NETGEAR R6200V2 firmware versions through R6200v2-V1.0.3.1210.1.11 and R6300V2 firmware versions through R6300v2-V1.0.4.5210.0.93 allow remote authenticated attackers to execute arbitrary command via shell metacharacters in the ipv6fix.cgi ipv6wanipaddr, ipv6lanipaddr, ipv6wanlength, or ipv6lanlength parameters.

Command injection vulnerability was discovered in Netgear R6200 v2 firmware through R6200v2-V1.0.3.12 via binary /sbin/acosservice that could allow remote authenticated attackers the ability to modify values in the vulnerable parameter.

A path traversal attack in web interfaces of Netgear RAX35, RAX38, and RAX40 routers before v1.0.4.102, allows a remote unauthenticated attacker to gain access to sensitive restricted information, such as forbidden files of the web application, via sending a specially crafted HTTP packet.

A vulnerability was found in Netgear WNCE3001 1.0.0.50. It has been classified as critical. This affects the function httpd of the component HTTP POST Request Handler. The manipulation of the argument Host leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used.

A vulnerability was found in Netgear EX6100 1.0.2.281.1.138. It has been rated as critical. Affected by this issue is the function sub415EF8. The manipulation leads to stack-based buffer overflow. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

A vulnerability classified as critical has been found in Netgear EX6150 1.0.0.461.0.76. This affects the function sub410090. The manipulation leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer.

NETGEAR XR1000 before 1.0.0.74, XR1000v2 before 1.1.0.22, and XR500 before 2.3.2.134 allow remote code execution by unauthenticated users.

NETGEAR ProSAFE Network Management System UpLoadServlet Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Authentication is required to exploit this vulnerability.

The specific flaw exists within the UpLoadServlet class. The issue results from the lack of proper validation of a user-supplied path prior to using it in file operations. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-22724.

NETGEAR ProSAFE Network Management System UpLoadServlet Unrestricted File Upload Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Authentication is required to exploit this vulnerability.

The specific flaw exists within the UpLoadServlet class. The issue results from the lack of proper validation of user-supplied data, which can allow the upload of arbitrary files. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-22923.

NETGEAR ProSAFE Network Management System Default Credentials Local Privilege Escalation Vulnerability. This vulnerability allows local attackers to escalate privileges on affected installations of NETGEAR ProSAFE Network Management System. An attacker must first obtain the ability to execute low-privileged code on the target system in order to exploit this vulnerability.

The specific flaw exists within the product installer. The issue results from the use of default MySQL credentials. An attacker can leverage this vulnerability to escalate privileges and execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-22755.

NETGEAR ProSAFE Network Management System Tomcat Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of NETGEAR ProSAFE Network Management System. Authentication is required to exploit this vulnerability.

The specific flaw exists within the product installer. The issue results from the use of a vulnerable version of Apache Tomcat. An attacker can leverage this vulnerability to execute code in the context of SYSTEM. Was ZDI-CAN-22868.

Netgear D6220 with Firmware Version 1.0.0.80, D8500 with Firmware Version 1.0.3.60, R6700 with Firmware Version 1.0.2.26, and R6900 with Firmware Version 1.0.2.26 are vulnerable to Command Injection. If an attacker gains web management privileges, they can inject commands into the post request parameters, gaining shell privileges.

Netgear R6220 v1.1.0.1141.0.1 suffers from Incorrect Access Control, resulting in a command injection vulnerability.

setup.cgi on NETGEAR R6020 1.0.0.48 devices allows an admin to execute arbitrary shell commands via shell metacharacters in the ntpserver field.

Certain NETGEAR smart switches are affected by a \n injection in the web UI's password field, which - due to several faulty aspects of the authentication scheme - allows the attacker to create (or overwrite) a file with specific content (e.g., the "2" string). This leads to admin session crafting and therefore gaining full web UI admin privileges by an unauthenticated attacker. This affects GC108P before 1.0.8.2, GC108PP before 1.0.8.2, GS108Tv3 before 7.0.7.2, GS110TPP before 7.0.7.2, GS110TPv3 before 7.0.7.2, GS110TUP before 1.0.5.3, GS308T before 1.0.3.2, GS310TP before 1.0.3.2, GS710TUP before 1.0.5.3, GS716TP before 1.0.4.2, GS716TPP before 1.0.4.2, GS724TPP before 2.0.6.3, GS724TPv2 before 2.0.6.3, GS728TPPv2 before 6.0.8.2, GS728TPv2 before 6.0.8.2, GS750E before 1.0.1.10, GS752TPP before 6.0.8.2, GS752TPv2 before 6.0.8.2, MS510TXM before 1.0.4.2, and MS510TXUP before 1.0.4.2.

Certain NETGEAR smart switches are affected by an authentication hijacking race-condition vulnerability by an unauthenticated attacker who uses the same source IP address as an admin in the process of logging in (e.g., behind the same NAT device, or already in possession of a foothold on an admin's machine). This occurs because the multi-step HTTP authentication process is effectively tied only to the source IP address. This affects GC108P before 1.0.8.2, GC108PP before 1.0.8.2, GS108Tv3 before 7.0.7.2, GS110TPP before 7.0.7.2, GS110TPv3 before 7.0.7.2, GS110TUP before 1.0.5.3, GS308T before 1.0.3.2, GS310TP before 1.0.3.2, GS710TUP before 1.0.5.3, GS716TP before 1.0.4.2, GS716TPP before 1.0.4.2, GS724TPP before 2.0.6.3, GS724TPv2 before 2.0.6.3, GS728TPPv2 before 6.0.8.2, GS728TPv2 before 6.0.8.2, GS750E before 1.0.1.10, GS752TPP before 6.0.8.2, GS752TPv2 before 6.0.8.2, MS510TXM before 1.0.4.2, and MS510TXUP before 1.0.4.2.

