Apache Tomcat contains a path equivalence vulnerability that allows a remote attacker to execute code, disclose information, or inject malicious content via a partial PUT request. This vulnerability can be chained with CVE‑2026‑34486.

AMI MegaRAC SPx contains an authentication bypass by spoofing vulnerability in the Redfish Host Interface. A successful exploitation of this vulnerability may lead to a loss of confidentiality, integrity, and/or availability.

NetApp OnCommand Balance before 4.2P2 contains a "default privileged account," which allows remote attackers to gain privileges via unspecified vectors.

The installer in NetApp OnCommand Workflow Automation before 2.2.1P1 and 3.x before 3.0P1 sets up the Java Debugging Wire Protocol (JDWP) service, which allows remote attackers to execute arbitrary code via unspecified vectors.

An issue was discovered in aiopoll() in fs/aio.c in the Linux kernel through 5.0.4. A file may be released by aiopollwake() if an expected event is triggered immediately (e.g., by the close of a pair of pipes) after the return of vfspoll(), and this will cause a use-after-free.

Multiple unspecified vulnerabilities in NetApp Data ONTAP, as used on NetApp and IBM eServer platforms, allow remote attackers to execute arbitrary commands, cause a denial of service (system crash), or obtain sensitive information, probably related to insufficient access control for HTTP requests. NOTE: this may overlap CVE-2008-3160.

Element OS versions prior to 1.8P1 and 12.2 are susceptible to a vulnerability that could allow an unauthenticated remote attacker to perform arbitrary code execution.

IBM Cognos Analytics 11.0 and 11.1 DQM API allows submitting of all control requests in unauthenticated sessions. This allows a remote attacker who can access a valid CA endpoint to read and write files to the Cognos Analytics system. IBM X-Force ID: 183903.

Summary

Log4j versions prior to 2.16.0 are subject to a remote code execution vulnerability via the ldap JNDI parser. As per Apache's Log4j security guide: Apache Log4j2 <=2.14.1 JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.16.0, this behavior has been disabled by default.

Log4j version 2.15.0 contained an earlier fix for the vulnerability, but that patch did not disable attacker-controlled JNDI lookups in all situations. For more information, see the Updated advice for version 2.16.0 section of this advisory.

Impact

Logging untrusted or user controlled data with a vulnerable version of Log4J may result in Remote Code Execution (RCE) against your application. This includes untrusted data included in logged errors such as exception traces, authentication failures, and other unexpected vectors of user controlled input.

Affected versions

Any Log4J version prior to v2.15.0 is affected to this specific issue.

The v1 branch of Log4J which is considered End Of Life (EOL) is vulnerable to other RCE vectors so the recommendation is to still update to 2.16.0 where possible.

Security releases Additional backports of this fix have been made available in versions 2.3.1, 2.12.2, and 2.12.3

Affected packages Only the org.apache.logging.log4j:log4j-core package is directly affected by this vulnerability. The org.apache.logging.log4j:log4j-api should be kept at the same version as the org.apache.logging.log4j:log4j-core package to ensure compatability if in use.

Remediation Advice

Updated advice for version 2.16.0

The Apache Logging Services team provided updated mitigation advice upon the release of version 2.16.0, which disables JNDI by default and completely removes support for message lookups. Even in version 2.15.0, lookups used in layouts to provide specific pieces of context information will still recursively resolve, possibly triggering JNDI lookups. This problem is being tracked as CVE-2021-45046. More information is available on the GitHub Security Advisory for CVE-2021-45046.

Users who want to avoid attacker-controlled JNDI lookups but cannot upgrade to 2.16.0 must ensure that no such lookups resolve to attacker-provided data and ensure that the the JndiLookup class is not loaded.

Please note that Log4J v1 is End Of Life (EOL) and will not receive patches for this issue. Log4J v1 is also vulnerable to other RCE vectors and we recommend you migrate to Log4J 2.16.0 where possible.

Certain versions between 2.x to 5.x (refer to advisory) of the NetApp Service Processor firmware were shipped with a default account enabled that could allow unauthorized arbitrary command execution. Any platform listed in the advisory Impact section may be affected and should be upgraded to a fixed version of Service Processor firmware IMMEDIATELY.

