An earlier fix for an Inter-process Communication (IPC) vulnerability, CVE-2011-3079, added authentication to communication between IPC endpoints and server parents during IPC process creation. This authentication is insufficient for channels created after the IPC process is started, leading to the authentication not being correctly applied to later channels. This could allow for a sandbox escape through IPC channels due to lack of message validation in the listener process.

Last updated 25 August 2025

The iframe sandbox rules were not correctly applied to XSLT stylesheets, allowing an iframe to bypass restrictions such as executing scripts or navigating the top-level frame.

Redis is prone to a (Debian-specific) Lua sandbox escape, which could result in remote code execution.

An elevation of privilege vulnerability exists when an attacker establishes a vulnerable Netlogon secure channel connection to a domain controller, using the Netlogon Remote Protocol (MS-NRPC). An attacker who successfully exploited the vulnerability could run a specially crafted application on a device on the network. To exploit the vulnerability, an unauthenticated attacker would be required to use MS-NRPC to connect to a domain controller to obtain domain administrator access. Microsoft is addressing the vulnerability in a phased two-part rollout. These updates address the vulnerability by modifying how Netlogon handles the usage of Netlogon secure channels. For guidelines on how to manage the changes required for this vulnerability and more information on the phased rollout, see How to manage the changes in Netlogon secure channel connections associated with CVE-2020-1472 (updated September 28, 2020). When the second phase of Windows updates become available in Q1 2021, customers will be notified via a revision to this security vulnerability. If you wish to be notified when these updates are released, we recommend that you register for the security notifications mailer to be alerted of content changes to this advisory. See Microsoft Technical Security Notifications.

FasterXML jackson-databind 2.x before 2.9.7 might allow remote attackers to conduct server-side request forgery (SSRF) attacks by leveraging failure to block the axis2-jaxws class from polymorphic deserialization.

Redis before 2.8.21 and 3.x before 3.0.2 allows remote attackers to execute arbitrary Lua bytecode via the eval command.

ProFTPD contains an improper access control vulnerability that could allow remote attackers to read and write to arbitrary files via the site cpfr and site cpto commands.

In klibc 1.5.20 and 1.5.21, the DHCP options written by ipconfig to /tmp/net-$DEVICE.conf are not properly escaped. This may allow a remote attacker to send a specially crafted DHCP reply which could execute arbitrary code with the privileges of any process which sources DHCP options.

hw/input/ps2.c in Qemu does not validate 'rptr' and 'count' values during guest migration, leading to out-of-bounds access.

Summary

Log4j versions prior to 2.16.0 are subject to a remote code execution vulnerability via the ldap JNDI parser. As per Apache's Log4j security guide: Apache Log4j2 <=2.14.1 JNDI features used in configuration, log messages, and parameters do not protect against attacker controlled LDAP and other JNDI related endpoints. An attacker who can control log messages or log message parameters can execute arbitrary code loaded from LDAP servers when message lookup substitution is enabled. From log4j 2.16.0, this behavior has been disabled by default.

Log4j version 2.15.0 contained an earlier fix for the vulnerability, but that patch did not disable attacker-controlled JNDI lookups in all situations. For more information, see the Updated advice for version 2.16.0 section of this advisory.

Impact

Logging untrusted or user controlled data with a vulnerable version of Log4J may result in Remote Code Execution (RCE) against your application. This includes untrusted data included in logged errors such as exception traces, authentication failures, and other unexpected vectors of user controlled input.

Affected versions

Any Log4J version prior to v2.15.0 is affected to this specific issue.

The v1 branch of Log4J which is considered End Of Life (EOL) is vulnerable to other RCE vectors so the recommendation is to still update to 2.16.0 where possible.

Security releases Additional backports of this fix have been made available in versions 2.3.1, 2.12.2, and 2.12.3

Affected packages Only the org.apache.logging.log4j:log4j-core package is directly affected by this vulnerability. The org.apache.logging.log4j:log4j-api should be kept at the same version as the org.apache.logging.log4j:log4j-core package to ensure compatability if in use.

Remediation Advice

Updated advice for version 2.16.0

The Apache Logging Services team provided updated mitigation advice upon the release of version 2.16.0, which disables JNDI by default and completely removes support for message lookups. Even in version 2.15.0, lookups used in layouts to provide specific pieces of context information will still recursively resolve, possibly triggering JNDI lookups. This problem is being tracked as CVE-2021-45046. More information is available on the GitHub Security Advisory for CVE-2021-45046.

Users who want to avoid attacker-controlled JNDI lookups but cannot upgrade to 2.16.0 must ensure that no such lookups resolve to attacker-provided data and ensure that the the JndiLookup class is not loaded.

