ping in iputils before 20250602 allows a denial of service
A flaw was found in GnuTLS, which relies on libtasn1 for ASN.1 data processing. Due to an inefficient algorithm in libtasn1, decoding certain DER-encoded certificate data can take excessive time, leading to increased resource consumption. This flaw allows a remote attacker to send a specially crafted certificate, causing GnuTLS to become unresponsive or slow, resulting in a denial-of-service condition.
Issue summary: A timing side-channel which could potentially allow recovering the private key exists in the ECDSA signature computation.
Impact summary: A timing side-channel in ECDSA signature computations could allow recovering the private key by an attacker. However, measuring the timing would require either local access to the signing application or a very fast network connection with low latency.
There is a timing signal of around 300 nanoseconds when the top word of the inverted ECDSA nonce value is zero. This can happen with significant probability only for some of the supported elliptic curves. In particular the NIST P-521 curve is affected. To be able to measure this leak, the attacker process must either be located in the same physical computer or must have a very fast network connection with low latency. For that reason the severity of this vulnerability is Low.
Issue summary: Some non-default TLS server configurations can cause unbounded memory growth when processing TLSv1.3 sessions
Impact summary: An attacker may exploit certain server configurations to trigger unbounded memory growth that would lead to a Denial of Service
This problem can occur in TLSv1.3 if the non-default SSLOPNOTICKET option is being used (but not if earlydata support is also configured and the default anti-replay protection is in use). In this case, under certain conditions, the session cache can get into an incorrect state and it will fail to flush properly as it fills. The session cache will continue to grow in an unbounded manner. A malicious client could deliberately create the scenario for this failure to force a Denial of Service. It may also happen by accident in normal operation.
This issue only affects TLS servers supporting TLSv1.3. It does not affect TLS clients.
The FIPS modules in 3.2, 3.1 and 3.0 are not affected by this issue. OpenSSL 1.0.2 is also not affected by this issue.
Jinja is an extensible templating engine. The xmlattr filter in affected versions of Jinja accepts keys containing non-attribute characters. XML/HTML attributes cannot contain spaces, /, >, or =, as each would then be interpreted as starting a separate attribute. If an application accepts keys (as opposed to only values) as user input, and renders these in pages that other users see as well, an attacker could use this to inject other attributes and perform XSS. The fix for CVE-2024-22195 only addressed spaces but not other characters. Accepting keys as user input is now explicitly considered an unintended use case of the xmlattr filter, and code that does so without otherwise validating the input should be flagged as insecure, regardless of Jinja version. Accepting values as user input continues to be safe. This vulnerability is fixed in 3.1.4.
Excessive time spent in DH check / generation with large Q parameter value
Issue summary: Processing some specially crafted ASN.1 object identifiers or data containing them may be very slow.
Impact summary: Applications that use OBJobj2txt() directly, or use any of the OpenSSL subsystems OCSP, PKCS7/SMIME, CMS, CMP/CRMF or TS with no message size limit may experience notable to very long delays when processing those messages, which may lead to a Denial of Service.
DISPUTED Xmlsoft Libxml2 v2.11.0 was discovered to contain an out-of-bounds read via the xmlSAX2StartElement() function at /libxml2/SAX2.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via supplying a crafted XML file. NOTE: the vendor's position is that the product does not support the legacy SAX1 interface with custom callbacks; there is a crash even without crafted input.
A timing based side channel exists in the OpenSSL RSA Decryption implementation which could be sufficient to recover a plaintext across a network in a Bleichenbacher style attack. To achieve a successful decryption an attacker would have to be able to send a very large number of trial messages for decryption. The vulnerability affects all RSA padding modes: PKCS#1 v1.5, RSA-OEAP and RSASVE.
For example, in a TLS connection, RSA is commonly used by a client to send an encrypted pre-master secret to the server. An attacker that had observed a genuine connection between a client and a server could use this flaw to send trial messages to the server and record the time taken to process them. After a sufficiently large number of messages the attacker could recover the pre-master secret used for the original connection and thus be able to decrypt the application data sent over that connection.
