OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions 3.3.0 through 3.3.12 and 3.4.0 through 3.4.13 contain a heap buffer overflow in PyOpenEXR triggered by a channel-name key collision between literal and prefixed RGB channels. When separatechannels=false, PyOpenEXR maps each physical channel name through channelNameToRGBA() and coalesces the results into a shared RGB array. A crafted flat scanline EXR that contains both a literal channel such as left and prefixed channels such as left.R, left.G, and left.B causes these names to collide, so the wrapper reuses an undersized two-dimensional NumPy array for the coalesced RGB slices and writes out of bounds when OpenEXR.File(path) decodes the pixels. This issue is fixed in versions 3.3.13 and 3.4.14.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. From version 3.4.0 through 3.4.12, the HTJ2K decoder parses a header-length field (PLEN) from a chunk's compressed data but never checks that this value fits within the available buffer before using it. When decoding, it advances the codestream pointer by the attacker-supplied header size and passes the resulting offset and remaining length to the OpenJPH memory-input path, so a crafted value pushes the pointer past the end of the buffer and causes an out-of-bounds read. Because this field comes straight from attacker-controlled EXR chunk data, the flaw is reachable during normal decoding of an untrusted file. This issue is fixed in version 3.4.13.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. OpenEXR versions 3.2.0 through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13 are vulnerable on ILP32 builds to a heap out-of-bounds read. The issue occurs when a crafted RLE-compressed EXR causes the 64-bit unpacked size to truncate before allocation in OpenEXRCore decoding.c and unpack32bit() reads beyond the resulting buffer, allowing denial of service. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. OpenEXR versions 3.1.0 through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13 are vulnerable on ILP32 builds to an out-of-bounds write. When a crafted B44-compressed scanline EXR causes the logical scratch size to truncate before allocation and uncompressb44impl() writes using the attacker-controlled channel width, allowing denial of service and memory corruption. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. OpenEXR versions before 3.2.11, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13 are vulnerable on ILP32 builds to an out-of-bounds read. The vulnerability is reached when a crafted uncompressed deep-tile EXR causes the sample-count table size calculation in OpenEXRCore decoding.c to wrap before unpacksampletable() iterates over the full attacker-controlled tile dimensions, allowing denial of service. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. OpenEXR versions before 3.2.11, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13 can return an out-of-bounds pointer from TypedDeepImageChannel::row() when a crafted deep EXR has a nonzero dataWindow origin. This vulnerability occurs because the API combines zero-based row access with an absolute-coordinate-adjusted base pointer, allowing a crash or limited information disclosure. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions before 3.2.11, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13, a crafted tiled EXR can trigger a heap out-of-bounds write on 32-bit/ILP32 builds when read through the public TiledRgbaInputFile RGBA API. The file uses a small 40x40 dataWindow but a 65537x65537 tile size. On ILP32, the Array2D<Rgba> tile-conversion buffer size calculation overflows, allocates a much smaller heap buffer, and tile decode writes past that allocation. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. Versions before 3.2.11, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13 allow a crafted EXR with a nonzero dataWindow.min to make TypedFlatImageChannel::row() return an invalid heap pointer, causing out-of-bounds or use-after-free writes. This occurs when an application writes rows through FlatHalfChannel::row(). Affected consumers are tools, converters, render pipeline components, or image-processing services that accept untrusted EXR files and use FlatHalfChannel::row() on loaded images. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.1.0 through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13, an int32t multiplication in OpenEXRCore's unpacksampletable() can overflow while decoding a crafted deep tiled EXR file, producing an invalid pointer that leads to a read from an unmapped memory address and a crash. Because the overflow occurs in the standard decoding path (exrdecodingrun), any application that decodes deep tiled EXR files is affected. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14.

