By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743.
Last updated 24 July 2024
Last updated 24 July 2024
On BIG-IP 11.5.2-11.6.4 and Enterprise Manager 3.1.1, REST users with guest privileges may be able to escalate their privileges and run commands with admin privileges.
An excessive resource consumption flaw was found in the way the Linux kernel's networking subsystem processed TCP segments. If the Maximum Segment Size (MSS) of a TCP connection was set to low values, such as 48 bytes, it can leave as little as 8 bytes for the user data, which significantly increases the Linux kernel's resource (CPU, Memory, and Bandwidth) utilization. A remote attacker could use this flaw to cause a denial of service (DoS) by repeatedly sending network traffic on a TCP connection with low TCP MSS.
In BIG-IP 13.0.0-13.1.1.1, 12.1.0-12.1.3.7, 11.6.1-11.6.3.2, or 11.5.1-11.5.8 or Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.
On BIG-IP 14.0.0-14.0.0.2, 13.0.0-13.1.1.1, or 12.1.0-12.1.3.7, or Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.
On BIG-IP 14.0.x, 13.x, 12.x, and 11.x, Enterprise Manager 3.1.1, BIG-IQ 6.x, 5.x, and 4.x, and iWorkflow 2.x, the passphrases for SNMPv3 users and trap destinations that are used for authentication and privacy are not handled by the BIG-IP system Secure Vault feature; they are written in the clear to the various configuration files.
In BIG-IP 14.0.0-14.0.0.2 or 13.0.0-13.1.1.1 or Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.
A flaw was found in the Linux kernels with commit b6a2fea39318 ("mm: variable length argument support", from July 19, 2007) but without commit da029c11e6b1 ("exec:Limit arg stack to at most 75% of STKLIM", from July 7, 2017). An integer overflow in the Linux kernel's createelftables() function. A local attacker can exploit this vulnerability via a SUID-root binary and obtain full root privileges.
Referenced commits: b6a2fea39318 ("mm: variable length argument support", from July 19, 2007) https://github.com/torvalds/linux/commit/b6a2fea39318e43fee84fa7b0b90d68bed92d2ba
da029c11e6b1 ("exec: Limit arg stack to at most 75% of STKLIM", from July 7, 2017) https://github.com/torvalds/linux/commit/da029c11e6b12f321f36dac8771e833b65cec962
Additional references: https://www.qualys.com/2018/09/25/cve-2018-14634/mutagen-astronomy-integer-overflow-linux-createelftables-cve-2018-14634.txt
On F5 BIG-IP 13.1.0-13.1.0.3, 13.0.0, 12.1.0-12.1.3.1, 11.6.1-11.6.3.1, 11.5.1-11.5.5, or 11.2.1 and Enterprise Manager 3.1.1, when authenticated administrative users run commands in the Traffic Management User Interface (TMUI), also referred to as the BIG-IP Configuration utility, restrictions on allowed commands may not be enforced.
An attacker may be able to cause a denial-of-service (DoS) attack against the sshd component in F5 BIG-IP, Enterprise Manager, BIG-IQ, and iWorkflow.
Memory leak in the last hop kernel module in F5 BIG-IP LTM, GTM, and Link Controller 10.1.x, 10.2.x before 10.2.4 HF13, 11.x before 11.2.1 HF15, 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.x before HF6, BIG-IP AAM 11.4.x, 11.5.x before 11.5.3 HF2 and 11.6.0 before HF6, BIG-IP AFM and PEM 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.0 before HF6, BIG-IP Analytics 11.x before 11.2.1 HF15, 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.0 before HF6, BIG-IP APM and ASM 10.1.0 through 10.2.4, 11.x before 11.2.1 HF15, 11.3.x, 11.4.x, 11.5.x before 11.5.3 HF2, and 11.6.0 before HF6, BIG-IP Edge Gateway, WebAccelerator, and WOM 10.1.x, 10.2.x before 10.2.4 HF13, 11.x before 11.2.1 HF15, and 11.3.0, BIG-IP PSM 10.1.x, 10.2.x before 10.2.4 HF13, 11.x before 11.2.1 HF15, 11.3.x, and 11.4.x before 11.4.1 HF, Enterprise Manager 3.0.0 through 3.1.1, BIG-IQ Cloud and Security 4.0.0 through 4.5.0, BIG-IQ Device 4.2.0 through 4.5.0, and BIG-IQ ADC 4.5.0 might allow remote attackers to cause a denial of service (memory consumption) via a large number of crafted UDP packets.
racoon/gssapi.c in IPsec-Tools 0.8.2 allows remote attackers to cause a denial of service (NULL pointer dereference and IKE daemon crash) via a series of crafted UDP requests.
F5 BIG-IP appliances 9.x before 9.4.8-HF5, 10.x before 10.2.4, 11.0.x before 11.0.0-HF2, and 11.1.x before 11.1.0-HF3, and Enterprise Manager before 2.1.0-HF2, 2.2.x before 2.2.0-HF1, and 2.3.x before 2.3.0-HF3, use a single SSH private key across different customers' installations and do not properly restrict access to this key, which makes it easier for remote attackers to perform SSH logins via the PubkeyAuthentication option.