A Vulnerability in Brocade Network Advisor versions before 14.1.0 could allow a remote unauthenticated attacker to execute arbitray code. The vulnerability could also be exploited to execute arbitrary OS Commands.

Apache ActiveMQ contains a deserialization of untrusted data vulnerability that may allow a remote attacker with network access to a broker to run shell commands by manipulating serialized class types in the OpenWire protocol to cause the broker to instantiate any class on the classpath.

SnapCenter versions prior to 6.0.1P1 and 6.1P1 are susceptible to a vulnerability which may allow an authenticated SnapCenter Server user to become an admin user on a remote system where a SnapCenter plug-in has been installed.

A flaw was found in xstream. A remote attacker, who has sufficient rights, can execute commands of the host by manipulating the processed input stream. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

Apache Struts Jakarta Multipart parser allows for malicious file upload using the Content-Type value, leading to remote code execution.

Under certain configurations of --tlsCAFile and tls.CAFile, MongoDB Server may skip peer certificate validation which may result in untrusted connections to succeed. This may effectively reduce the security guarantees provided by TLS and open connections that should have been closed due to failing certificate validation. This issue affects MongoDB Server v7.0 versions prior to and including 7.0.5, MongoDB Server v6.0 versions prior to and including 6.0.13, MongoDB Server v5.0 versions prior to and including 5.0.24 and MongoDB Server v4.4 versions prior to and including 4.4.28.

Required Configuration : A server process will allow incoming connections to skip peer certificate validation if the server process was started with TLS enabled (net.tls.mode set to allowTLS, preferTLS, or requireTLS) and without a net.tls.CAFile configured.

A flaw was discovered in FasterXML jackson-databind, where it would permit polymorphic deserialization of malicious objects using the ehcache and logback JNDI gadgets when used in conjunction with polymorphic type handling methods such as enableDefaultTyping() or when @JsonTypeInfo is using Id.CLASS or Id.MINIMALCLASS or in any other way which ObjectMapper.readValue might instantiate objects from unsafe sources. An attacker could use this flaw to execute arbitrary code.

ONTAP Select Deploy administration utility versions 9.12.1.x, 9.13.1.x and 9.14.1.x contain hard-coded credentials that could allow an attacker to view Deploy configuration information and modify the account credentials.

In the Linux kernel, the following vulnerability has been resolved:

NFSD: Fix nfsd4encodefattr4() crasher

Ensure that args.acl is initialized early. It is used in an unconditional call to kfree() on the way out of nfsd4encodefattr4().

Apache. This is a vulnerability in open source code and Apple Software among the affected projects. The CVE-ID was assigned by a third party. Learn more about the issue and CVE-ID at cve.org.

CVE-2024-38474 Substitution encoding issue in modrewrite in Apache HTTP Server 2.4.59 and earlier allows attacker to execute scripts in directories permitted by the configuration but not directly reachable by any URL or source disclosure of scripts meant to only to be executed as CGI. Users are recommended to upgrade to version 2.4.60, which fixes this issue. Some RewriteRules that capture and substitute unsafely will now fail unless rewrite flag "UnsafeAllow3F" is specified. CVE-2024-38475 Improper escaping of output in modrewrite in Apache HTTP Server 2.4.59 and earlier allows an attacker to map URLs to filesystem locations that are permitted to be served by the server but are not intentionally/directly reachable by any URL, resulting in code execution or source code disclosure. Substitutions in server context that use a backreferences or variables as the first segment of the substitution are affected. Some unsafe RewiteRules will be broken by this change and the rewrite flag "UnsafePrefixStat" can be used to opt back in once ensuring the substitution is appropriately constrained.

A use after free can have a range of potential consequences such as the corruption of valid data, crashes or execution of arbitrary code. However, only applications that directly call the SSLfreebuffers function are affected by this issue. Applications that do not call this function are not vulnerable. Our investigations indicate that this function is rarely used by applications.

The SSLfreebuffers function is used to free the internal OpenSSL buffer used when processing an incoming record from the network. The call is only expected to succeed if the buffer is not currently in use. However, two scenarios have been identified where the buffer is freed even when still in use.