OpenEXR is the reference implementation and specification for the EXR high-dynamic-range image file format, widely used in the motion picture industry. Versions 3.4.0 through 3.4.12 contain a NULL pointer dereference in the OpenEXRCore function exrattrsetbytes(). The public setter validates the top-level exrattrbytest value pointer but does not verify that the nested typehint pointer is non-NULL when hintlength is greater than zero. When a caller supplies a positive hintlength together with a NULL typehint, exrattrbytescreate() allocates a destination type-hint buffer and then copies from the NULL source pointer, causing a deterministic crash. The flaw is reachable through the public OpenEXRCore C API and results in a denial of service. The issue is fixed in version 3.4.13.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.12, a reachable assertion failure in the HTJ2K decode path allows a crafted HTJ2K-compressed EXR file to cause an unconditional process abort in any application that calls exrstartread() on untrusted input, resulting in denial of service. The crash is triggered by a QCD marker whose lower five bits are zero, which OpenEXR passes into the vendored OpenJPH library while constructing the codestream and evaluating its quantization delta parameters. OpenJPH uses an assertion rather than a recoverable error to validate those bits, so any invalid value calls abort() directly and cannot be intercepted by surrounding error handling, a problem compounded by OpenEXR wrapping only its internal HT header parser in error handling while leaving the later codestream read and construction calls unprotected. This issue has been resolved in version 3.4.13.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.12, a crafted HTJ2K-compressed EXR file causes an unconditional process abort in any application that calls exrstartread() on untrusted input, resulting in denial of service. The crash is triggered by a QCD marker whose lower five bits are zero, which OpenEXR passes into the vendored OpenJPH library while constructing the codestream and evaluating its quantization delta parameters. OpenJPH uses an assertion rather than a recoverable error to validate those bits, so any invalid value calls abort() directly and cannot be intercepted by surrounding error handling, a problem compounded by OpenEXR wrapping only its internal HT header parser in error handling while leaving the later codestream read and construction calls unprotected. This issue has been resolved in version 3.4.13.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. From version 3.4.0 through 3.4.13, a crafted HTJ2K-compressed EXR can crash OpenEXR during normal decode. An HTJ2K-compressed EXR whose JPEG 2000 SIZ fields place the first tile outside the visible image can reach invalid tile and codeblock geometry in the vendored OpenJPH AVX2 decoder, causing a stack out-of-bounds write and denial of service. OpenEXR's HTJ2K path validates the decoded codestream dimensions against the EXR chunk size, but it does not reject SIZ image-offset/tile-grid geometry where the first tile does not intersect the image. This issue is fixed in version 3.4.14.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.11, the HTJ2K (High-Throughput JPEG 2000) decoder, htundoimpl() in OpenEXRCore is vulnerable to a heap-buffer-overflow READ. The htundoimp function copies decoded pixels out of a per-line OpenJPH buffer using the EXR channel's declared width as the iteration count. The codestream embedded in the EXR chunk can declare different (smaller) tile/line dimensions than the EXR header advertises, but htundoimpl() does not validate this — it pulls width 32-bit samples from curline->i32[] without checking the OpenJPH line buffer's actual length. A crafted EXR file produces a 4-byte heap-buffer-overflow READ immediately after a buffer allocated by ojph::local::codestream::finalizealloc(). The bug is reachable through the standard scanline-decode entry point used by every consumer of exrdecodingrun/Imf::checkOpenEXRFile, including thumbnailers, asset pipelines, and the exrcheck utility — i.e. any application that opens untrusted EXR files. The result is a deterministic crash (DoS) and potential adjacent-heap leak. This issue has been fixed in version 3.4.12.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.11, the HTJ2K (High-Throughput JPEG 2000) decoder, htundoimpl() in OpenEXRCore is vulnerable to a heap-buffer-overflow READ. The htundoimp function copies decoded pixels out of a per-line OpenJPH buffer using the EXR channel's declared width as the iteration count. The codestream embedded in the EXR chunk can declare different (smaller) tile/line dimensions than the EXR header advertises, but htundoimpl() does not validate this — it pulls width 32-bit samples from curline->i32[] without checking the OpenJPH line buffer's actual length. A crafted EXR file produces a 4-byte heap-buffer-overflow READ immediately after a buffer allocated by ojph::local::codestream::finalizealloc(). The bug is reachable through the standard scanline-decode entry point used by every consumer of exrdecodingrun/Imf::checkOpenEXRFile, including thumbnailers, asset pipelines, and the exrcheck utility — i.e. any application that opens untrusted EXR files. The result is a deterministic crash (DoS) and potential adjacent-heap leak. This issue has been fixed in version 3.4.12.

OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. In versions 3.4.0 through 3.4.11, an integer overflow in htundoimpl() in src/lib/OpenEXRCore/internalht.cpp leads to a heap-buffer overflow when decoding a crafted HTJ2K-compressed EXR file. decode->channels[i].width (int32t) is multiplied by bytesperelement in 32-bit signed arithmetic. With large widths (e.g., >= 536870912 for FLOAT data), this overflows, producing a corrupted offset that is later used for pointer arithmetic and can cause a heap out-of-bounds write. The same unchecked multiplication pattern appears in two other HTJ2K paths (bytes-per-line accumulation and pixel-line pointer advancement). As with related CVE-2026-34378 through CVE-2026-34589 fixes in other codecs, validating only after the multiplication is too late because the value may already be overflowed. This issue has been fixed in version 3.4.12.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, there is an integer overflow in ImageChannel::resize that leads to heap OOB write via OpenEXRUtil public API. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, readVariableLengthInteger() decodes a variable-length integer from untrusted EXR input without bounding the shift count. After enough continuation bytes, the code executes a left shift by 70 on a 64-bit value, which is undefined behavior. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, IDManifest::init() reconstructs strings from a prefix-compressed representation. If the previous string is longer than 255 bytes, the next string is expected to begin with a 2-byte prefix length. The code reads stringList[i][0] and stringList[i][1] without checking that the current string has at least two bytes. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, there is an integer overflow in ImageChannel::resize that leads to heap OOB write via OpenEXRUtil public API. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.4.0 through 3.4.9, 3.3.0 through 3.3.9, and 3.2.0 through 3.2.7, internaldwacompressor.h:1722 performs curc->width curc->height in int32 arithmetic without a (sizet) cast. This is the same overflow pattern fixed in other locations by the recent CVE-2026-34589 batch, but this line was missed. Versions 3.4.10, 3.3.10, and 3.2.8 contain a fix that addresses internaldwacompressor.h:1722.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.4.0 through 3.4.9, 3.3.0 through 3.3.9, and 3.2.0 through 3.2.7, internaldwacompressor.h:1040 performs chan->width chan->bytesperelement in int32 arithmetic without a (sizet) cast. This is the same overflow pattern fixed in other decoders by CVE-2026-34589/34588/34544, but this line was missed. Versions 3.4.10, 3.3.10, and 3.2.8 contain a fix that addresses internaldwacompressor.h:1040.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. In versions 3.4.0 through 3.4.9, 3.3.0 through 3.3.9, and 3.2.0 through 3.2.7, internaldwacompressor.h:1722 performs curc->width curc->height in int32 arithmetic without a (sizet) cast. This is the same overflow pattern fixed in other locations by the recent CVE-2026-34589 batch, but this line was missed. Versions 3.4.10, 3.3.10, and 3.2.8 contain a fix that addresses internaldwacompressor.h:1722.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. Versions 3.4.0 through 3.4.9 have a signed integer overflow vulnerability in OpenEXR's HTJ2K (High-Throughput JPEG 2000) decompression path. The htundoimpl() function in src/lib/OpenEXRCore/internalht.cpp accumulates a bytes-per-line value (bpl) using a 32-bit signed integer with no overflow guard. A crafted EXR file with 16,385 FLOAT channels at the HTJ2K maximum width of 32,767 causes bpl to overflow INTMAX, producing undefined behavior confirmed by UBSan. On an allocator-permissive host where the required ~64 GB allocation succeeds, the wrapped negative bpl value would subsequently be used as a per-scanline pointer advance, which would produce a heap out-of-bounds write. On a memory-constrained host, the allocation fails before htundoimpl() is entered. This is the second distinct integer overflow in htundoimpl(). CVE-2026-34545 addressed a different overflow in the same function — the int16t p pixel-loop counter at line ~302 that overflows when iterating over channels whose width exceeds 32,767. The CVE-2026-34545 fix did not touch the int bpl accumulator at line 211, which is the subject of this advisory. The bpl accumulator was also not addressed by any of the 8 advisories in the 2026-04-05 v3.4.9 release batch. This finding is structurally identical to CVE-2026-34588 (PIZ wcountnx overflow in internalpiz.c) and should be remediated with the same pattern. The CVE-2026-34588 fix did not touch internalht.cpp. Version 3.4.10 contains a remediation that addresses the vulnerability in internalht.cpp.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.1.0 to before 3.2.7, 3.3.9, and 3.4.9, internalexrundopiz() advances the working wavelet pointer with signed 32-bit arithmetic. Because nx, ny, and wcount are int, a crafted EXR file can make this product overflow and wrap. The next channel then decodes from an incorrect address. The wavelet decode path operates in place, so this yields both out-of-bounds reads and out-of-bounds writes. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, the DWA lossy decoder constructs temporary per-component block pointers using signed 32-bit arithmetic. For a large enough width, the calculation overflows and later decoder stores operate on a wrapped pointer outside the allocated rowBlock backing store. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, a misaligned memory write vulnerability exists in LossyDctDecoderexecute() in src/lib/OpenEXRCore/internaldwadecoder.h:749. When decoding a DWA or DWAB-compressed EXR file containing a FLOAT-type channel, the decoder performs an in-place HALF→FLOAT conversion by casting an unaligned uint8t row pointer to float and writing through it. Because the row buffer may not be 4-byte aligned, this constitutes undefined behavior under the C standard and crashes immediately on architectures that enforce alignment (ARM, RISC-V, etc.). On x86 it is silently tolerated at runtime but remains exploitable via compiler optimizations that assume aligned access. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.

