Where
-Infinity
0
Severity
6.4
AV:P/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H

A vulnerability in the secure boot implementation of Cisco Secure Firewalls 3100 Series that are running Cisco Adaptive Security Appliance (ASA) Software or Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated attacker with physical access to the device to bypass the secure boot functionality. This vulnerability is due to a logic error in the boot process. An attacker could exploit this vulnerability by injecting malicious code into a specific memory location during the boot process of an affected device. A successful exploit could allow the attacker to execute persistent code at boot time and break the chain of trust. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-fw3100-secure-boot-5M8mUh26 This advisory is part of the November 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: November 2022 Semiannual Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
7.4
AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N

A vulnerability in the handling of RSA keys on devices running Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to retrieve an RSA private key. This vulnerability is due to a logic error when the RSA key is stored in memory on a hardware platform that performs hardware-based cryptography. An attacker could exploit this vulnerability by using a Lenstra side-channel attack against the targeted device. A successful exploit could allow the attacker to retrieve the RSA private key. The following conditions may be observed on an affected device: Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-rsa-key-leak-Ms7UEfZz

First published (updated )
Severity
8.6
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

A vulnerability in the remote access SSL VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper validation of errors that are logged as a result of client connections that are made using remote access VPN. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to cause the affected device to restart, resulting in a DoS condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-dos-tL4uA4AA This advisory is part of the April 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2022 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
7.5
Input Validation
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H

A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to improper input validation when parsing HTTPS requests. An attacker could exploit this vulnerability by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asafdt-webvpn-dos-tzPSYern This advisory is part of the April 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2022 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
7.1
AV:N/AC:L/PR:L/UI:N/S:U/C:L/I:N/A:H

A vulnerability in the handler for HTTP authentication for resources accessed through the Clientless SSL VPN portal of Cisco Adaptive Security Appliance (ASA) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device or to obtain portions of process memory from an affected device. This vulnerability is due to insufficient bounds checking when parsing specific HTTP authentication messages. An attacker could exploit this vulnerability by sending malicious traffic to an affected device acting as a VPN Gateway. To send this malicious traffic, an attacker would need to control a web server that can be accessed through the Clientless SSL VPN portal. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition, or to retrieve bytes from the device process memory that may contain sensitive information. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ssl-vpn-heap-zLX3FdX This advisory is part of the April 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2022 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
7.4
AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:N

A vulnerability in an IPsec VPN library of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to read or modify data within an IPsec IKEv2 VPN tunnel. This vulnerability is due to an improper implementation of Galois/Counter Mode (GCM) ciphers. An attacker in a man-in-the-middle position could exploit this vulnerability by intercepting a sufficient number of encrypted messages across an affected IPsec IKEv2 VPN tunnel and then using cryptanalytic techniques to break the encryption. A successful exploit could allow the attacker to decrypt, read, modify, and re-encrypt data that is transmitted across an affected IPsec IKEv2 VPN tunnel. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-ipsec-mitm-CKnLr4 This advisory is part of the April 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2022 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