Impact Passing HTML containing <option> elements from untrusted sources - even after sanitizing them - to one of jQuery's DOM manipulation methods (i.e. .html(), .append(), and others) may execute untrusted code.
Patches This problem is patched in jQuery 3.5.0.
Workarounds To workaround this issue without upgrading, use DOMPurify with its SAFEFORJQUERY option to sanitize the HTML string before passing it to a jQuery method.
References https://blog.jquery.com/2020/04/10/jquery-3-5-0-released/
For more information If you have any questions or comments about this advisory, search for a relevant issue in the jQuery repo. If you don't find an answer, open a new issue.
Incomplete Cleanup vulnerability in Apache Tomcat.
When recycling various internal objects in Apache Tomcat from 11.0.0-M1 through 11.0.0-M11, from 10.1.0-M1 through 10.1.13, from 9.0.0-M1 through 9.0.80 and from 8.5.0 through 8.5.93, an error could cause Tomcat to skip some parts of the recycling process leading to information leaking from the current request/response to the next.
Users are recommended to upgrade to version 11.0.0-M12 onwards, 10.1.14 onwards, 9.0.81 onwards or 8.5.94 onwards, which fixes the issue.
In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.
A flaw has been discovered in GnuTLS where an application crash can be induced when attempting to verify a specially crafted .pem bundle using the "certtool --verify-chain" command.
Last updated 11 July 2025
Accessibility. A privacy issue was addressed with improved private data redaction for log entries.
Impact Passing HTML from untrusted sources - even after sanitizing it - to one of jQuery's DOM manipulation methods (i.e. .html(), .append(), and others) may execute untrusted code.
Patches This problem is patched in jQuery 3.5.0.
Workarounds To workaround the issue without upgrading, adding the following to your code:
js jQuery.htmlPrefilter = function( html ) { return html; };
You need to use at least jQuery 1.12/2.2 or newer to be able to apply this workaround.
References https://blog.jquery.com/2020/04/10/jquery-3-5-0-released/ https://jquery.com/upgrade-guide/3.5/
For more information If you have any questions or comments about this advisory, search for a relevant issue in the jQuery repo. If you don't find an answer, open a new issue.
If an error occurred (including exceeding limits) during the processing of a multipart upload, temporary copies of the uploaded parts written to disc were not cleaned up immediately but left for the garbage collection process to delete. Depending on JVM settings, application memory usage and application load, it was possible that space for the temporary copies of uploaded parts would be filled faster than GC cleared it, leading to a DoS.
This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.11, from 10.1.0-M1 through 10.1.46, from 9.0.0.M1 through 9.0.109.
The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. Users are recommended to upgrade to version 11.0.12 or later, 10.1.47 or later or 9.0.110 or later which fixes the issue.
In the Linux kernel, the following vulnerability has been resolved:
sched/membarrier: reduce the ability to hammer on sysmembarrier
On some systems, sysmembarrier can be very expensive, causing overall slowdowns for everything. So put a lock on the path in order to serialize the accesses to prevent the ability for this to be called at too high of a frequency and saturate the machine.
c-ares is a C library for asynchronous DNS requests. aresreadline() is used to parse local configuration files such as /etc/resolv.conf, /etc/nsswitch.conf, the HOSTALIASES file, and if using a c-ares version prior to 1.27.0, the /etc/hosts file. If any of these configuration files has an embedded NULL character as the first character in a new line, it can lead to attempting to read memory prior to the start of the given buffer which may result in a crash. This issue is fixed in c-ares 1.27.0. No known workarounds exist.
Jinja is an extensible templating engine. Special placeholders in the template allow writing code similar to Python syntax. It is possible to inject arbitrary HTML attributes into the rendered HTML template, potentially leading to Cross-Site Scripting (XSS). The Jinja xmlattr filter can be abused to inject arbitrary HTML attribute keys and values, bypassing the auto escaping mechanism and potentially leading to XSS. It may also be possible to bypass attribute validation checks if they are blacklist-based.
An issue was discovered in Qt before 5.15.15, 6.x before 6.2.9, and 6.3.x through 6.5.x before 6.5.2. Certificate validation for TLS does not always consider whether the root of a chain is a configured CA certificate.
