aggregation repository). This issue affects Apache Camel: from 4.14.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to a version that contains the CAMEL-23372 fix once available: 4.21.0 for the 4.21.x line, 4.18.3 for the 4.18.x line, and 4.14.8 for the 4.14.x line. For deployments that cannot upgrade immediately, configure a JMS-provider-side allow-list (Apache ActiveMQ Artemis 'deserializationAllowList' / 'deserializationDenyList', Apache ActiveMQ Classic 'org.apache.activemq.SERIALIZABLEPACKAGES') as the primary mitigation, and/or override the in-code default via the endpoint-level 'deserializationFilter' option or the JVM-wide '-Djdk.serialFilter' system property with an explicit deny: '!java.net.;java.;javax.;org.apache.camel.;!' (or '!java.net.;java.;org.apache.camel.;!' for the aggregation-repository components, which do not include javax.).

Improper Input Validation, Authorization Bypass Through User-Controlled Key vulnerability in Apache Camel ElasticSearch Rest Client.

The camel-elasticsearch-rest-client component reads several Exchange headers to control its behaviour - SEARCHQUERY (an advanced query body), OPERATION (which Elasticsearch operation to run), INDEXNAME, INDEXSETTINGS and ID. The string values of these header constants, defined in ElasticSearchRestClientConstant, are plain unprefixed names ('SEARCHQUERY', 'OPERATION', 'INDEXNAME', 'INDEXSETTINGS', 'ID') rather than the 'Camel'-prefixed names used by every other Camel component (for example CamelSqlQuery, CamelMongoDbCriteria, CamelCqlQuery). Camel's inbound HTTP header filter, HttpHeaderFilterStrategy, blocks only header names that begin with 'Camel' or 'camel'. Because the Elasticsearch header names do not carry that prefix, they pass through the inbound filter unchanged. When a Camel route exposes an HTTP entry point (for example platform-http) in front of an elasticsearch-rest-client producer, an untrusted HTTP client can set these headers directly on its request and override the query and operation that the route author configured: reading every document in the index (SEARCHQUERY with a matchall query), deleting documents (OPERATION set to Delete together with ID), or exfiltrating selected fields. No credentials are required and the producer reads the headers unconditionally. This issue affects Apache Camel: from 4.3.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. The fix renames the camel-elasticsearch-rest-client Exchange header constant string values (ID, SEARCHQUERY, INDEXSETTINGS, INDEXNAME, OPERATION) to carry the Camel prefix (CamelElasticsearchId, CamelElasticsearchSearchQuery, CamelElasticsearchIndexSettings, CamelElasticsearchIndexName, CamelElasticsearchOperation) so that they are blocked by the inbound HttpHeaderFilterStrategy; the Java field names are unchanged. For deployments that cannot upgrade immediately, strip the affected headers from untrusted inbound messages before they reach the producer (for example removeHeader('SEARCHQUERY'), removeHeader('OPERATION'), removeHeader('INDEXNAME'), removeHeader('INDEXSETTINGS') and removeHeader('ID') in front of the elasticsearch-rest-client endpoint), or apply a custom HeaderFilterStrategy that blocks these names.

Severity: moderate

Affected versions:

- Apache Camel 4.8.0 through 4.18.2 - Apache Camel 4.19.0 through 4.20.0

Description:

Improper Input Validation vulnerability in Apache Camel.

This issue affects Apache Camel: from 4.8.0 through 4.18.2, from 4.19.0 through 4.20.0.

Users are recommended to upgrade to version 4.18.3, 4.21.0, which fixes the issue.

Credit:

Yu Bao - yubao () paypal com, who works for paypal.com. (reporter)

References:

https://camel.apache.org/security/CVE-2026-49042.html https://camel.apache.org/ https://www.cve.org/CVERecord?id=CVE-2026-49042

Severity: important

Affected versions:

- Apache Camel through 4.14.7 - Apache Camel 4.15.0 through 4.18.2 - Apache Camel 4.19.0 through 4.20.0

Description:

Improper Input Validation vulnerability in Apache Camel.