Remedy

<p>There is a workaround that addresses this vulnerability. To remove the attack vector for this vulnerability, reconfigure all existing IPsec IKEv2 proposals to use a non-GCM cipher.</p> <p>For example, if you have the following IPsec IKEv2 proposal configured:</p> <blockquote> <pre>firewall# <strong><span style="font-family: monospace;">show running-config crypto ipsec</span></strong> <br>crypto ipsec ikev2 ipsec-proposal AES-GCM<br> protocol esp encryption <strong><span style="font-family: monospace;">aes-gcm</span></strong><br> protocol esp integrity <strong><span style="font-family: monospace;">null</span></strong></pre> </blockquote> <p>Reconfigure that as follows:</p> <blockquote> <pre>firewall# configure terminal <br>firewall(config)# <strong><span style="font-family: monospace;">crypto ipsec ikev2 ipsec-proposal</span></strong> AES-GCM<br>firewall(config-ipsec-proposal)# <strong><span style="font-family: monospace;">protocol esp integrity</span></strong> sha-256 <br>WARNING: GCM\GMAC are authenticated encryption algorithms.esp integrity config is ignored<br>firewall(config-ipsec-proposal)# <strong><span style="font-family: monospace;">protocol esp encryption</span></strong> aes-256 <br>firewall# show running-config crypto ipsec <br>crypto ipsec ikev2 ipsec-proposal AES-GCM<br> protocol esp encryption aes-256<br> protocol esp integrity sha-256</pre> </blockquote> <p><strong>Note:</strong> GCM ciphers are inherently authenticated, thus the configured <strong>integrity</strong> algorithm is ignored for these ciphers and the <em>null</em> cipher is recommended. When changing to a non-GCM cipher, first configure a valid <strong>integrity</strong> algorithm as well.</p> <p>For all available options, see <a href="https://www.cisco.com/c/en/us/td/docs/security/asa/asa-cli-reference/I-R/asa-command-ref-I-R/pr-pz-commands.html#wp3024205846">Cisco ASA Series Command Reference</a>.</p> <p>For LAN-to-LAN IPsec IKEv2 VPN connections, match the configuration on the remote side accordingly to ensure that the VPN tunnels keep working.</p> <p>To completely close the attack vector, force all existing IPsec IKEv2 VPN connections to log off and then re-establish their session using the new ciphers as follows:</p> <blockquote> <pre>firewall# <strong><span style="font-family: monospace;">vpn-sessiondb logoff protocol ikev2</span></strong> <br>Do you want to logoff the VPN session(s)? [confirm] <br>INFO: Number of sessions with protocol "IKEv2" logged off : 0</pre> </blockquote> <p><strong>Note:</strong> Using this command will force all existing IPsec IKEv2 VPN tunnels to be torn down. This will cause intermittent packet loss across the affected VPN tunnels until those tunnels are re-established.</p> <p>While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.</p>
First published (updated )
Severity
8.8
AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

A vulnerability in the web services interface for remote access VPN features of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, but unprivileged, remote attacker to elevate privileges to level 15. This vulnerability is due to improper separation of authentication and authorization scopes. An attacker could exploit this vulnerability by sending crafted HTTPS messages to the web services interface of an affected device. A successful exploit could allow the attacker to gain privilege level 15 access to the web management interface of the device. This includes privilege level 15 access to the device using management tools like the Cisco Adaptive Security Device Manager (ASDM) or the Cisco Security Manager (CSM). Note: With Cisco FTD Software, the impact is lower than the CVSS score suggests because the affected web management interface allows for read access only. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-mgmt-privesc-BMFMUvye This advisory is part of the April 2022 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2022 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
5.8
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:L

A vulnerability in the implementation of the Datagram TLS (DTLS) protocol in Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause high CPU utilization, resulting in a denial of service (DoS) condition. This vulnerability is due to suboptimal processing that occurs when establishing a DTLS tunnel as part of an AnyConnect SSL VPN connection. An attacker could exploit this vulnerability by sending a steady stream of crafted DTLS traffic to an affected device. A successful exploit could allow the attacker to exhaust resources on the affected VPN headend device. This could cause existing DTLS tunnels to stop passing traffic and prevent new DTLS tunnels from establishing, resulting in a DoS condition. Note: When the attack traffic stops, the device recovers gracefully. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-vpndtls-dos-TunzLEV

First published (updated )
Severity
8.6
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

A vulnerability in the memory management of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to improper resource management when connection rates are high. An attacker could exploit this vulnerability by opening a significant number of connections on an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dos-Unk689XY This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
8.6
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

A vulnerability in the TCP Normalizer of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software operating in transparent mode could allow an unauthenticated, remote attacker to poison MAC address tables, resulting in a denial of service (DoS) vulnerability. This vulnerability is due to incorrect handling of certain TCP segments when the affected device is operating in transparent mode. An attacker could exploit this vulnerability by sending a crafted TCP segment through an affected device. A successful exploit could allow the attacker to poison the MAC address tables in adjacent devices, resulting in network disruption. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-dos-JxYWMJyL This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
8.6
Input Validation
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

