Where
AND
AND
-Infinity
0
Severity
9.2
EPSS
10.86%
Buffer Overflow
AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H

Last updated 6 June 2026

1 / 5
Source: Ubuntu
First published (updated )
Severity
9.8
Buffer Overflow
AV:N/AC:L/PR:N/UI:N/S:U/C:N/I:H/A:H

Last updated 26 June 2026

1 / 2
Source: Ubuntu
First published (updated )
Severity
9.8
EPSS
76.94%
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

GNU InetUtils contains an argument injection vulnerability in telnetd that could allow for remote authentication bypass via a "-f root" value for the USER environment variable.

1 / 2
Source: CISA
First published (updated )
Severity
9.8
Buffer Overflow
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

net-snmp is a SNMP application library, tools and daemon. Prior to versions 5.9.5 and 5.10.pre2, a specially crafted packet to an net-snmp snmptrapd daemon can cause a buffer overflow and the daemon to crash. This issue has been patched in versions 5.9.5 and 5.10.pre2.

1 / 3
Source: MITRE
First published (updated )
Severity
9.8
Incorrect Type Cast
AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

In the Linux kernel, the following vulnerability has been resolved:

libceph: fix invalid accesses to cephconnectionv1info

There is a place where generic code in messenger.c is reading and another place where it is writing to con->v1 union member without checking that the union member is active (i.e. msgr1 is in use).

On 64-bit systems, con->v1.authretry overlaps with con->v2.outiter, so such a read is almost guaranteed to return a bogus value instead of 0 when msgr2 is in use. This ends up being fairly benign because the side effect is just the invalidation of the authorizer and successive fetching of new tickets.

con->v1.connectseq overlaps with con->v2.connbufs and the fact that it's being written to can cause more serious consequences, but luckily it's not something that happens often.

1 / 3
Source: MITRE
First published (updated )
Severity
9.8
EPSS
0.03%
AV:N/AC:H/PR:N/UI:N/S:U/C:L/I:L/A:L

Issue summary: An application trying to decrypt CMS messages encrypted using password based encryption can trigger an out-of-bounds read and write.

Impact summary: This out-of-bounds read may trigger a crash which leads to Denial of Service for an application. The out-of-bounds write can cause a memory corruption which can have various consequences including a Denial of Service or Execution of attacker-supplied code.

Although the consequences of a successful exploit of this vulnerability could be severe, the probability that the attacker would be able to perform it is low. Besides, password based (PWRI) encryption support in CMS messages is very rarely used. For that reason the issue was assessed as Moderate severity according to our Security Policy.

The FIPS modules in 3.5, 3.4, 3.3, 3.2, 3.1 and 3.0 are not affected by this issue, as the CMS implementation is outside the OpenSSL FIPS module boundary.

1 / 5
Source: IBM
First published (updated )
Severity
9.8
Use After Free
AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

In the Linux kernel, the following vulnerability has been resolved:

tls: fix handling of zero-length records on the rxlist

Each recvmsg() call must process either - only contiguous DATA records (any number of them) - one non-DATA record

If the next record has different type than what has already been processed we break out of the main processing loop. If the record has already been decrypted (which may be the case for TLS 1.3 where we don't know type until decryption) we queue the pending record to the rxlist. Next recvmsg() will pick it up from there.

Queuing the skb to rxlist after zero-copy decrypt is not possible, since in that case we decrypted directly to the user space buffer, and we don't have an skb to queue (darg.skb points to the ciphertext skb for access to metadata like length).

Only data records are allowed zero-copy, and we break the processing loop after each non-data record. So we should never zero-copy and then find out that the record type has changed. The corner case we missed is when the initial record comes from rxlist, and it's zero length.

1 / 4
Source: Red Hat
First published (updated )
Severity
9.2
Use After Free
AV:N/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:H

In the Linux kernel, the following vulnerability has been resolved:

1 / 6
Source: Launchpad
First published (updated )
Severity
9.8
Use After Free
AV:L/AC:H/PR:L/UI:N/S:U/C:N/I:H/A:H

In the Linux kernel, the following vulnerability has been resolved:

drbd: add missing krefget in handlewriteconflicts

With two-primaries enabled, DRBD tries to detect "concurrent" writes and handle write conflicts, so that even if you write to the same sector simultaneously on both nodes, they end up with the identical data once the writes are completed.

In handling "superseeded" writes, we forgot a krefget, resulting in a premature drbddestroydevice and use after free, and further to kernel crashes with symptoms.