This issue affects Apache Camel: through 4.14.7, from 4.15.0 through 4.18.2, from 4.19.0 through 4.20.0.

Users are recommended to upgrade to version 4.14.8, 4.18.3, 4.21.0, which fixes the issue.

Credit:

Yu Bao - yubao () paypal com, who works for paypal.com. (reporter)

References:

https://camel.apache.org/security/CVE-2026-46587.html https://camel.apache.org/ https://www.cve.org/CVERecord?id=CVE-2026-46587

Severity: moderate

Affected versions:

- Apache Camel (org.apache.camel:camel-netty-http) 4.0.0 before 4.14.8 - Apache Camel (org.apache.camel:camel-netty-http) 4.15.0 before 4.18.3 - Apache Camel (org.apache.camel:camel-netty-http) 4.19.0 before 4.21.0

Description:

Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Netty HTTP component.

The camel-netty-http HTTP server consumer exposes a muteException option that controls what is returned to the client when a route processing error occurs. This option defaulted to false because the backing field was an uninitialised primitive boolean (Java's default of false), whereas the other Camel HTTP server components (camel-http / camel-jetty / camel-servlet and camel-platform-http) default it to true. With muteException=false, when a request triggers an exception during route processing the consumer writes the full Throwable stack trace into the HTTP response body as text/plain (via DefaultNettyHttpBinding) instead of returning an empty body. Any unauthenticated client that can reach the endpoint and cause a processing error - for example by sending a malformed request body, an invalid parameter, or otherwise triggering a route-internal failure - therefore receives a complete Java stack trace. Such a stack trace can disclose sensitive internal information, including credentials embedded in exception messages, internal host names and IP addresses, filesystem paths, dependency and version details, database and class names, and the application's internal structure, which an attacker can use to plan further attacks. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. For deployments that cannot upgrade immediately, set muteException=true explicitly on the camel-netty-http consumer (for example netty-http: http://0.0.0.0:8080/api?muteException=true , or globally via the camel.component.netty-http.configuration.mute-exception=true property), so that processing errors no longer return the stack trace to the client.

Credit:

Yu Bao from PayPal (finder) Andrea Cosentino (remediation developer)

References:

https://camel.apache.org/security/CVE-2026-49365.html https://camel.apache.org/ https://www.cve.org/CVERecord?id=CVE-2026-49365

Severity: moderate

Affected versions:

- Apache Camel (org.apache.camel:camel-solr) 4.0.0 before 4.14.8 - Apache Camel (org.apache.camel:camel-solr) 4.15.0 before 4.18.3 - Apache Camel (org.apache.camel:camel-solr) 4.19.0 before 4.21.0

Description:

Improper Neutralization of Special Elements in Output Used by a Downstream Component ('Injection'), Improper Input Validation, Server-Side Request Forgery (SSRF) vulnerability in Apache Camel Solr component.

The camel-solr producer copies Exchange message headers whose names begin with the SolrParam. prefix into the parameters of the Solr request, and headers whose names begin with the SolrField. prefix into the fields of the indexed Solr document. The prefix constants (SolrConstants.HEADERPARAMPREFIX / HEADERFIELDPREFIX) were the plain strings SolrParam. / SolrField.. Because these names do not start with the Camel / camel prefix, HttpHeaderFilterStrategy - which blocks only the Camel header namespace on the HTTP boundary - let them pass from an inbound HTTP request straight into the Exchange. In a route that bridges an HTTP consumer (for example platform-http) into a solr: producer, any HTTP client could therefore set SolrParam. headers to inject arbitrary Solr request parameters - including shards or stream.url, which cause the Solr server to issue server-side requests to an attacker-chosen URL (server-side request forgery, for example to an internal service or a cloud metadata endpoint), or qt to reach administrative request handlers - and set SolrField. headers to inject arbitrary fields into indexed documents. No credentials are required when the bridging consumer is unauthenticated. This issue affects Apache Camel: from 4.0.0 before 4.14.8, from 4.15.0 before 4.18.3, from 4.19.0 before 4.21.0.