Summary

The DWA lossy decoder constructs temporary per-component block pointers using signed 32-bit arithmetic. For a large enough width, the calculation overflows and later decoder stores operate on a wrapped pointer outside the allocated rowBlock backing store.

This bug is reachable from the public decoder path and can be reproduced through the shipped exrcheck tool with a crafted scanline DWAA file. The confirmed dynamic symptom is a write-side crash in the lossy DCT execution path.

Tested on commit: 7820b7e1b93405ba1d551c43a945018226b75bc5

Root Cause and Data Flow

The vulnerable pointer construction lives in src/lib/OpenEXRCore/internaldwadecoder.h:

c for (int comp = 1; comp < numComp; ++comp) rowBlock[comp] = rowBlock[comp - 1] + numBlocksX 64;

The expression numBlocksX 64 is computed as signed int. Once numBlocksX is large enough, the multiplication wraps, and rowBlock[comp] points backward rather than forward into the temporary decode buffer.

Later, LossyDctDecoderexecute() uses those derived pointers for real loads and stores during the block shuffle and reconstruction process. At that point the decoder is no longer operating within the bounds of the allocation created for rowBlockHandle.

The public control flow is the standard one:

c InputFile / ScanLineInputFile public read -> exrdecodingrun(...) -> exruncompresschunk(...) -> internalexrundodwaa(...) -> DwaCompressoruncompress(...) -> LossyDctDecoderexecute(...)

UBSan gives a clean root-cause diagnosis on the overflowing multiply, while ASAN shows the later memory error in the write-side decode path.

Reproduction

dwascanlineexrcheck.zip

Build with exrcheck with ASAN and run:

❯ ./build-asan/bin/exrcheck /tmp/dwascanlineexrcheck.exr file /tmp/dwascanlineexrcheck.exr /home/pop/sec/openexr/src/lib/OpenEXRCore/internaldwadecoder.h:331:58: runtime error: signed integer overflow: 33554432 64 cannot be represented in type 'int' AddressSanitizer:DEADLYSIGNAL ================================================================= ==1684058==ERROR: AddressSanitizer: SEGV on unknown address 0x758f8e5f0800 (pc 0x75979e850336 bp 0x7ffe8f1d3420 sp 0x7ffe8f1d30f0 T0) ==1684058==The signal is caused by a WRITE memory access. #0 0x75979e850336 in LossyDctDecoderexecute /home/pop/sec/openexr/src/lib/OpenEXRCore/internaldwadecoder.h:524 #1 0x75979e879592 in DwaCompressoruncompress /home/pop/sec/openexr/src/lib/OpenEXRCore/internaldwacompressor.h:1210 #2 0x75979e879592 in internalexrundodwaa /home/pop/sec/openexr/src/lib/OpenEXRCore/internaldwa.c:231 #3 0x75979e95f878 in exruncompresschunk /home/pop/sec/openexr/src/lib/OpenEXRCore/compression.c:542 #4 0x75979e9659a8 in exrdecodingrun /home/pop/sec/openexr/src/lib/OpenEXRCore/decoding.c:580 #5 0x7597a0271add in rundecode /home/pop/sec/openexr/src/lib/OpenEXR/ImfScanLineInputFile.cpp:586 #6 0x7597a0283dc4 in Imf40::ScanLineInputFile::Data::readPixels(Imf40::FrameBuffer const&, int, int) /home/pop/sec/openexr/src/lib/OpenEXR/ImfScanLineInputFile.cpp:500 #7 0x7597a00c6a81 in Imf40::InputFile::Data::readPixels(int, int) /home/pop/sec/openexr/src/lib/OpenEXR/ImfInputFile.cpp:458 #8 0x7597a13fe2dc in readScanline<Imf40::InputPart> /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:239 #9 0x7597a1405b04 in readMultiPart /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:905 #10 0x7597a14126fd in runChecks<char const> /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:1171 #11 0x7597a14146b9 in Imf40::checkOpenEXRFile(char const, bool, bool, bool) /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:1835 #12 0x61ba9582b8f8 in exrCheck(char const, bool, bool, bool, bool) /home/pop/sec/openexr/src/bin/exrcheck/main.cpp:96 #13 0x61ba958282b1 in main /home/pop/sec/openexr/src/bin/exrcheck/main.cpp:164 #14 0x75979d62a1c9 in libcstartcallmain ../sysdeps/nptl/libcstartcallmain.h:58 #15 0x75979d62a28a in libcstartmainimpl ../csu/libc-start.c:360 #16 0x61ba95829844 in start (/home/pop/sec/openexr/build-asan/bin/exrcheck+0xe844) (BuildId: 087c972343a5372940c42c0a2e7bce4a84288aec)

AddressSanitizer can not provide additional info. SUMMARY: AddressSanitizer: SEGV /home/pop/sec/openexr/src/lib/OpenEXRCore/internaldwadecoder.h:524 in LossyDctDecoderexecute ==1684058==ABORTING ------- Found by: Quang Luong of Calif.io

Summary

internalexrundopiz() advances the working wavelet pointer with signed 32-bit arithmetic:

c wavbuf += nx ny wcount;

Because nx, ny, and wcount are int, a crafted EXR file can make this product overflow and wrap. The next channel then decodes from an incorrect address. The wavelet decode path operates in place, so this yields both out-of-bounds reads and out-of-bounds writes.

Tested on commit 7820b7e1b93405ba1d551c43a945018226b75bc5

Technical Details

The vulnerable decode path is:

1. internalexrundopiz() sets wavbuf = decode->scratchbuffer1. 2. For each channel, it calls wav2Ddecode (wavbuf + j, ...). 3. It then advances wavbuf with wavbuf += nx ny wcount.

The overflow happens in step 3. Once wavbuf is wrapped, the next channel's wavelet decode runs on the wrong address.

In the 14-bit wavelet path, wdec144() first reads:

- px - p10 - p01 - p11

and then writes back to the same locations:

- px = ... - p01 = ... - p10 = ... - p11 = ...

As a result, the bug is not just a crash-only invalid read. It is an out-of-bounds read/write condition.

Reproduction

pizscanlineredzone.zip

Build exrcheck with ASAN and run:

❯ ./build-asan/bin/exrcheck /tmp/pizscanlineredzone.exr file /tmp/pizscanlineredzone.exr /home/pop/sec/openexr/src/lib/OpenEXRCore/internalpiz.c:373:19: runtime error: signed integer overflow: 134217724 32 cannot be represented in type 'int' ================================================================= ==1711239==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7bedc3934700 at pc 0x7bf1f100f498 bp 0x7ffe032d8f00 sp 0x7ffe032d8ef0 READ of size 2 at 0x7bedc3934700 thread T0 #0 0x7bf1f100f497 in wdec144 /home/pop/sec/openexr/src/lib/OpenEXRCore/internalpiz.c:148 #1 0x7bf1f100f497 in wav2Ddecode /home/pop/sec/openexr/src/lib/OpenEXRCore/internalpiz.c:403 #2 0x7bf1f100f497 in internalexrundopiz /home/pop/sec/openexr/src/lib/OpenEXRCore/internalpiz.c:727 #3 0x7bf1f115b038 in exruncompresschunk /home/pop/sec/openexr/src/lib/OpenEXRCore/compression.c:546 #4 0x7bf1f1161168 in exrdecodingrun /home/pop/sec/openexr/src/lib/OpenEXRCore/decoding.c:580 #5 0x7bf1f2a71add in rundecode /home/pop/sec/openexr/src/lib/OpenEXR/ImfScanLineInputFile.cpp:586 #6 0x7bf1f2a83dc4 in Imf40::ScanLineInputFile::Data::readPixels(Imf40::FrameBuffer const&, int, int) /home/pop/sec/openexr/src/lib/OpenEXR/ImfScanLineInputFile.cpp:500 #7 0x7bf1f28c6a81 in Imf40::InputFile::Data::readPixels(int, int) /home/pop/sec/openexr/src/lib/OpenEXR/ImfInputFile.cpp:458 #8 0x7bf1f3bfe2dc in readScanline<Imf40::InputPart> /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:239 #9 0x7bf1f3c05b04 in readMultiPart /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:905 #10 0x7bf1f3c126fd in runChecks<char const> /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:1171 #11 0x7bf1f3c146b9 in Imf40::checkOpenEXRFile(char const, bool, bool, bool) /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:1835 #12 0x5d9675fce8f8 in exrCheck(char const, bool, bool, bool, bool) /home/pop/sec/openexr/src/bin/exrcheck/main.cpp:96 #13 0x5d9675fcb2b1 in main /home/pop/sec/openexr/src/bin/exrcheck/main.cpp:164 #14 0x7bf1efe2a1c9 in libcstartcallmain ../sysdeps/nptl/libcstartcallmain.h:58 #15 0x7bf1efe2a28a in libcstartmainimpl ../csu/libc-start.c:360 #16 0x5d9675fcc844 in start (/home/pop/sec/openexr/build-asan/bin/exrcheck+0xe844) (BuildId: 087c972343a5372940c42c0a2e7bce4a84288aec)

0x7bedc3934700 is located 256 bytes before 8590720784-byte region [0x7bedc3934800,0x7befc39f4710) allocated by thread T0 here: #0 0x7bf1f40fd9c7 in malloc ../../../../src/libsanitizer/asan/asanmalloclinux.cpp:69 #1 0x7bf1f115883e in internaldecodeallocbuffer /home/pop/sec/openexr/src/lib/OpenEXRCore/coding.c:256 #2 0x7bf1f100da97 in internalexrundopiz /home/pop/sec/openexr/src/lib/OpenEXRCore/internalpiz.c:643 #3 0x7bf1f115b038 in exruncompresschunk /home/pop/sec/openexr/src/lib/OpenEXRCore/compression.c:546 #4 0x7bf1f1161168 in exrdecodingrun /home/pop/sec/openexr/src/lib/OpenEXRCore/decoding.c:580 #5 0x7bf1f2a71add in rundecode /home/pop/sec/openexr/src/lib/OpenEXR/ImfScanLineInputFile.cpp:586 #6 0x7bf1f2a83dc4 in Imf40::ScanLineInputFile::Data::readPixels(Imf40::FrameBuffer const&, int, int) /home/pop/sec/openexr/src/lib/OpenEXR/ImfScanLineInputFile.cpp:500 #7 0x7bf1f28c6a81 in Imf40::InputFile::Data::readPixels(int, int) /home/pop/sec/openexr/src/lib/OpenEXR/ImfInputFile.cpp:458 #8 0x7bf1f3bfe2dc in readScanline<Imf40::InputPart> /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:239 #9 0x7bf1f3c05b04 in readMultiPart /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:905 #10 0x7bf1f3c126fd in runChecks<char const> /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:1171 #11 0x7bf1f3c146b9 in Imf40::checkOpenEXRFile(char const, bool, bool, bool) /home/pop/sec/openexr/src/lib/OpenEXRUtil/ImfCheckFile.cpp:1835 #12 0x5d9675fce8f8 in exrCheck(char const, bool, bool, bool, bool) /home/pop/sec/openexr/src/bin/exrcheck/main.cpp:96 #13 0x5d9675fcb2b1 in main /home/pop/sec/openexr/src/bin/exrcheck/main.cpp:164 #14 0x7bf1efe2a1c9 in libcstartcallmain ../sysdeps/nptl/libcstartcallmain.h:58 #15 0x7bf1efe2a28a in libcstartmainimpl ../csu/libc-start.c:360 #16 0x5d9675fcc844 in start (/home/pop/sec/openexr/build-asan/bin/exrcheck+0xe844) (BuildId: 087c972343a5372940c42c0a2e7bce4a84288aec)