Relevance: No one should use DRBD as a random data generator, and apparently all users of "two-primaries" handle concurrent writes correctly on layer up. That is cluster file systems use some distributed lock manager, and live migration in virtualization environments stops writes on one node before starting writes on the other node.

Which means that other than for "test cases", this code path is never taken in real life.

FYI, in DRBD 9, things are handled differently nowadays. We still detect "write conflicts", but no longer try to be smart about them. We decided to disconnect hard instead: upper layers must not submit concurrent writes. If they do, that's their fault.

1 / 3
Source: MITRE
First published (updated )
Severity
9.8
Race Condition
AV:N/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H

In the Linux kernel, the following vulnerability has been resolved:

ksmbd: fix PreauhHashValue race condition

If client send multiple session setup requests to ksmbd, PreauhHashValue race condition could happen. There is no need to free sess->PreauhHashValue at session setup phase. It can be freed together with session at connection termination phase.

1 / 3
Source: NVD
First published (updated )
Severity
9.8
Use After Free, Race Condition
AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:U

In the Linux kernel, the following vulnerability has been resolved:

smb: client: fix use-after-free in cifsoplockbreak

A race condition can occur in cifsoplockbreak() leading to a use-after-free of the cinode structure when unmounting:

cifsoplockbreak() cifsFileInfoput(cfile) cifsFileInfoputfinal() cifssbdeactive() [last ref, start releasing sb] killsb() killanonsuper() genericshutdownsuper() evictinodes() disposelist() evict() destroyinode() callrcu(&inode->ircu, icallback) spinlock(&cinode->openfilelock) <- OK [later] icallback() cifsfreeinode() kmemcachefree(cinode) spinunlock(&cinode->openfilelock) <- UAF cifsdoneoplockbreak(cinode) <- UAF

The issue occurs when umount has already released its reference to the superblock. When cifsFileInfoput() calls cifssbdeactive(), this releases the last reference, triggering the immediate cleanup of all inodes under RCU. However, cifsoplockbreak() continues to access the cinode after this point, resulting in use-after-free.

Fix this by holding an extra reference to the superblock during the entire oplock break operation. This ensures that the superblock and its inodes remain valid until the oplock break completes.

1 / 4
Source: Red Hat
First published (updated )
Severity
9.8
Use After Free, Null Pointer Dereference
AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

In the Linux kernel, the following vulnerability has been resolved:

smb: client: fix use-after-free in cryptmessage when using async crypto

The CVE-2024-50047 fix removed asynchronous crypto handling from cryptmessage(), assuming all crypto operations are synchronous. However, when hardware crypto accelerators are used, this can cause use-after-free crashes:

cryptmessage() // Allocate the creq buffer containing the req creq = smb2getaeadreq(..., &req);

// Async encryption returns -EINPROGRESS immediately rc = enc ? cryptoaeadencrypt(req) : cryptoaeaddecrypt(req);

// Free creq while async operation is still in progress kvfreesensitive(creq, ...);

Hardware crypto modules often implement async AEAD operations for performance. When cryptoaeadencrypt/decrypt() returns -EINPROGRESS, the operation completes asynchronously. Without cryptowaitreq(), the function immediately frees the request buffer, leading to crashes when the driver later accesses the freed memory.

This results in a use-after-free condition when the hardware crypto driver later accesses the freed request structure, leading to kernel crashes with NULL pointer dereferences.

The issue occurs because cryptoallocaead() with mask=0 doesn't guarantee synchronous operation. Even without CRYPTOALGASYNC in the mask, async implementations can be selected.

Fix by restoring the async crypto handling: - DECLARECRYPTOWAIT(wait) for completion tracking - aeadrequestsetcallback() for async completion notification - cryptowaitreq() to wait for operation completion

This ensures the request buffer isn't freed until the crypto operation completes, whether synchronous or asynchronous, while preserving the CVE-2024-50047 fix.

1 / 4
Source: NVD
First published (updated )
Severity
9.8
AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H/E:U

bnxten: Set DMA unmap len correctly for XDPREDIRECT

1 / 4
Source: Microsoft
First published (updated )
Severity
9.1
Race Condition
AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

btrfs: fix a race between renames and directory logging

1 / 4
Source: Microsoft
First published (updated )
Severity
9.3
AV:L/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H

An attacker can leverage sudo's -R (--chroot) option to run arbitrary commands as root, even if they are not listed in the sudoers file. Sudo versions 1.9.14 to 1.9.17 inclusive are affected.