Apache Tomcat 10.0.0-M1 to 10.0.6, 9.0.0.M1 to 9.0.46 and 8.5.0 to 8.5.66 did not correctly parse the HTTP transfer-encoding request header in some circumstances leading to the possibility to request smuggling when used with a reverse proxy. Specifically: - Tomcat incorrectly ignored the transfer encoding header if the client declared it would only accept an HTTP/1.0 response; - Tomcat honoured the identify encoding; and - Tomcat did not ensure that, if present, the chunked encoding was the final encoding.
In the Linux kernel, the following vulnerability has been resolved:
netfilter: tproxy: bail out if IP has been disabled on the device
syzbot reports: general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] [..] RIP: 0010:nftproxyladdr4+0xb7/0x340 net/ipv4/netfilter/nftproxyipv4.c:62 Call Trace: nfttproxyevalv4 net/netfilter/nfttproxy.c:56 [inline] nfttproxyeval+0xa9a/0x1a00 net/netfilter/nfttproxy.c:168
indevgetrcu() can return NULL, so check for this.
A flaw was found in GnuTLS. The Minerva attack is a cryptographic vulnerability that exploits deterministic behavior in systems like GnuTLS, leading to side-channel leaks. In specific scenarios, such as when using the GNUTLSPRIVKEYFLAGREPRODUCIBLE flag, it can result in a noticeable step in nonce size from 513 to 512 bits, exposing a potential timing side-channel.
In libxml2 before 2.10.4, parsing of certain invalid XSD schemas can lead to a NULL pointer dereference and subsequently a segfault. This occurs in xmlSchemaFixupComplexType in xmlschemas.c.
CVE-2023-5981 A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding. CVE-2024-0553 A vulnerability was found in GnuTLS. The response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from the response times of ciphertexts with correct PKCS#1 v1.5 padding. This issue may allow a remote attacker to perform a timing side-channel attack in the RSA-PSK key exchange, potentially leading to the leakage of sensitive data. CVE-2024-0553 is designated as an incomplete resolution for CVE-2023-5981.
A vulnerability was found that the response times to malformed ciphertexts in RSA-PSK ClientKeyExchange differ from response times of ciphertexts with correct PKCS#1 v1.5 padding.
Issue summary: Generating excessively long X9.42 DH keys or checking excessively long X9.42 DH keys or parameters may be very slow. Impact summary: Applications that use the functions DHgeneratekey() to generate an X9.42 DH key may experience long delays. Likewise, applications that use DHcheckpubkey(), DHcheckpubkeyex() or EVPPKEYpubliccheck() to check an X9.42 DH key or X9.42 DH parameters may experience long delays. Where the key or parameters that are being checked have been obtained from an untrusted source this may lead to a Denial of Service. While DHcheck() performs all the necessary checks (as of CVE-2023-3817), DHcheckpubkey() doesn't make any of these checks, and is therefore vulnerable for excessively large P and Q parameters. Likewise, while DHgeneratekey() performs a check for an excessively large P, it doesn't check for an excessively large Q. An application that calls DHgeneratekey() or DHcheckpubkey() and supplies a key or parameters obtained from an untrusted source could be vulnerable to a Denial of Service attack. DHgeneratekey() and DHcheckpubkey() are also called by a number of other OpenSSL functions. An application calling any of those other functions may similarly be affected. The other functions affected by this are DHcheckpubkeyex(), EVPPKEYpubliccheck(), and EVPPKEYgenerate(). Also vulnerable are the OpenSSL pkey command line application when using the "-pubcheck" option, as well as the OpenSSL genpkey command line application. The OpenSSL SSL/TLS implementation is not affected by this issue. The OpenSSL 3.0 and 3.1 FIPS providers are not affected by this issue.
A Speculative Race Condition (SRC) vulnerability that impacts modern CPU architectures supporting speculative execution (related to Spectre V1) has been disclosed. An unauthenticated attacker can exploit this vulnerability to disclose arbitrary data from the CPU using race conditions to access the speculative executable code paths.
Buffer Overflow vulnerability in libbpf 1.5.0 allows a local attacker to execute arbitrary code via the bpfobjectinitprog function of libbpf.