SUMMARY: AddressSanitizer: heap-buffer-overflow /home/pop/sec/openexr/src/lib/OpenEXRCore/internalpiz.c:148 in wdec144 Shadow bytes around the buggy address: 0x7bedc3934480: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x7bedc3934500: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x7bedc3934580: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x7bedc3934600: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x7bedc3934680: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa =>0x7bedc3934700:[fa]fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x7bedc3934780: fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa fa 0x7bedc3934800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x7bedc3934880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x7bedc3934900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0x7bedc3934980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Shadow byte legend (one shadow byte represents 8 application bytes): Addressable: 00 Partially addressable: 01 02 03 04 05 06 07 Heap left redzone: fa Freed heap region: fd Stack left redzone: f1 Stack mid redzone: f2 Stack right redzone: f3 Stack after return: f5 Stack use after scope: f8 Global redzone: f9 Global init order: f6 Poisoned by user: f7 Container overflow: fc Array cookie: ac Intra object redzone: bb ASan internal: fe Left alloca redzone: ca Right alloca redzone: cb ==1711239==ABORTING

To prove this is both READ and WRITE, we can also memcheck against non-ASAN release build:

sh valgrind --tool=memcheck --leak-check=no --track-origins=no \ --error-limit=no --num-callers=20 \ ./build-relwithdebinfo/bin/exrcheck /tmp/pizscanlineredzone.exr

Observed result:

- Invalid read of size 2 at internalpiz.c:150 - Invalid write of size 2 at internalpiz.c:171

This confirms the bug is an OOB read/write, not only a read-first crash.

Redzone-Oriented File

- width: 67108862 - height: 32 - channel A: FLOAT, sampling 1 x 1 - channel B: HALF, sampling 33554431 x 16

This makes:

text width 32 2 = 4294967168

which wraps signed 32-bit arithmetic to -128.

That places the next wavbuf access just before the allocated buffer, producing a clean heap-overflow report.

Impact

A crafted EXR file can trigger out-of-bounds memory access during PIZ decompression. The primitive includes both invalid reads and invalid writes. Depending on allocator layout and surrounding memory, this could lead to process crash, memory corruption, or potentially stronger exploitation outcomes.

Recommended Fix

- compute channel span in 64-bit arithmetic - reject any overflow in nx ny wcount - validate cumulative per-channel decoded footprint against outsz before wavelet decode - fail decompression if channel-derived layout does not exactly fit the decompression buffer -------- Found by: Quang Luong of Calif.io

OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From 3.2.0 to before 3.2.7, 3.3.9, and 3.4.9, a signed integer overflow exists in undopxr24impl() in src/lib/OpenEXRCore/internalpxr24.c at line 377. The expression (uint64t)(w 3) computes w 3 as a signed 32-bit integer before casting to uint64t. When w is large, this multiplication constitutes undefined behavior under the C standard. On tested builds (clang/gcc without sanitizers), two's-complement wraparound commonly occurs, and for specific values of w the wrapped result is a small positive integer, which may allow the subsequent bounds check to pass incorrectly. If the check is bypassed, the decoding loop proceeds to write pixel data through dout, potentially extending far beyond the allocated output buffer. This vulnerability is fixed in 3.2.7, 3.3.9, and 3.4.9.