1 / 4
Source: Red Hat
First published (updated )
Severity
10
EPSS
73.08%
AV:N/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H

Roundcube Webmail before 1.5.10 and 1.6.x before 1.6.11 allows remote code execution by authenticated users because the from parameter in a URL is not validated in program/actions/settings/upload.php, leading to PHP Object Deserialization.

1 / 3
Source: GitHub
First published (updated )
Severity
9.8
AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H

Password can be used past expiry in PgBouncer due to authquery not taking into account Postgres its VALID UNTIL value, which allows an attacker to log in with an already expired password

1 / 2
Source: MITRE
First published (updated )
Severity
10
EPSS
3.62%
AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H

Erlang Erlang/OTP SSH server contains a missing authentication for critical function vulnerability. This could allow an attacker to execute arbitrary commands without valid credentials, potentially leading to unauthenticated remote code execution (RCE). By exploiting a flaw in how SSH protocol messages are handled, a malicious actor could gain unauthorized access to affected systems. This vulnerability could affect various products that implement Erlang/OTP SSH server, including—but not limited to—Cisco, NetApp, and SUSE.

1 / 5
Source: CISA
First published (updated )
Severity
10
EPSS
0.04%
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:L/A:L

Apache Tomcat contains a path equivalence vulnerability that allows a remote attacker to execute code, disclose information, or inject malicious content via a partial PUT request. This vulnerability can be chained with CVE‑2026‑34486.

1 / 5
Source: CISA
First published (updated )
Input Validation, Null Pointer Dereference, Use After Free, Buffer Overflow, Integer Overflow
AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H

Accessibility. An authorization issue was addressed with improved state management.

1 / 67
Source: Apple
First published (updated )
Severity
9.9
AV:L/AC:L/PR:N/UI:R/S:C/C:H/I:H/A:H

An attacker can bypass the sandboxing of Nasal scripts and arbitrarily write to any file path that the user has permission to modify at the operating-system level.

First published (updated )
Severity
9.8
Use After Free
AV:L/AC:H/PR:L/UI:N/S:U/C:H/I:H/A:H

Last updated 20 March 2025

1 / 4
Source: Ubuntu
First published (updated )
Severity
9.8
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Unchecked Error Condition vulnerability in Apache Tomcat. If Tomcat is configured to use a custom Jakarta Authentication (formerly JASPIC) ServerAuthContext component which may throw an exception during the authentication process without explicitly setting an HTTP status to indicate failure, the authentication may not fail, allowing the user to bypass the authentication process. There are no known Jakarta Authentication components that behave in this way.

This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.0-M26, from 10.1.0-M1 through 10.1.30, from 9.0.0-M1 through 9.0.95.

The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other EOL versions may also be affected.

Users are recommended to upgrade to version 11.0.0, 10.1.31 or 9.0.96, which fix the issue.

1 / 6
Source: MITRE
First published (updated )
Severity
9.8
EPSS
16.18%
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

Icinga is a monitoring system which checks the availability of network resources, notifies users of outages, and generates performance data for reporting. The TLS certificate validation in all Icinga 2 versions starting from 2.4.0 was flawed, allowing an attacker to impersonate both trusted cluster nodes as well as any API users that use TLS client certificates for authentication (ApiUser objects with the clientcn attribute set). This vulnerability has been fixed in v2.14.3, v2.13.10, v2.12.11, and v2.11.12.

First published (updated )
Severity
9.8
Buffer Overflow
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

gio/gsocks4aproxy.c in GNOME GLib before 2.82.1 has an off-by-one error and resultant buffer overflow because SOCKS4CONNMSGLEN is not sufficient for a trailing '\0' character.

1 / 3
Source: Debian
First published (updated )
Severity
9.1
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:H

In the Linux kernel, the following vulnerability has been resolved:

netfilter: nfrejectipv6: fix nfrejectip6tcphdrput()

syzbot reported that nfrejectip6tcphdrput() was possibly sending garbage on the four reserved tcp bits (th->res1)

Use skbputzero() to clear the whole TCP header, as done in nfrejectiptcphdrput()