Please note that Log4J v1 is End Of Life (EOL) and will not receive patches for this issue. Log4J v1 is also vulnerable to other RCE vectors and we recommend you migrate to Log4J 2.16.0 where possible.

utility.c in telnetd in netkit telnet through 0.17 allows remote attackers to execute arbitrary code via short writes or urgent data, because of a buffer overflow involving the netclear and nextitem functions.

ecdsautils is a tiny collection of programs used for ECDSA (keygen, sign, verify). ecdsaverify[prepare]legacy() does not check whether the signature values r and s are non-zero. A signature consisting only of zeroes is always considered valid, making it trivial to forge signatures. Requiring multiple signatures from different public keys does not mitigate the issue: ecdsaverifylistlegacy() will accept an arbitrary number of such forged signatures. Both the ecdsautil verify CLI command and the libecdsautil library are affected. The issue has been fixed in ecdsautils 0.4.1. All older versions of ecdsautils (including versions before the split into a library and a CLI utility) are vulnerable.

diffoscope before 76 writes to arbitrary locations on disk based on the contents of an untrusted archive.

A flaw was found in xstream. A remote attacker, who has sufficient rights, can execute commands of the host by manipulating the processed input stream. The highest threat from this vulnerability is to data confidentiality and integrity as well as system availability.

Buffer overflow in PJSUA API when calling pjsuacalldump. An attacker-controlled 'buffer' argument may cause a buffer overflow, since supplying an output buffer smaller than 128 characters may overflow the output buffer, regardless of the 'maxlen' argument supplied

PJSIP is a free and open source multimedia communication library written in C language. In versions prior to and including 2.12 PJSIP there is a stack-buffer overflow vulnerability which only impacts PJSIP users who accept hashed digest credentials (credentials with datatype PJSIPCREDDATADIGEST). This issue has been patched in the master branch of the PJSIP repository and will be included with the next release. Users unable to upgrade need to check that the hashed digest data length must be equal to PJSIPMD5STRLEN before passing to PJSIP.

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In versions up to and including 2.11.1 when in a dialog set (or forking) scenario, a hash key shared by multiple UAC dialogs can potentially be prematurely freed when one of the dialogs is destroyed . The issue may cause a dialog set to be registered in the hash table multiple times (with different hash keys) leading to undefined behavior such as dialog list collision which eventually leading to endless loop. A patch is available in commit db3235953baa56d2fb0e276ca510fefca751643f which will be included in the next release. There are no known workarounds for this issue.

Stack overflow in PJSUA API when calling pjsuaplayercreate. An attacker-controlled 'filename' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

Stack overflow in PJSUA API when calling pjsuaplaylistcreate. An attacker-controlled 'filenames' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In affected versions if the incoming STUN message contains an ERROR-CODE attribute, the header length is not checked before performing a subtraction operation, potentially resulting in an integer underflow scenario. This issue affects all users that use STUN. A malicious actor located within the victim’s network may forge and send a specially crafted UDP (STUN) message that could remotely execute arbitrary code on the victim’s machine. Users are advised to upgrade as soon as possible. There are no known workarounds.

Stack overflow in PJSUA API when calling pjsuarecordercreate. An attacker-controlled 'filename' argument may cause a buffer overflow since it is copied to a fixed-size stack buffer without any size validation.

PJSIP is a free and open source multimedia communication library written in C. PJSIP versions 2.12 and prior do not parse incoming RTCP feedback RPSI (Reference Picture Selection Indication) packet, but any app that directly uses pjmediartcpfbparserpsi() will be affected. A patch is available in the master branch of the pjsip/pjproject GitHub repository. There are currently no known workarounds.

Drupal before 7.58, 8.x before 8.3.9, 8.4.x before 8.4.6, and 8.5.x before 8.5.1 allows remote attackers to execute arbitrary code because of an issue affecting multiple subsystems with default or common module configurations.

An issue was discovered in the base64d function in the SMTP listener in Exim before 4.90.1. By sending a handcrafted message, a buffer overflow may happen. This can be used to execute code remotely.

It was found that libcurl might accidentally leak authentication data to third parties.

When asked to send custom headers in its HTTP requests, libcurl will send that set of headers first to the host in the initial URL but also, if asked to follow redirects and a 30X HTTP response code is returned, to the host mentioned in URL in the Location: response header value.

Sending the same set of headers to subsequest hosts is in particular a problem for applications that pass on custom Authorization: headers, as this header often contains privacy sensitive information or data that could allow others to impersonate the libcurl-using client's request.

This bug has existed since before curl 6.0.

A buffer overflow exists in curl 7.12.3 to and including curl 7.58.0 in the FTP URL handling that allows an attacker to cause a denial of service or worse.

Last updated 25 August 2025

Last updated 25 August 2025

An integer overflow during the parsing of XML using the Expat library.