The first scenario occurs where a record header has been received from the network and processed by OpenSSL, but the full record body has not yet arrived. In this case calling SSLfreebuffers will succeed even though a record has only been partially processed and the buffer is still in use.

The second scenario occurs where a full record containing application data has been received and processed by OpenSSL but the application has only read part of this data. Again a call to SSLfreebuffers will succeed even though the buffer is still in use.

While these scenarios could occur accidentally during normal operation a malicious attacker could attempt to engineer a stituation where this occurs. We are not aware of this issue being actively exploited.

The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue.

OpenSSL 1.0.2 is also not affected by this issue.

OpenSSL 3.3, 3.2, 3.1, 3.0 and 1.1.1 are vulnerable to this issue.

OpenSSL 3.3 users should upgrade to OpenSSL 3.3.1 once it is released.

OpenSSL 3.2 users should upgrade to OpenSSL 3.2.2 once it is released.

OpenSSL 3.1 users should upgrade to OpenSSL 3.1.6 once it is released.

OpenSSL 3.0 users should upgrade to OpenSSL 3.0.14 once it is released.

OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1y once it is released (premium support customers only).

Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. The fix is also available in commit e5093133c3 (for 3.3), commit c88c3de510 (for 3.2), commit 704f725b96 (for 3.1) and commit b3f0eb0a29 (for 3.0) in the OpenSSL git repository. It is available to premium support customers in commit f7a045f314 (for 1.1.1).

This issue was reported on 10th April 2024 by William Ahern (Akamai). The fix was developed by Matt Caswell and Watson Ladd (Akamai).

Apache HTTP Server contains a path traversal vulnerability that allows an attacker to perform remote code execution if files outside directories configured by Alias-like directives are not under default �require all denied� or if CGI scripts are enabled. The original patch issued under this CVE ID is insufficient, please review remediation information under CVE-2021-42013.

Apache HTTP Server contains a path traversal vulnerability that allows an attacker to perform remote code execution if files outside directories configured by Alias-like directives are not under default require all denied or if CGI scripts are enabled. This CVE ID resolves an incomplete patch for CVE-2021-41773.

Apache Tomcat contains an unspecified vulnerability that allows for remote code execution if JmxRemoteLifecycleListener is used and an attacker can reach Java Management Extension (JMX) ports. This CVE exists because this listener wasn't updated for consistency with the Oracle patched issues for CVE-2016-3427 which affected credential types.

It was discovered that the RMI (Java Remote Method Invocation) server implementation in the JMX (Java Management Extensions) component of OpenJDK did not restrict which classes can be deserialized when deserializing authentication credentials. A remote unauthenticated attacker able to connect to a JMX port could possibly use this flaw trigger deserialization flaws.

gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4CONNMSGLEN is not sufficient for a trailing '\0' character.

Fixed bug (OOB access in ldapescape). (CVE-2024-8932)

Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability during JSP compilation in Apache Tomcat permits an RCE on case insensitive file systems when the default servlet is enabled for write (non-default configuration).

This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.0.97.

The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected.

Users are recommended to upgrade to version 11.0.2, 10.1.34 or 9.0.98, which fixes the issue.

Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in Apache Tomcat.

This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.1, from 10.1.0-M1 through 10.1.33, from 9.0.0.M1 through 9.0.97.

The mitigation for CVE-2024-50379 was incomplete.

Users running Tomcat on a case insensitive file system with the default servlet write enabled (readonly initialisation parameter set to the non-default value of false) may need additional configuration to fully mitigate CVE-2024-50379 depending on which version of Java they are using with Tomcat: - running on Java 8 or Java 11: the system property sun.io.useCanonCaches must be explicitly set to false (it defaults to true) - running on Java 17: the system property sun.io.useCanonCaches, if set, must be set to false (it defaults to false) - running on Java 21 onwards: no further configuration is required (the system property and the problematic cache have been removed)

Tomcat 11.0.3, 10.1.35 and 9.0.99 onwards will include checks that sun.io.useCanonCaches is set appropriately before allowing the default servlet to be write enabled on a case insensitive file system. Tomcat will also set sun.io.useCanonCaches to false by default where it can.