BUG: KMSAN: uninit-value in nfrejectip6tcphdrput+0x688/0x6c0 net/ipv6/netfilter/nfrejectipv6.c:255 nfrejectip6tcphdrput+0x688/0x6c0 net/ipv6/netfilter/nfrejectipv6.c:255 nfsendreset6+0xd84/0x15b0 net/ipv6/netfilter/nfrejectipv6.c:344 nftrejectineteval+0x3c1/0x880 net/netfilter/nftrejectinet.c:48 exprcallopseval net/netfilter/nftablescore.c:240 [inline] nftdochain+0x438/0x22a0 net/netfilter/nftablescore.c:288 nftdochaininet+0x41a/0x4f0 net/netfilter/nftchainfilter.c:161 nfhookentryhookfn include/linux/netfilter.h:154 [inline] nfhookslow+0xf4/0x400 net/netfilter/core.c:626 nfhook include/linux/netfilter.h:269 [inline] NFHOOK include/linux/netfilter.h:312 [inline] ipv6rcv+0x29b/0x390 net/ipv6/ip6input.c:310 netifreceiveskbonecore net/core/dev.c:5661 [inline] netifreceiveskb+0x1da/0xa00 net/core/dev.c:5775 processbacklog+0x4ad/0xa50 net/core/dev.c:6108 napipoll+0xe7/0x980 net/core/dev.c:6772 napipoll net/core/dev.c:6841 [inline] netrxaction+0xa5a/0x19b0 net/core/dev.c:6963 handlesoftirqs+0x1ce/0x800 kernel/softirq.c:554 dosoftirq+0x14/0x1a kernel/softirq.c:588 dosoftirq+0x9a/0x100 kernel/softirq.c:455 localbhenableip+0x9f/0xb0 kernel/softirq.c:382 localbhenable include/linux/bottomhalf.h:33 [inline] rcureadunlockbh include/linux/rcupdate.h:908 [inline] devqueuexmit+0x2692/0x5610 net/core/dev.c:4450 devqueuexmit include/linux/netdevice.h:3105 [inline] neighresolveoutput+0x9ca/0xae0 net/core/neighbour.c:1565 neighoutput include/net/neighbour.h:542 [inline] ip6finishoutput2+0x2347/0x2ba0 net/ipv6/ip6output.c:141 ip6finishoutput net/ipv6/ip6output.c:215 [inline] ip6finishoutput+0xbb8/0x14b0 net/ipv6/ip6output.c:226 NFHOOKCOND include/linux/netfilter.h:303 [inline] ip6output+0x356/0x620 net/ipv6/ip6output.c:247 dstoutput include/net/dst.h:450 [inline] NFHOOK include/linux/netfilter.h:314 [inline] ip6xmit+0x1ba6/0x25d0 net/ipv6/ip6output.c:366 inet6cskxmit+0x442/0x530 net/ipv6/inet6connectionsock.c:135 tcptransmitskb+0x3b07/0x4880 net/ipv4/tcpoutput.c:1466 tcptransmitskb net/ipv4/tcpoutput.c:1484 [inline] tcpconnect+0x35b6/0x7130 net/ipv4/tcpoutput.c:4143 tcpv6connect+0x1bcc/0x1e40 net/ipv6/tcpipv6.c:333 inetstreamconnect+0x2ef/0x1730 net/ipv4/afinet.c:679 inetstreamconnect+0x6a/0xd0 net/ipv4/afinet.c:750 sysconnectfile net/socket.c:2061 [inline] sysconnect+0x606/0x690 net/socket.c:2078 dosysconnect net/socket.c:2088 [inline] sesysconnect net/socket.c:2085 [inline] x64sysconnect+0x91/0xe0 net/socket.c:2085 x64syscall+0x27a5/0x3ba0 arch/x86/include/generated/asm/syscalls64.h:43 dosyscallx64 arch/x86/entry/common.c:52 [inline] dosyscall64+0xcd/0x1e0 arch/x86/entry/common.c:83 entrySYSCALL64afterhwframe+0x77/0x7f

Uninit was stored to memory at: nfrejectip6tcphdrput+0x60c/0x6c0 net/ipv6/netfilter/nfrejectipv6.c:249 nfsendreset6+0xd84/0x15b0 net/ipv6/netfilter/nfrejectipv6.c:344 nftrejectineteval+0x3c1/0x880 net/netfilter/nftrejectinet.c:48 exprcallopseval net/netfilter/nftablescore.c:240 [inline] nftdochain+0x438/0x22a0 net/netfilter/nftablescore.c:288 nftdochaininet+0x41a/0x4f0 net/netfilter/nftchainfilter.c:161 nfhookentryhookfn include/linux/netfilter.h:154 [inline] nfhookslow+0xf4/0x400 net/netfilter/core.c:626 nfhook include/linux/netfilter.h:269 [inline] NFHOOK include/linux/netfilter.h:312 [inline] ipv6rcv+0x29b/0x390 net/ipv6/ip6input.c:310 netifreceiveskbonecore ---truncated---

1 / 5
Source: NVD
First published (updated )
Severity
9.8
EPSS
0.36%
Use After Free
AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

An attacker was able to achieve code execution in the content process by exploiting a use-after-free in Animation timelines. We have had reports of this vulnerability being exploited in the wild.