The update process of the Circle Parental Control Service on various NETGEAR routers allows remote attackers to achieve remote code execution as root via a MitM attack. While the parental controls themselves are not enabled by default on the routers, the Circle update daemon, circled, is enabled by default. This daemon connects to Circle and NETGEAR to obtain version information and updates to the circled daemon and its filtering database. However, database updates from NETGEAR are unsigned and downloaded via cleartext HTTP. As such, an attacker with the ability to perform a MitM attack on the device can respond to circled update requests with a crafted, compressed database file, the extraction of which gives the attacker the ability to overwrite executable files with attacker-controlled code. This affects R6400v2 1.0.4.106, R6700 1.0.2.16, R6700v3 1.0.4.106, R6900 1.0.2.16, R6900P 1.3.2.134, R7000 1.0.11.123, R7000P 1.3.2.134, R7850 1.0.5.68, R7900 1.0.4.38, R8000 1.0.4.68, and RS400 1.5.0.68.

Certain NETGEAR devices are affected by privilege escalation. This affects D8500 before 1.0.3.44, R6400v2 before 1.0.2.66, R6700 before 1.0.2.6, R6700v3 before 1.0.2.66, R6900 before 1.0.2.4, R6900P before 1.3.2.126, R7000 before 1.0.9.42, R7000P before 1.3.2.126, R7100LG before 1.0.0.50, R7300DST before 1.0.0.70, R7900 before 1.0.3.10, R8300 before 1.0.2.130, and R8500 before 1.0.2.130.

Certain NETGEAR devices are affected by incorrect configuration of security settings. This affects D6200 before 1.1.00.40, D7000 before 1.0.1.78, R6020 before 1.0.0.42, R6080 before 1.0.0.42, R6120 before 1.0.0.66, R6260 before 1.1.0.78, R6700v2 before 1.2.0.76, R6800 before 1.2.0.76, R6900v2 before 1.2.0.76, R7450 before 1.2.0.76, AC2100 before 1.2.0.76, and AC2400 before 1.2.0.76.

NETGEAR WAC104 devices before 1.0.4.15 are affected by incorrect configuration of security settings.

Certain NETGEAR devices are affected by a buffer overflow by an unauthenticated attacker. This affects RAX35 before 1.0.3.94, RAX38 before 1.0.3.94, and RAX40 before 1.0.3.94.

Certain NETGEAR devices are affected by a stack-based buffer overflow by an authenticated user. This affects D3600 before 1.0.0.76, D6000 before 1.0.0.76, D6200 before 1.1.00.36, D7000 before 1.0.1.70, EX6200v2 before 1.0.1.78, EX7000 before 1.0.1.78, EX8000 before 1.0.1.186, JR6150 before 1.0.1.18, PR2000 before 1.0.0.28, R6020 before 1.0.0.42, R6050 before 1.0.1.18, R6080 before 1.0.0.42, R6120 before 1.0.0.46, R6220 before 1.1.0.80, R6260 before 1.1.0.64, R6300v2 before 1.0.4.34, R6700 before 1.0.2.6, R6700v2 before 1.2.0.36, R6800 before 1.2.0.36, R6900 before 1.0.2.4, R6900P before 1.3.1.64, R6900v2 before 1.2.0.36, R7000 before 1.0.9.42, R7000P before 1.3.1.64, R7800 before 1.0.2.60, R8900 before 1.0.4.12, R9000 before 1.0.4.12, and XR500 before 2.3.2.40.

NETGEAR R6400 devices before 1.0.1.70 are affected by a stack-based buffer overflow by an authenticated user.

NETGEAR R6400 devices before 1.0.1.52 are affected by a stack-based buffer overflow by an authenticated user.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400 before 1.0.1.50, R7900P before 1.4.1.50, R8000P before 1.4.1.50, RAX75 before 1.0.1.62, and RAX80 before 1.0.1.62.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects RAX200 before 1.0.4.120, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, RBK852 before 3.2.17.12, RBR850 before 3.2.17.12, and RBS850 before 3.2.17.12.

Certain NETGEAR devices are affected by out-of-bounds reads and writes. This affects R6400 before 1.0.1.70, RAX75 before 1.0.4.120, RAX80 before 1.0.4.120, and XR300 before 1.0.3.50.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6250 before 1.0.4.36, R6300v2 before 1.0.4.36, R6400 before 1.0.1.50, R6400v2 before 1.0.2.66, R6700v3 before 1.0.2.66, R6700 before 1.0.2.8, R6900 before 1.0.2.8, R7000 before 1.0.9.88, R6900P before 1.3.2.132, R7100LG before 1.0.0.52, R7900 before 1.0.3.10, R8000 before 1.0.4.46, R7900P before 1.4.1.50, R8000P before 1.4.1.50, and RAX80 before 1.0.1.40.

Certain NETGEAR devices are affected by command injection by an authenticated user. This affects R6400 before 1.0.1.52, R6400v2 before 1.0.4.84, R6700v3 before 1.0.4.84, R6700v2 before 1.2.0.62, R6900v2 before 1.2.0.62, and R7000P before 1.3.2.124.

Certain NETGEAR devices are affected by denial of service. This affects R6400v2 before 1.0.4.98, R6700v3 before 1.0.4.98, R7900 before 1.0.3.18, and R8000 before 1.0.4.46.