Users are recommended to upgrade to version 4.21.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.8. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.3. After upgrading, routes that set Solr parameters or fields via the raw header prefixes must use CamelSolrParam. / CamelSolrField. instead of SolrParam. / SolrField.. For deployments that cannot upgrade immediately, strip the SolrParam. and SolrField. headers from any untrusted ingress before the solr: producer, and set the required Solr parameters and fields from a trusted source in the route.

Credit:

Yu Bao from Paypal (finder) Andrea Cosentino (remediation developer)

References:

http://camel.apache.org/security/CVE-2026-48203.html https://camel.apache.org/ https://www.cve.org/CVERecord?id=CVE-2026-48203

JmsBinding.extractBodyFromJms() in camel-jms, and the equivalent JmsBinding class in camel-sjms, deserialized the payload of incoming JMS ObjectMessage values via javax.jms.ObjectMessage.getObject() without applying any ObjectInputFilter, class allowlist or class denylist. Because this code path is reached whenever the mapJmsMessage option is enabled (the default) and Camel acts as a JMS consumer, an attacker able to publish a crafted ObjectMessage to a queue or topic consumed by a Camel application could achieve remote code execution when a deserialization gadget chain was present on the classpath. The same handling was reached transitively through camel-sjms2 (whose Sjms2Endpoint extends SjmsEndpoint) and through camel-amqp (whose AMQPJmsBinding extends JmsBinding), and by other JMS-family components built on JmsComponent such as camel-activemq and camel-activemq6.

This issue affects Apache Camel: from 3.0.0 before 4.14.7, from 4.15.0 before 4.18.2, from 4.19.0 before 4.20.0.

Users are recommended to upgrade to version 4.20.0, which fixes the issue. If users are on the 4.14.x LTS releases stream, then they are suggested to upgrade to 4.14.7. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.2.

Improperly Controlled Modification of Dynamically-Determined Object Attributes vulnerability in Apache Camel Camel-Coap component.

Apache Camel's camel-coap component is vulnerable to Camel message header injection, leading to remote code execution when routes forward CoAP requests to header-sensitive producers (e.g. camel-exec)

The camel-coap component maps incoming CoAP request URI query parameters directly into Camel Exchange In message headers without applying any HeaderFilterStrategy. Specifically, CamelCoapResource.handleRequest() iterates over OptionSet.getUriQuery() and calls camelExchange.getIn().setHeader(...) for every query parameter. CoAPEndpoint extends DefaultEndpoint rather than DefaultHeaderFilterStrategyEndpoint, and CoAPComponent does not implement HeaderFilterStrategyComponent; the component contains no references to HeaderFilterStrategy at all.

As a result, an unauthenticated attacker who can send a single CoAP UDP packet to a Camel route consuming from coap:// can inject arbitrary Camel internal headers (those prefixed with Camel) into the Exchange. When the route delivers the message to a header-sensitive producer such as camel-exec, camel-sql, camel-bean, camel-file, or template components (camel-freemarker, camel-velocity), the injected headers can alter the producer's behavior. In the case of camel-exec, the CamelExecCommandExecutable and CamelExecCommandArgs headers override the executable and arguments configured on the endpoint, resulting in arbitrary OS command execution under the privileges of the Camel process.

The producer's output is written back to the Exchange body and returned in the CoAP response payload by CamelCoapResource, giving the attacker an interactive RCE channel without any need for out-of-band exfiltration. Exploitation prerequisites are minimal: a single unauthenticated UDP datagram to the CoAP port (default 5683). CoAP (RFC 7252) has no built-in authentication, and DTLS is optional and disabled by default. Because the protocol is UDP-based, HTTP-layer WAF/IDS controls do not apply. This issue affects Apache Camel: from 4.14.0 through 4.14.5, from 4.18.0 before 4.18.1, 4.19.0.

Users are recommended to upgrade to version 4.18.1 or 4.19.0, fixing the issue.