Multiple vulnerabilities in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition. These vulnerabilities are due to improper input validation when parsing HTTPS requests. An attacker could exploit these vulnerabilities by sending a malicious HTTPS request to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asafdt-webvpn-dos-KSqJAKPA This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
5.3
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N

A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-snmpaccess-M6yOweq3 This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
8.6
Buffer Overflow
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

A vulnerability in SSL/TLS message handler for Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because incoming SSL/TLS packets are not properly processed. An attacker could exploit this vulnerability by sending a crafted SSL/TLS packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-dos-4ygzLKU9 This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
5.3
Use After Free
AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:N/A:H

A vulnerability in the Internet Key Exchange Version 2 (IKEv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. This vulnerability is due to improper control of a resource. An attacker with the ability to spoof a trusted IKEv2 site-to-site VPN peer and in possession of valid IKEv2 credentials for that peer could exploit this vulnerability by sending malformed, authenticated IKEv2 messages to an affected device. A successful exploit could allow the attacker to trigger a reload of the device. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-ikev2-dos-g4cmrr7C This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
5.3
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N

A vulnerability in the identity-based firewall (IDFW) rule processing feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass security protections. This vulnerability is due to improper handling of network requests by affected devices configured to use object group search. An attacker could exploit this vulnerability by sending a specially crafted network request to an affected device. A successful exploit could allow the attacker to bypass access control list (ACL) rules on the device, bypass security protections, and send network traffic to unauthorized hosts. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-rule-bypass-ejjOgQEY This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
8.6
Buffer Overflow
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

A vulnerability in the software-based SSL/TLS message handler of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL/TLS decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: Datagram TLS (DTLS) messages cannot be used to exploit this vulnerability. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-tls-decrypt-dos-BMxYjm8M This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
4.7
AV:N/AC:L/PR:N/UI:R/S:C/C:N/I:L/A:N

Multiple vulnerabilities in the Application Level Gateway (ALG) for the Network Address Translation (NAT) feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass the ALG and open unauthorized connections with a host located behind the ALG. For more information about these vulnerabilities, see the Details section of this advisory. Note: These vulnerabilities have been publicly discussed as NAT Slipstreaming. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link: https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-natalg-bypass-cpKGqkng This advisory is part of the October 2021 release of the Cisco ASA, FTD, and FMC Security Advisory Bundled publication. For a complete list of the advisories and links to them, see Cisco Event Response: October 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
6.7
Command Injection, Input Validation
AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

A vulnerability in the upgrade process of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to inject commands that could be executed with root privileges on the underlying operating system (OS). This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by uploading a crafted upgrade package file to an affected device. A successful exploit could allow the attacker to inject commands that could be executed with root privileges on the underlying OS. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-cmdinj-TKyQfDcU

First published (updated )
Severity
6.7
OS Command Injection, Input Validation
AV:L/AC:L/PR:H/UI:N/S:U/C:H/I:H/A:H

A vulnerability in the CLI of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system (OS) of an affected device. The vulnerability is due to insufficient input validation of commands that are supplied by the user. An attacker could exploit this vulnerability by authenticating to a device and submitting crafted input for specific commands. A successful exploit could allow the attacker to execute commands on the underlying OS with root privileges. To exploit this vulnerability, an attacker must have valid administrator-level credentials. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-cmd-inj-SELprvG

First published (updated )
Severity
8.6
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

A vulnerability in the SIP inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a crash and reload of an affected device, resulting in a denial of service (DoS) condition.The vulnerability is due to a crash that occurs during a hash lookup for a SIP pinhole connection. An attacker could exploit this vulnerability by sending crafted SIP traffic through an affected device. A successful exploit could allow the attacker to cause a crash and reload of the affected device. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-sipdos-GGwmMerC This advisory is part of the April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
8.6
Input Validation
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

Multiple vulnerabilities in Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. These vulnerabilities are due to lack of proper input validation of the HTTPS request. An attacker could exploit these vulnerabilities by sending a crafted HTTPS request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. Note: This vulnerability affects only specific AnyConnect and WebVPN configurations. For more information, see the Vulnerable Products section. Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-vpn-dos-fpBcpEcD This advisory is part of the April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
8.5
Buffer Overflow
AV:N/AC:L/PR:L/UI:N/S:C/C:L/I:N/A:H

