D-Link DIR-820L 1.05B03 was discovered to contain remote command execution (RCE) vulnerability via HTTP POST to get set ccp.

A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/setprohibiting via the corresponding function, triggering remote command execution.

UNSUPPORTED WHEN ASSIGNED A vulnerability, which was classified as very critical, has been found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. This issue affects some unknown processing of the file /cgi-bin/nassharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument user with the input messagebus leads to hard-coded credentials. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-259283. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

UNSUPPORTED WHEN ASSIGNED A vulnerability, which was classified as critical, was found in D-Link DNS-320L, DNS-325, DNS-327L and DNS-340L up to 20240403. Affected is an unknown function of the file /cgi-bin/nassharing.cgi of the component HTTP GET Request Handler. The manipulation of the argument system leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-259284. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

UNSUPPORTED WHEN ASSIGNED A vulnerability was found in D-Link DIR-859 1.06B01. It has been rated as critical. Affected by this issue is some unknown functionality of the file /hedwig.cgi of the component HTTP POST Request Handler. The manipulation of the argument service with the input ../../../../htdocs/webinc/getcfg/DHCPS6.BRIDGE-1.xml leads to path traversal. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. VDB-251666 is the identifier assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced.

D-Link DIR-820 routers contain an OS command injection vulnerability that allows a remote, unauthenticated attacker to escalate privileges to root via a crafted payload with the pingaddr parameter to ping.ccp.

D-Link DNR-322L contains a download of code without integrity check vulnerability that could allow an authenticated attacker to execute OS level commands on the device. The impacted products could be end-of-life (EoL) and/or end-of-service (EoS). Users should discontinue product utilization.

D-Link Go-RT-AC750 GORTAC750revAv101b03 and GO-RT-AC750revBFWv200b02 are vulnerable to Buffer Overflow via cgibin, hnapmain,

A remote code execution vulnerability exists in all series H/W revisions routers via the DDNS function in ncc2 binary file.

An informtion disclosure issue exists in D-LINK-DIR-605 B2 Firmware Version : 2.01MT. An attacker can obtain a user name and password by forging a post request to the / getcfg.php page

UNSUPPORTED WHEN ASSIGNED D-Link DIR-610 devices allow Remote Command Execution via the cmd parameter to command.php. NOTE: This vulnerability only affects products that are no longer supported by the maintainer.

An issue was discovered on D-Link DIR-825 R1 devices through 3.0.1 before 2020-11-20. A buffer overflow in the web interface allows attackers to achieve pre-authentication remote code execution.

D-Link DNS-320 FW v2.06B01 Revision Ax is affected by command injection in the systemmgr.cgi component, which can lead to remote arbitrary code execution.

An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. cgi-bin/ddnsenc.cgi allows authenticated command injection.

An issue was discovered on D-Link DCS-2530L before 1.06.01 Hotfix and DCS-2670L through 2.02 devices. The unauthenticated /config/getuser endpoint allows for remote administrator password disclosure.

D-Link DWL-2600AP 4.2.0.15 Rev A devices have an authenticated OS command injection vulnerability via the Save Configuration functionality in the Web interface, using shell metacharacters in the admin.cgi?action=configsave configBackup or downloadServerip parameter.

The UPnP endpoint URL /gena.cgi in the D-Link DIR-859 Wi-Fi router 1.05 and 1.06B01 Beta01 allows an Unauthenticated remote attacker to execute system commands as root, by sending a specially crafted HTTP SUBSCRIBE request to the UPnP service when connecting to the local network.

Unauthenticated remote code execution occurs in D-Link products such as DIR-655C, DIR-866L, DIR-652, and DHP-1565. The issue occurs when the attacker sends an arbitrary input to a "PingTest" device common gateway interface that could lead to common injection. An attacker who successfully triggers the command injection could achieve full system compromise. Later, it was independently found that these are also affected: DIR-855L, DAP-1533, DIR-862L, DIR-615, DIR-835, and DIR-825.

The loginmgr.cgi script in D-Link DNS-320 through 2.05.B10 is vulnerable to remote command injection.

Multiple D-Link routers contain an unspecified vulnerability that allows for execution of OS commands.

D-Link DSL-2750B devices before 1.05 allow remote unauthenticated command injection via the login.cgi cli parameter, as exploited in the wild in 2016 through 2022.

setSystemCommand on D-Link DCS-930L devices before 2.12 allows a remote attacker to execute code via an OS command in the SystemCommand parameter.

The D-Link DIR-645 Wired/Wireless Router Rev. Ax with firmware 1.04b12 and earlier allows remote attackers to execute arbitrary commands via a GetDeviceSettings action to the HNAP interface.

The ping tool in multiple D-Link and TRENDnet devices allow remote attackers to execute arbitrary code via the pingaddr parameter to ping.ccp.

D-Link DIR-600 routers contain a cross-site request forgery (CSRF) vulnerability that allows an attacker to change router configurations by hijacking an existing administrator session.

Multiple cross-site scripting (XSS) vulnerabilities in D-Link DSL-2760U Gateway (Rev. E1) allow remote authenticated users to inject arbitrary web script or HTML via the (1) ntpServer1 parameter to sntpcfg.cgi, username parameter to (2) ddnsmngr.cmd or (3) todmngr.tod, (4) TodUrlAdd parameter to urlfilter.cmd, (5) appName parameter to scprttrg.cmd, (6) fltName in an add action or (7) rmLst parameter in a remove action to scoutflt.cmd, (8) groupName parameter to portmapcfg.cmd, (9) snmpRoCommunity parameter to snmpconfig.cgi, (10) fltName parameter to scinflt.cmd, (11) PolicyName in an add action or (12) rmLst parameter in a remove action to prmngr.cmd, (13) ippName parameter to ippcfg.cmd, (14) smbNetBiosName or (15) smbDirName parameter to samba.cgi, or (16) wlSsid parameter to wlcfg.wl.

The D-Link DIR-300 router stores cleartext passwords, which allows context-dependent attackers to obtain sensitive information via unspecified vectors.

A security flaw has been discovered in D-Link DIR-825 up to 2.10. Affected by this vulnerability is the function sub4106d4 of the file apply.cgi. The manipulation of the argument countdowntime results in buffer overflow. The attack can be executed remotely. The exploit has been released to the public and may be exploited. This vulnerability only affects products that are no longer supported by the maintainer.