See how ieee compares to other vendors in security performance
The IEEE 802.11 standard sometimes enables an adversary to trick a victim into connecting to an unintended or untrusted network with Home WEP, Home WPA3 SAE-loop. Enterprise 802.1X/EAP, Mesh AMPE, or FILS, aka an "SSID Confusion" issue. This occurs because the SSID is not always used to derive the pairwise master key or session keys, and because there is not a protected exchange of an SSID during a 4-way handshake.
A flaw was found in the Linux kernels wifi implementation. An attacker within wireless broadcast range can inject custom data into the wireless communication circumventing checks on the data. This can cause the frame to pass checks and be considered a valid frame of a different type.
Layer 2 network filtering capabilities such as IPv6 RA guard can be bypassed using LLC/SNAP headers with invalid length and Ethernet to Wifi frame conversion (and optionally VLAN0 headers).
Layer 2 network filtering capabilities such as IPv6 RA guard can be bypassed using LLC/SNAP headers with invalid length (and optionally VLAN0 headers)
Layer 2 network filtering capabilities such as IPv6 RA guard or ARP inspection can be bypassed using combinations of VLAN 0 headers and LLC/SNAP headers.
Layer 2 network filtering capabilities such as IPv6 RA guard can be bypassed using combinations of VLAN 0 headers, LLC/SNAP headers, and converting frames from Ethernet to Wifi and its reverse.
IEEE P802.11-REVme D1.1 through D7.0 allows FragAttacks against mesh networks. In mesh networks using Wi-Fi Protected Access (WPA, WPA2, or WPA3) or Wired Equivalent Privacy (WEP), an adversary can exploit this vulnerability to inject arbitrary frames towards devices that support receiving non-SSP A-MSDU frames. NOTE: this issue exists because of an incorrect fix for CVE-2020-24588. P802.11-REVme, as of early 2025, is a planned release of the 802.11 standard.
The IEEE 802.11 specifications through 802.11ax allow physically proximate attackers to intercept (possibly cleartext) target-destined frames by spoofing a target's MAC address, sending Power Save frames to the access point, and then sending other frames to the access point (such as authentication frames or re-association frames) to remove the target's original security context. This behavior occurs because the specifications do not require an access point to purge its transmit queue before removing a client's pairwise encryption key.
A flaw was found in the Linux kernel's wifi implementation wherein an attacker within wireless range is able to abuse a logic flaw in the wifi implementation by reassembling packets from multiple fragments under different keys and they would be treated as valid. This allows an attacker to send a fragment under an incorrect key and be treated as a valid fragment under the new key.
Upstream patch: https://lore.kernel.org/linux-wireless/20210511200110.3f8290e59823.I622a67769ed39257327a362cfc09c812320eb979@changeid/
A flaw was found in the Linux kernels implementation of wifi fragmentation handling. An attacker with the ability to transmit within the wireless transmission range of an access point can abuse a flaw where previous contents of wifi fragments can be unintentionally transmitted to another device.
A design error in the IEEE1394 specification allows attackers with physical access to a device to read and write to sensitive memory using a modified FireWire/IEEE 1394 client, thus bypassing intended restrictions that would normally require greater degrees of physical access to exploit. NOTE: this was reported in 2008 to affect Windows Vista, but some Linux-based operating systems have protection mechanisms against this attack.
The Clear Channel Assessment (CCA) algorithm in the IEEE 802.11 wireless protocol, when using DSSS transmission encoding, allows remote attackers to cause a denial of service via a certain RF signal that causes a channel to appear busy (aka "jabber"), which prevents devices from transmitting data.