1 / 5
Source: Mozilla
First published (updated )
Severity
9.8
Input Validation
AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:H/A:N

A remote attacker who has successfully installed or hijacked an exposed printer (via UPD or mDNS) and was able to return a malicious IPP attribute, the attacker may be able to exploit FoomaticRIPCommandLine to execute arbitrary commands. Due to a lack of sanitization in cfGetPrinterAttributes API and ppdCreatePPDFromIPP2, a vulnerable CUPS system will execute the foomatic-rip filter binary when a print job is sent to the printer.

1 / 6
Source: Red Hat
First published (updated )
Severity
9.2
Use After Free
AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H

In the Linux kernel, the following vulnerability has been resolved:

ipv6: fix possible UAF in ip6finishoutput2()

If skbexpandhead() returns NULL, skb has been freed and associated dst/idev could also have been freed.

We need to hold rcureadlock() to make sure the dst and associated idev are alive.

1 / 5
Source: NVD
First published (updated )
Severity
10
Race Condition
AV:N/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:N

Flatpak is a Linux application sandboxing and distribution framework. Prior to versions 1.14.0 and 1.15.10, a malicious or compromised Flatpak app using persistent directories could access and write files outside of what it would otherwise have access to, which is an attack on integrity and confidentiality.

When persistent=subdir is used in the application permissions (represented as --persist=subdir in the command-line interface), that means that an application which otherwise doesn't have access to the real user home directory will see an empty home directory with a writeable subdirectory subdir. Behind the scenes, this directory is actually a bind mount and the data is stored in the per-application directory as ~/.var/app/$APPID/subdir. This allows existing apps that are not aware of the per-application directory to still work as intended without general home directory access.

However, the application does have write access to the application directory ~/.var/app/$APPID where this directory is stored. If the source directory for the persistent/--persist option is replaced by a symlink, then the next time the application is started, the bind mount will follow the symlink and mount whatever it points to into the sandbox.

Partial protection against this vulnerability can be provided by patching Flatpak using the patches in commits ceec2ffc and 98f79773. However, this leaves a race condition that could be exploited by two instances of a malicious app running in parallel. Closing the race condition requires updating or patching the version of bubblewrap that is used by Flatpak to add the new --bind-fd option using the patch and then patching Flatpak to use it. If Flatpak has been configured at build-time with -Dsystembubblewrap=bwrap (1.15.x) or --with-system-bubblewrap=bwrap (1.14.x or older), or a similar option, then the version of bubblewrap that needs to be patched is a system copy that is distributed separately, typically /usr/bin/bwrap. This configuration is the one that is typically used in Linux distributions. If Flatpak has been configured at build-time with -Dsystembubblewrap= (1.15.x) or with --without-system-bubblewrap (1.14.x or older), then it is the bundled version of bubblewrap that is included with Flatpak that must be patched. This is typically installed as /usr/libexec/flatpak-bwrap. This configuration is the default when building from source code.

For the 1.14.x stable branch, these changes are included in Flatpak 1.14.10. The bundled version of bubblewrap included in this release has been updated to 0.6.3. For the 1.15.x development branch, these changes are included in Flatpak 1.15.10. The bundled version of bubblewrap in this release is a Meson "wrap" subproject, which has been updated to 0.10.0. The 1.12.x and 1.10.x branches will not be updated for this vulnerability. Long-term support OS distributions should backport the individual changes into their versions of Flatpak and bubblewrap, or update to newer versions if their stability policy allows it. As a workaround, avoid using applications using the persistent (--persist) permission.

1 / 4
Source: NVD
First published (updated )

Contact

SecAlerts Pty Ltd.
132 Wickham Terrace
Fortitude Valley,
QLD 4006, Australia
info@secalerts.co
By using SecAlerts services, you agree to our services end-user license agreement. This website is safeguarded by reCAPTCHA and governed by the Google Privacy Policy and Terms of Service. All names, logos, and brands of products are owned by their respective owners, and any usage of these names, logos, and brands for identification purposes only does not imply endorsement. If you possess any content that requires removal, please get in touch with us.
© 2026 SecAlerts Pty Ltd.
ABN: 70 645 966 203, ACN: 645 966 203