A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a buffer overflow on an affected system. The vulnerability is due to insufficient boundary checks for specific data that is provided to the web services interface of an affected system. An attacker could exploit this vulnerability by sending a malicious HTTP request. A successful exploit could allow the attacker to cause a buffer overflow condition on the affected system, which could disclose data fragments or cause the device to reload, resulting in a denial of service (DoS) condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-memc-dos-fncTyYKG This advisory is part of the April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication. For a complete list of the advisories and links to them, see Cisco Event Response: April 2021 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
4.7
CRLF Injection
AV:N/AC:L/PR:N/UI:R/S:C/C:N/I:L/A:N

Update from October 22nd, 2020: Cisco has become aware of a new Cisco Adaptive Security Appliance vulnerability that could affect the fixed releases recommended for code trains 9.13 and 9.14 in the Fixed Software section of this advisory. See the Cisco Adaptive Security Appliance Software SSL/TLS Denial of Service Vulnerability for additional information. A vulnerability in the Clientless SSL VPN (WebVPN) of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to inject arbitrary HTTP headers in the responses of the affected system. The vulnerability is due to improper input sanitization. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to conduct a CRLF injection attack, adding arbitrary HTTP headers in the responses of the system and redirecting the user to arbitrary websites. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-crlf-inj-BX9uRwSn

First published (updated )
Severity
5.3
AV:N/AC:L/PR:N/UI:N/S:U/C:L/I:N/A:N

A vulnerability in the TLS handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 1000 Series firewalls could allow an unauthenticated, remote attacker to gain access to sensitive information. The vulnerability is due to improper implementation of countermeasures against the Bleichenbacher attack for cipher suites that rely on RSA for key exchange. An attacker could exploit this vulnerability by sending crafted TLS messages to the device, which would act as an oracle and allow the attacker to carry out a chosen-ciphertext attack. A successful exploit could allow the attacker to perform cryptanalytic operations that may allow decryption of previously captured TLS sessions to the affected device. To exploit this vulnerability, an attacker must be able to perform both of the following actions: Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-tls-bb-2g9uWkP

First published (updated )
Severity
5.3
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:L/A:N

Update from October 22nd, 2020: Cisco has become aware of a new Cisco Adaptive Security Appliance vulnerability that could affect the fixed releases recommended for code trains 9.13 and 9.14 in the Fixed Software section of this advisory. See the Cisco Adaptive Security Appliance Software SSL/TLS Denial of Service Vulnerability for additional information. A vulnerability in the web services interface of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured access rule and access parts of the WebVPN portal that are supposed to be blocked. The vulnerability is due to insufficient validation of URLs when portal access rules are configured. An attacker could exploit this vulnerability by accessing certain URLs on the affected device. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-rule-bypass-P73ABNWQ

First published (updated )
Severity
8.6
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

Update from October 22nd, 2020: Cisco has become aware of a new Cisco Adaptive Security Appliance vulnerability that could affect the fixed releases recommended for code trains 9.13 and 9.14 in the Fixed Software section of this advisory. See the Cisco Adaptive Security Appliance Software SSL/TLS Denial of Service Vulnerability for additional information. A vulnerability in the SSL/TLS session handler of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory leak when closing SSL/TLS connections in a specific state. An attacker could exploit this vulnerability by establishing several SSL/TLS sessions and ensuring they are closed under certain conditions. A successful exploit could allow the attacker to exhaust memory resources in the affected device, which would prevent it from processing new SSL/TLS connections, resulting in a DoS. Manual intervention is required to recover an affected device. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-ftd-tcp-dos-N3DMnU4T This advisory is part of the October 2020 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication, which includes 17 Cisco Security Advisories that describe 17 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: October 2020 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
8.6
Input Validation
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

Update from October 22nd, 2020: Cisco has become aware of a new Cisco Adaptive Security Appliance vulnerability that could affect the fixed releases recommended for code trains 9.13 and 9.14 in the Fixed Software section of this advisory. See the Cisco Adaptive Security Appliance Software SSL/TLS Denial of Service Vulnerability for additional information. A vulnerability in the OSPF Version 2 (OSPFv2) implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause an affected device to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to incomplete input validation when the affected software processes certain OSPFv2 packets with Link-Local Signaling (LLS) data. An attacker could exploit this vulnerability by sending a malformed OSPFv2 packet to an affected device. A successful exploit could allow the attacker to cause an affected device to reload, resulting in a DoS condition. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-ospflls-37Xy2q6r This advisory is part of the October 2020 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication, which includes 17 Cisco Security Advisories that describe 17 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: October 2020 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

First published (updated )
Severity
6.8
AV:N/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H

Update from October 22nd, 2020: Cisco has become aware of a new Cisco Adaptive Security Appliance vulnerability that could affect the fixed releases recommended for code trains 9.13 and 9.14 in the Fixed Software section of this advisory. See the Cisco Adaptive Security Appliance Software SSL/TLS Denial of Service Vulnerability for additional information. A vulnerability in the SIP inspection process of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a crash and reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a watchdog timeout and crash during the cleanup of threads that are associated with a SIP connection that is being deleted from the connection list. An attacker could exploit this vulnerability by sending a high rate of crafted SIP traffic through an affected device. A successful exploit could allow the attacker to cause a watchdog timeout and crash, resulting in a crash and reload of the affected device. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-sipdos-3DGvdjvg

First published (updated )
Severity
6.1
XSS
AV:N/AC:L/PR:N/UI:R/S:C/C:L/I:L/A:N

Update from October 22nd, 2020: Cisco has become aware of a new Cisco Adaptive Security Appliance vulnerability that could affect the fixed releases recommended for code trains 9.13 and 9.14 in the Fixed Software section of this advisory. See the Cisco Adaptive Security Appliance Software SSL/TLS Denial of Service Vulnerability for additional information. A vulnerability in the web-based management interface of Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to conduct a cross-site scripting (XSS) attack against a user of the interface. This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by persuading a user of the interface to click a crafted link. A successful exploit could allow the attacker to execute arbitrary script code in the context of the interface or access sensitive, browser-based information. Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asa-rxss-L54Htxp

First published (updated )
Severity
8.6
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

Update from October 22nd, 2020: Cisco has become aware of a new Cisco Adaptive Security Appliance vulnerability that could affect the fixed releases recommended for code trains 9.13 and 9.14 in the Fixed Software section of this advisory. See the Cisco Adaptive Security Appliance Software SSL/TLS Denial of Service Vulnerability for additional information. A vulnerability in the TCP packet processing of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to a memory exhaustion condition. An attacker could exploit this vulnerability by sending a high rate of crafted TCP traffic through an affected device. A successful exploit could allow the attacker to exhaust device resources, resulting in a DoS condition for traffic transiting the affected device. Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability. This advisory is available at the following link:https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-dos-QFcNEPfx This advisory is part of the October 2020 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication, which includes 17 Cisco Security Advisories that describe 17 vulnerabilities. For a complete list of the advisories and links to them, see Cisco Event Response: October 2020 Cisco ASA, FMC, and FTD Software Security Advisory Bundled Publication.

Remedy

<p>As a workaround, an administrator may implement the <strong>fragment reassembly full [interface-name]</strong> command. There may be a performance impact when implementing this command.</p>
First published (updated )

Contact

SecAlerts Pty Ltd.
132 Wickham Terrace
Fortitude Valley,
QLD 4006, Australia
info@secalerts.co
By using SecAlerts services, you agree to our services end-user license agreement. This website is safeguarded by reCAPTCHA and governed by the Google Privacy Policy and Terms of Service. All names, logos, and brands of products are owned by their respective owners, and any usage of these names, logos, and brands for identification purposes only does not imply endorsement. If you possess any content that requires removal, please get in touch with us.
© 2026 SecAlerts Pty Ltd.
ABN: 70 645 966 203, ACN: 645 966 203